powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board

[karo-tx-uboot.git] / board / xes / xpedite517x / ddr.c

diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 981bf41e0960291388d18fa1e8552672fc80f273..3a6e297f457173dae9cd1610a5044fe732781d81 100644 (file)
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -26,35 +26,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
        i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
                sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-                       unsigned int ctrl_num)
-{
-       unsigned int i;
-       unsigned int i2c_address = 0;
-
-       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-               if (ctrl_num == 0) {
-                       i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
-               } else if (ctrl_num == 1) {
-                       i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
-               } else {
-                       /* An inalid ctrl number was give, use default SPD */
-                       printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
-                       i2c_address = SPD_EEPROM_ADDRESS1;
-               }
-
-               get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-       }
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are: