TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller

[karo-tx-uboot.git] / board / tqm5200 / cmd_stk52xx.c

diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index b746679afaa0561729c4fdd56ffff332d2499d9c..27a6c4163deb1e5919722807b054b1a5eb7d9c39 100644 (file)
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -561,7 +561,7 @@ void led_init(void)
        gpt->gpt6.emsr |=  0x00000024;
        gpt->gpt7.emsr |=  0x00000024;
 
-
+#ifndef CONFIG_TQM5200S
        /* enable SM501 GPIO control (in both power modes) */
        *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
                POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
 
        /* configure SM501 gpio pins 48-51 as output */
        *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
 }
 
 /*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
                        gpt->gpt7.emsr &=  ~(1 << 4);
                }
                break;
-
+#ifndef CONFIG_TQM5200S
        case 24:
                if (strcmp (argv[3], "on") == 0) {
                        *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
                                ~(0x1 << 19);
                }
                break;
-
+#endif /* !CONFIG_TQM5200S */
        default:
                printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
                return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
        return error_status;
 }
 
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 static void sm501_backlight (unsigned int state)
 {
        if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
                *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
                        ~((1 << 26) | (1 << 27));
 }
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                        else
                                printf ("Error\n");
                        return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
                } else if (strncmp (argv[1], "backlight", 4) == 0) {
                        if (strncmp (argv[2], "on", 2) == 0) {
                                sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                                sm501_backlight (BL_OFF);
                                return 0;
                        }
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
                }
                break;
 
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
        "     - loopback plug for X83 required\n"
        "fkt rs232 number\n"
        "     - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
        "fkt backlight on/off\n"
        "     - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
 );
 #elif defined(CONFIG_FO300)
 U_BOOT_CMD(