menu "Command line interface"
- depends on !SPL_BUILD
+
+config HUSH_PARSER
+ bool "Use hush shell"
+ select SYS_HUSH_PARSER
+ help
+ This option enables the "hush" shell (from Busybox) as command line
+ interpreter, thus enabling powerful command line syntax like
+ if...then...else...fi conditionals or `&&' and '||'
+ constructs ("shell scripts").
+
+ If disabled, you get the old, much simpler behaviour with a somewhat
+ smaller memory footprint.
+
+config SYS_HUSH_PARSER
+ bool
+ help
+ Backward compatibility.
+
+config SYS_PROMPT
+ string "Shell prompt"
+ default "=> "
+ help
+ This string is displayed in the command line to the left of the
+ cursor.
+
+menu "Autoboot options"
+
+config AUTOBOOT_KEYED
+ bool "Stop autobooting via specific input key / string"
+ default n
+ help
+ This option enables stopping (aborting) of the automatic
+ boot feature only by issuing a specific input key or
+ string. If not enabled, any input key will abort the
+ U-Boot automatic booting process and bring the device
+ to the U-Boot prompt for user input.
+
+config AUTOBOOT_PROMPT
+ string "Autoboot stop prompt"
+ depends on AUTOBOOT_KEYED
+ default "Autoboot in %d seconds\\n"
+ help
+ This string is displayed before the boot delay selected by
+ CONFIG_BOOTDELAY starts. If it is not defined there is no
+ output indicating that autoboot is in progress.
+
+ Note that this define is used as the (only) argument to a
+ printf() call, so it may contain '%' format specifications,
+ provided that it also includes, sepearated by commas exactly
+ like in a printf statement, the required arguments. It is
+ the responsibility of the user to select only such arguments
+ that are valid in the given context.
+
+config AUTOBOOT_ENCRYPTION
+ bool "Enable encryption in autoboot stopping"
+ depends on AUTOBOOT_KEYED
+ default n
+
+config AUTOBOOT_DELAY_STR
+ string "Delay autobooting via specific input key / string"
+ depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+ help
+ This option delays the automatic boot feature by issuing
+ a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
+ or the environment variable "bootdelaykey" is specified
+ and this string is received from console input before
+ autoboot starts booting, U-Boot gives a command prompt. The
+ U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
+ used, otherwise it never times out.
+
+config AUTOBOOT_STOP_STR
+ string "Stop autobooting via specific input key / string"
+ depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+ help
+ This option enables stopping (aborting) of the automatic
+ boot feature only by issuing a specific input key or
+ string. If CONFIG_AUTOBOOT_STOP_STR or the environment
+ variable "bootstopkey" is specified and this string is
+ received from console input before autoboot starts booting,
+ U-Boot gives a command prompt. The U-Boot prompt never
+ times out, even if CONFIG_BOOT_RETRY_TIME is used.
+
+config AUTOBOOT_KEYED_CTRLC
+ bool "Enable Ctrl-C autoboot interruption"
+ depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+ default n
+ help
+ This option allows for the boot sequence to be interrupted
+ by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
+ Setting this variable provides an escape sequence from the
+ limited "password" strings.
+
+config AUTOBOOT_STOP_STR_SHA256
+ string "Stop autobooting via SHA256 encrypted password"
+ depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
+ help
+ This option adds the feature to only stop the autobooting,
+ and therefore boot into the U-Boot prompt, when the input
+ string / password matches a values that is encypted via
+ a SHA256 hash and saved in the environment.
+
+endmenu
+
+comment "Commands"
+
+menu "Info commands"
+
+config CMD_BDI
+ bool "bdinfo"
+ default y
+ help
+ Print board info
+
+config CMD_CONSOLE
+ bool "coninfo"
+ default y
+ help
+ Print console devices and information.
+
+config CMD_CPU
+ bool "cpu"
+ help
+ Print information about available CPUs. This normally shows the
+ number of CPUs, type (e.g. manufacturer, architecture, product or
+ internal name) and clock frequency. Other information may be
+ available depending on the CPU driver.
