]> git.karo-electronics.de Git - karo-tx-uboot.git/blobdiff - board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
Add GPL-2.0+ SPDX-License-Identifier to source files
[karo-tx-uboot.git] / board / freescale / imx / ddr / mx6q_4x_mt41j128.cfg
index f4cae5eeb9899ab4ba937ae286e004d6861f1d43..bb6c60b4c3cc902b8d3e2d2fa5909c768b6d3b68 100644 (file)
@@ -2,25 +2,9 @@
  * Copyright (C) 2011 Freescale Semiconductor, Inc.
  * Jason Liu <r64343@freescale.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * SPDX-License-Identifier:    GPL-2.0+
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not write to the Free Software
- * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
- * MA 02110-1301 USA
- *
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
  * and create imximage boot image
  *
  * The syntax is taken as close as possible with the kwbimage
@@ -172,3 +156,14 @@ DATA 4 0x020e0010 0xF00000CF
 /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
 DATA 4 0x020e0018 0x007F007F
 DATA 4 0x020e001c 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en  = 1           --> CKO1 enabled
+ * cko1_div = 111  --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4 0x020c4060 0x000000fb