* - ethernet io initialisation
*
* -----------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <cli.h>
#include <linux/ctype.h>
#include <commproc.h>
#include "mpc8xx.h"
#include <video_fb.h>
-/* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
-
extern void eeprom_init (void);
extern int eeprom_read (unsigned dev_addr, unsigned offset,
unsigned char *buffer, unsigned cnt);
int board_early_init_f (void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
int i;
/* check revision data */
- eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
+ eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
printf ("Enter revision number (0-9): %c ",
mhpcRevInfo.revision[0]);
- if (0 != readline (NULL)) {
+ if (0 != cli_readline(NULL)) {
mhpcRevInfo.revision[0] =
(char) toupper (console_buffer[0]);
}
printf ("Enter revision character (A-Z): %c ",
mhpcRevInfo.revision[1]);
- if (1 == readline (NULL)) {
+ if (1 == cli_readline(NULL)) {
mhpcRevInfo.revision[1] =
(char) toupper (console_buffer[0]);
}
printf ("Enter board name (V-XXXX-XXXX): %s ",
(char *) &mhpcRevInfo.board);
- if (11 == readline (NULL)) {
+ if (11 == cli_readline(NULL)) {
for (i = 0; i < 11; i++) {
mhpcRevInfo.board[i] =
(char) toupper (console_buffer[i]);
do {
printf ("\nEnter sensor number (0-255): %d ",
(int) mhpcRevInfo.sensor);
- if (0 != readline (NULL)) {
+ if (0 != cli_readline(NULL)) {
mhpcRevInfo.sensor =
(unsigned char)
simple_strtoul (console_buffer, NULL,
printf ("Enter serial number: %s ",
(char *) &mhpcRevInfo.serial);
- if (6 == readline (NULL)) {
+ if (6 == cli_readline(NULL)) {
for (i = 0; i < 6; i++) {
mhpcRevInfo.serial[i] = console_buffer[i];
}
}
printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
- if (12 == readline (NULL)) {
+ if (12 == cli_readline(NULL)) {
for (i = 0; i < 12; i += 2) {
mhpcRevInfo.etheraddr[i >> 1] =
(char) (16 *
}
/* setup new revision data */
- eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
32);
}
/* ------------------------------------------------------------------------- */
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
- memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
memctl->memc_mptpr = MPTPR_PTP_DIV64;
memctl->memc_mar = 0x00008800;
/*
* Map controller SDRAM bank 0
*/
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
udelay (200);
/*
* Map controller SDRAM bank 1
*/
- memctl->memc_or2 = CFG_OR2;
- memctl->memc_br2 = CFG_BR2;
+ memctl->memc_or2 = CONFIG_SYS_OR2;
+ memctl->memc_br2 = CONFIG_SYS_BR2;
/*
* Perform SDRAM initializsation sequence
{
unsigned int clut = 0;
unsigned char *penv;
- immap_t *immr = (immap_t *) CFG_IMMR;
+ immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/* enable video only on CLUT value */
if ((penv = (uchar *)getenv ("clut")) != NULL)
unsigned char r, unsigned char g, unsigned char b)
{
unsigned int lum;
- unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
+ unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00);
/* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
/* y = 0.299*R + 0.587*G + 0.114*B */