powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7

[karo-tx-uboot.git] / board / matrix_vision / mergerbox / sm107.c

diff --git a/board/matrix_vision/mergerbox/sm107.c b/board/matrix_vision/mergerbox/sm107.c
deleted file mode 100644 (file)
index d24f926..0000000
--- a/board/matrix_vision/mergerbox/sm107.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <sm501.h>
-#include <pci.h>
-#include "../common/mv_common.h"
-
-#ifdef CONFIG_VIDEO
-static const SMI_REGS init_regs_800x480[] = {
-       /* set endianess to little endian */
-       {0x0005c, 0x00000000},
-       /* PCI drive 12mA */
-       {0x00004, 0x42401001},
-       /* current clock */
-       {0x0003c, 0x310a1818},
-       /* clocks for pm0... */
-       {0x00040, 0x0002184f},
-       {0x00044, 0x2a1a0a01},
-       /* GPIO */
-       {0x10008, 0x00000000},
-       {0x1000C, 0x00000000},
-       /* panel control regs */
-       {0x80000, 0x0f017106},
-       {0x80004, 0x0},
-       {0x80008, 0x0},
-       {0x8000C, 0x00000000},
-       {0x80010, 0x0c800c80},
-       /* width 0x320 */
-       {0x80014, 0x03200000},
-       /* height 0x1e0 */
-       {0x80018, 0x01E00000},
-       {0x8001C, 0x0},
-       {0x80020, 0x01df031f},
-       {0x80024, 0x041f031f},
-       {0x80028, 0x00800347},
-       {0x8002C, 0x020c01df},
-       {0x80030, 0x000201e9},
-       {0x80200, 0x00000000},
-       /* ZV[0:7] */
-       {0x00008, 0x00ff0000},
-       /* 24-Bit TFT */
-       {0x0000c, 0x3f000000},
-       {0, 0}
-};
-
-/*
- * Returns SM107 register base address. First thing called in the driver.
- */
-unsigned int board_video_init(void)
-{
-       pci_dev_t devbusfn;
-       u32 addr;
-
-       devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-       if (devbusfn != -1) {
-               pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
-                       (u32 *)&addr);
-               return addr & 0xfffffffe;
-       }
-
-       return 0;
-}
-
-/*
- * Called after initializing the SM501 and before clearing the screen.
- */
-void board_validate_screen(unsigned int base)
-{
-}
-
-/*
- * Returns SM107 framebuffer address
- */
-unsigned int board_video_get_fb(void)
-{
-       pci_dev_t devbusfn;
-       u32 addr;
-
-       devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-       if (devbusfn != -1) {
-               pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
-                       (u32 *)&addr);
-               addr &= 0xfffffffe;
-#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
-               addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
-#endif
-               return addr;
-       }
-
-       printf("board_video_get_fb(): FAILED\n");
-
-       return 0;
-}
-
-/*
- * Return a pointer to the initialization sequence.
- */
-const SMI_REGS *board_get_regs(void)
-{
-       return init_regs_800x480;
-}
-
-int board_get_width(void)
-{
-       return 800;
-}
-
-int board_get_height(void)
-{
-       return 480;
-}
-#endif