*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- char *src;
+ char buf[64];
int f;
- char *s = getenv("serial#");
+ int i = getenv_f("serial#", buf, sizeof(buf));
+#ifdef CONFIG_PCI
+ char *src;
+#endif
puts("Board: Socrates");
- if (s != NULL) {
+ if (i > 0) {
puts(", serial# ");
- puts(s);
+ puts(buf);
}
putc('\n');
int misc_init_r (void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
/*
* Adjust flash start and offset to detected values
*/
* Check if boot FLASH isn't max size
*/
if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
- memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
- memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+ set_lbc_or(0, gd->bd->bi_flashstart |
+ (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+ set_lbc_br(0, gd->bd->bi_flashstart |
+ (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
/*
* Re-check to get correct base address
* Check if only one FLASH bank is available
*/
if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
- memctl->or1 = 0;
- memctl->br1 = 0;
+ set_lbc_or(1, 0);
+ set_lbc_br(1, 0);
/*
* Re-do flash protection upon new addresses
/* Redundant environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+ CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
&flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
}
*/
void local_bus_init (void)
{
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
sys_info_t sysinfo;
uint clkdiv;
get_sys_info (&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
if (lbc_mhz >= 66)
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-#define CONFIG_SYS_LIME_SRST ((CONFIG_SYS_LIME_BASE) + 0x01FC002C)
-#define CONFIG_SYS_LIME_CCF ((CONFIG_SYS_LIME_BASE) + 0x01FC0038)
-#define CONFIG_SYS_LIME_MMR ((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC)
-/* Lime clock frequency */
-#define CONFIG_SYS_LIME_CLK_100MHZ 0x00000
-#define CONFIG_SYS_LIME_CLK_133MHZ 0x10000
-/* SDRAM parameter */
-#define CONFIG_SYS_LIME_MMR_VALUE 0x4157BA63
-
-#define DISPLAY_WIDTH 800
-#define DISPLAY_HEIGHT 480
#define DEFAULT_BRIGHTNESS 25
#define BACKLIGHT_ENABLE (1 << 31)
return init_regs;
}
-#define CONFIG_SYS_LIME_CID ((CONFIG_SYS_LIME_BASE) + 0x01FC00F0)
-#define CONFIG_SYS_LIME_REV ((CONFIG_SYS_LIME_BASE) + 0x01FF8084)
int lime_probe(void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
uint cfg_br2;
uint cfg_or2;
- uint reg;
+ int type;
- cfg_br2 = memctl->br2;
- cfg_or2 = memctl->or2;
+ cfg_br2 = get_lbc_br(2);
+ cfg_or2 = get_lbc_or(2);
/* Configure GPCM for CS2 */
- memctl->br2 = 0;
- memctl->or2 = 0xfc000410;
- memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
-
- /* Try to access GDC ID/Revision registers */
- reg = in_be32((void *)CONFIG_SYS_LIME_CID);
- reg = in_be32((void *)CONFIG_SYS_LIME_CID);
- if (reg == 0x303) {
- reg = in_be32((void *)CONFIG_SYS_LIME_REV);
- reg = in_be32((void *)CONFIG_SYS_LIME_REV);
- reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0;
- } else
- reg = 0;
+ set_lbc_br(2, 0);
+ set_lbc_or(2, 0xfc000410);
+ set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);
+
+ /* Get controller type */
+ type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
/* Restore previous CS2 configuration */
- memctl->br2 = 0;
- memctl->or2 = cfg_or2;
- memctl->br2 = cfg_br2;
- return reg;
+ set_lbc_br(2, 0);
+ set_lbc_or(2, cfg_or2);
+ set_lbc_br(2, cfg_br2);
+
+ return (type == MB862XX_TYPE_LIME) ? 1 : 0;
}
/* Returns Lime base address */
if (!lime_probe())
return 0;
- /*
- * Reset Lime controller
- */
- out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1);
- udelay(200);
-
- /* Set Lime clock to 133MHz */
- out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ);
- /* Delay required */
- udelay(300);
- /* Set memory parameters */
- out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE);
-
- mb862xx.winSizeX = DISPLAY_WIDTH;
- mb862xx.winSizeY = DISPLAY_HEIGHT;
+ mb862xx.winSizeX = 800;
+ mb862xx.winSizeY = 480;
mb862xx.gdfIndex = GDF_15BIT_555RGB;
mb862xx.gdfBytesPP = 2;