* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <spi.h>
#include <miiphy.h>
+#ifdef CONFIG_SYS_FSL_DDR2
+#include <fsl_ddr_sdram.h>
+#else
#include <spd_sdram.h>
+#endif
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
int fixed_sdram(void);
void sdram_init(void);
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
void ddr_enable_ecc(unsigned int dram_size);
#endif
int board_early_init_f (void)
{
- volatile u8* bcsr = (volatile u8*)CFG_BCSR;
+ volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
/* Enable flash write */
bcsr[1] &= ~0x01;
-#ifdef CFG_USE_MPC834XSYS_USB_PHY
+#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
/* Use USB PHY on SYS board */
bcsr[5] |= 0x02;
#endif
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- u32 msize = 0;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ phys_size_t msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
/* DDR SDRAM - Main SODIMM */
- im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
- msize = spd_sdram();
+#ifndef CONFIG_SYS_FSL_DDR2
+ msize = spd_sdram() * 1024 * 1024;
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ ddr_enable_ecc(msize);
+#endif
#else
- msize = fixed_sdram();
+ msize = fsl_ddr_sdram();
+#endif
+#else
+ msize = fixed_sdram() * 1024 * 1024;
#endif
/*
* Initialize SDRAM if it is on local bus.
*/
sdram_init();
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-
/* return total bus SDRAM size(bytes) -- DDR */
- return (msize * 1024 * 1024);
+ return msize;
}
#if !defined(CONFIG_SPD_EEPROM)
************************************************************************/
int fixed_sdram(void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- u32 msize = 0;
- u32 ddr_size;
- u32 ddr_size_log2;
-
- msize = CFG_DDR_SIZE;
- for (ddr_size = msize << 20, ddr_size_log2 = 0;
- (ddr_size > 1);
- ddr_size = ddr_size>>1, ddr_size_log2++) {
- if (ddr_size & 1) {
- return -1;
- }
- }
- im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE;
+ u32 ddr_size = msize << 20; /* DDR size in bytes */
+ u32 ddr_size_log2 = __ilog2(ddr_size);
+
+ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
#ifdef CONFIG_DDR_II
- im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
- im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
- im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
- im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
- im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
- im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
- im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CFG_DDR_MODE;
- im->ddr.sdram_mode2 = CFG_DDR_MODE2;
- im->ddr.sdram_interval = CFG_DDR_INTERVAL;
- im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+ im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
+ im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
+ im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+ im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
#else
- im->ddr.csbnds[2].csbnds = 0x0000000f;
- im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+
+#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
+#warning Chip select bounds is only configurable in 16MB increments
+#endif
+ im->ddr.csbnds[2].csbnds =
+ ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+ (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
+ CSBNDS_EA_SHIFT) & CSBNDS_EA);
+ im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
/* currently we use only one CS, so disable the other banks */
im->ddr.cs_config[0] = 0;
im->ddr.cs_config[1] = 0;
im->ddr.cs_config[3] = 0;
- im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.sdram_cfg =
SDRAM_CFG_SREN
/* for 32-bit mode burst length is 8 */
im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
#endif
- im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
- im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
#endif
udelay(200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
return msize;
}
-#endif/*!CFG_SPD_EEPROM*/
+#endif/*!CONFIG_SYS_SPD_EEPROM*/
int checkboard (void)
{
+ /*
+ * Warning: do not read the BCSR registers here
+ *
+ * There is a timing bug in the 8349E and 8349EA BCSR code
+ * version 1.2 (read from BCSR 11) that will cause the CFI
+ * flash initialization code to overwrite BCSR 0, disabling
+ * the serial ports and gigabit ethernet
+ */
+
puts("Board: Freescale MPC8349EMDS\n");
return 0;
}
/*
* if MPC8349EMDS is soldered with SDRAM
*/
-#if defined(CFG_BR2_PRELIM) \
- && defined(CFG_OR2_PRELIM) \
- && defined(CFG_LBLAWBAR2_PRELIM) \
- && defined(CFG_LBLAWAR2_PRELIM)
+#if defined(CONFIG_SYS_BR2_PRELIM) \
+ && defined(CONFIG_SYS_OR2_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
/*
* Initialize SDRAM memory on the Local Bus.
*/
void sdram_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile lbus83xx_t *lbc= &immap->lbus;
- uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile fsl_lbc_t *lbc = &immap->im_lbc;
+ uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
/*
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
*/
/* setup mtrpt, lsrt and lbcr for LB bus */
- lbc->lbcr = CFG_LBC_LBCR;
- lbc->mrtpr = CFG_LBC_MRTPR;
- lbc->lsrt = CFG_LBC_LSRT;
+ lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+ lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+ lbc->lsrt = CONFIG_SYS_LBC_LSRT;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
- lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
- lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
asm("sync");
/*1 times*/
*sdram_addr = 0xff;
udelay(100);
/* 0x58636733; mode register write operation */
- lbc->lsdmr = CFG_LBC_LSDMR_4;
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
-#ifdef CONFIG_HARD_SPI
+#ifdef CONFIG_MPC8XXX_SPI
#define SPI_CS_MASK 0x80000000
void spi_cs_activate(struct spi_slave *slave)
{
- volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+ volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat &= ~SPI_CS_MASK;
}
void spi_cs_deactivate(struct spi_slave *slave)
{
- volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+ volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat |= SPI_CS_MASK;
}