For more details about Wandboard, please refer to:
http://www.wandboard.org/
-Building U-boot for Wandboard
+Building U-Boot for Wandboard
-----------------------------
To build U-Boot for the Wandboard:
$ make wandboard_config
$ make
-Flashing U-boot into the SD card
+Flashing U-Boot into the SD card
--------------------------------
- After the 'make' command completes, the generated 'SPL' binary must be
- Connect the serial cable to the host PC
-- Power up the board and U-boot messages will appear in the serial console.
+- Power up the board and U-Boot messages will appear in the serial console.