/*
- * Copyright (C) 2003 Embedded Edge, LLC
+ * Copyright (C) 2004 Embedded Edge, LLC
* Dan Malek <dan@embeddededge.com>
* Copied from ADS85xx.
* Updates for Silicon Tx GP3 8560. We only support 32-bit flash
* and DDR with SPD EEPROM configuration.
*
+ * Copyright 2004 Freescale Semiconductor.
* Copyright (C) 2002,2003, Motorola Inc.
* Xianghua Xiao <X.Xiao@motorola.com>
*
#include <config.h>
#include <mpc85xx.h>
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
#define entry_start \
mflr r1 ; \
bl 0f ;
mtlr r1 ; \
blr ;
-/* TLB1 entries configuration: */
.section .bootpg, "ax"
.globl tlb1_entry
tlb1_entry:
entry_start
- /* If RAMBOOT, we are testing and the BDI has set up
- * much of the MMU already.
- * TLB 4,5 SDRAM
- * TLB 15 is default CCSRBAR.
- */
- .long 0x09 /* the following data table uses a few of 16 TLB entries */
-
- .long TLB1_MAS0(1,1,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,2,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,3,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_LBC_LCLDEVS_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_LBC_LCLDEVS_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
- .long TLB1_MAS0(1,4,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,5,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,6,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
-#if defined(CONFIG_RAM_AS_FLASH)
- .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-#else
- .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
-#endif
- .long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long 13
- .long TLB1_MAS0(1,7,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
-#ifdef CONFIG_L2_INIT_RAM
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
#else
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+#error("Update the number of table entries in tlb1_entry")
#endif
- .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
- .long TLB1_MAS0(1,8,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ /*
+ * TLB0 16K Cacheable, non-guarded
+ * 0xd001_0000 16K Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), \
+ 0,0,0,0,0,1,0,1,0,1)
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-#else
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ .long TLB1_MAS0(1, 0, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ .long TLB1_MAS0(1, 1, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ .long TLB1_MAS0(1, 2, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000), \
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ .long TLB1_MAS0(1, 3, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ .long TLB1_MAS0(1, 4, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000), \
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ .long TLB1_MAS0(1, 5, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ .long TLB1_MAS0(1, 6, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 7: 16K Non-cacheable, guarded
+ * 0xfc000000 16K Configuration Latch register
+ */
+ .long TLB1_MAS0(1, 7, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64K)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_LCLDEVS_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_LCLDEVS_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 8, 9: 128M DDR
+ * 0x00000000 64M DDR System memory
+ * 0x04000000 64M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+#error("Update the number of table entries in tlb1_entry")
+ .long TLB1_MAS0(1, 8, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1, 9, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
+ 0,0,0,0,0,1,0,1,0,1)
#endif
+
entry_end
-/* LAW(Local Access Window) configuration:
- * 0000_0000-8000_0000: Up to 2G DDR
- * f000_0000-f3ff_ffff: PCI(256M)
- * f400_0000-f7ff_ffff: RapidIO(128M)
- * f800_0000-ffff_ffff: localbus(128M)
- * f800_0000-fbff_ffff: LBC SDRAM(64M)
- * fc00_0000-fcff_ffff: LBC BCSR (1M, Chip select 1)
- * fdf0_0000-fdff_ffff: CCSRBAR(1M)
- * ff00_0000-ffff_ffff: Flash(16M)
- * We don't need a local window for CCSRBAR and flash because they
- * reside in their default mapped spaces.
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xfc00_0000 0xfc00_ffff Config Latch 64K
+ * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
*/
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_2G)) & ~LAWAR_EN)
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#if !defined(CONFIG_RAM_AS_FLASH)
+/*
+ * This is not so much the SDRAM map as it is the whole localbus map.
+ */
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR2 0
-#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/*
+ * Rapid IO at 0xc000_0000 for 512 M
+ */
+#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
.section .bootpg, "ax"
- .globl law_entry
+ .globl law_entry
law_entry:
entry_start
- .long 0x03
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+ .long 0x05
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+ .long LAWBAR4,LAWAR4
entry_end
projects / karo-tx-uboot.git / blobdiff