* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
int board_early_init_f(void)
{
/* IO0 clock at 480MHz */
- mx28_set_ioclk(MXC_IOCLK0, 480000);
+ mxs_set_ioclk(MXC_IOCLK0, 480000);
/* IO1 clock at 480MHz */
- mx28_set_ioclk(MXC_IOCLK1, 480000);
+ mxs_set_ioclk(MXC_IOCLK1, 480000);
/* SSP0 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
#ifdef CONFIG_CMD_USB
mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
gpio_direction_output(MX28_PAD_AUART2_RX__GPIO_3_8, 1);
#endif
+ /* Power on LCD */
+ gpio_direction_output(MX28_PAD_LCD_RESET__GPIO_3_30, 1);
+
+ /* Set contrast to maximum */
+ gpio_direction_output(MX28_PAD_PWM2__GPIO_3_18, 1);
+
return 0;
}
int dram_init(void)
{
- return mx28_dram_init();
+ return mxs_dram_init();
}
int board_init(void)
/* Configure MMC0 Power Enable */
gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
- return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp);
+ return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL);
}
#endif
#ifdef CONFIG_CMD_NET
-#define MII_OPMODE_STRAP_OVERRIDE 0x16
-#define MII_PHY_CTRL1 0x1e
-#define MII_PHY_CTRL2 0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
- miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
- miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
- if (phy == 3)
- miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
- return 0;
-}
-
int board_eth_init(bd_t *bis)
{
- struct mx28_clkctrl_regs *clkctrl_regs =
- (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct eth_device *dev;
int ret;
return -EINVAL;
}
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- puts("FEC MXS: Unable to register FEC0 mii postcall\n");
- return ret;
- }
-
dev = eth_get_dev_by_name("FEC1");
if (!dev) {
puts("FEC MXS: Unable to get FEC1 device entry\n");
return -EINVAL;
}
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- puts("FEC MXS: Unable to register FEC1 mii postcall\n");
- return ret;
- }
-
return ret;
}