+
+config CMD_LICENSE
+ bool "license"
+ help
+ Print GPL license text
+
+endmenu
+
+menu "Boot commands"
+
+config CMD_BOOTD
+ bool "bootd"
+ default y
+ help
+ Run the command stored in the environment "bootcmd", i.e.
+ "bootd" does the same thing as "run bootcmd".
config CMD_BOOTM
- bool "Enable bootm command"
+ bool "bootm"
default y
help
Boot an application image from the memory.
-config CMD_CRC32
- bool "Enable crc32 command"
+config CMD_BOOTZ
+ bool "bootz"
default y
help
- Compute CRC32.
+ Boot a Linux kernel zImage.
+
+config CMD_BOOTCE
+ bool "bootce"
+ help
+ Boot a WindowsCE image.
+
+config CMD_GO
+ bool "go"
+ default y
+ help
+ Start an application at a given address.
+
+config CMD_RUN
+ bool "run"
+ default y
+ help
+ Run the command in the given environment variable.
+
+config CMD_IMI
+ bool "iminfo"
+ default y
+ help
+ Print header information for application image.
+
+config CMD_IMLS
+ bool "imls"
+ default !SYS_NO_FLASH
+ help
+ List all images found in flash
+
+config CMD_XIMG
+ bool "imxtract"
+ default y
+ help
+ Extract a part of a multi-image.
+
+endmenu
+
+menu "DTB support"
+
+config OF_LIBFDT
+ bool "Enable FDT commands"
+
+config OF_BOARD_SETUP
+ bool "Support DT modifications by board code"
+ depends on OF_LIBFDT
+
+endmenu
+
+menu "Environment commands"
config CMD_EXPORTENV
- bool "Enable env export command"
+ bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
- bool "Enable env import command"
+ bool "env import"
default y
help
Import environments.
-config CMD_GO
- bool "Enable go command"
+config CMD_EDITENV
+ bool "editenv"
default y
help
- Start an application at a given address.
+ Edit environment variable.
+
+config CMD_SAVEENV
+ bool "saveenv"
+ default y
+ help
+ Save all environment variables into the compiled-in persistent
+ storage.
+
+config CMD_ENV_EXISTS
+ bool "env exists"
+ default y
+ help
+ Check if a variable is defined in the environment for use in
+ shell scripting.
+
+endmenu
+
+menu "Memory commands"
+
+config CMD_MEMORY
+ bool "md, mm, nm, mw, cp, cmp, base, loop"
+ default y
+ help
+ Memeory commands.
+ md - memory display
+ mm - memory modify (auto-incrementing address)
+ nm - memory modify (constant address)
+ mw - memory write (fill)
+ cp - memory copy
+ cmp - memory compare
+ base - print or set address offset
+ loop - initinite loop on address range
+
+config CMD_CRC32
+ bool "crc32"
+ default y
+ help
+ Compute CRC32.
+
+config LOOPW
+ bool "loopw"
+ help
+ Infinite write loop on address range
+
+config CMD_MEMTEST
+ bool "memtest"
+ help
+ Simple RAM read/write test.
+
+config CMD_MX_CYCLIC
+ bool "mdc, mwc"
+ help
+ mdc - memory display cyclic
+ mwc - memory write cyclic
+
+config CMD_MEMINFO
+ bool "meminfo"
+ help
+ Display memory information.
+
+endmenu
+
+menu "Device access commands"
+
+config CMD_DM
+ bool "dm - Access to driver model information"
+ depends on DM
+ default y
+ help
+ Provides access to driver model data structures and information,
+ such as a list of devices, list of uclasses and the state of each
+ device (e.g. activated). This is not required for operation, but
+ can be useful to see the state of driver model for debugging or
+ interest.
+
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
+config CMD_LOADB
+ bool "loadb"
+ default y
+ help
+ Load a binary file over serial line.
+
+config CMD_LOADS
+ bool "loads"
+ default y
+ help
+ Load an S-Record file over serial line
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ default y if !SYS_NO_FLASH
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_ARMFLASH
+ depends on FLASH_CFI_DRIVER
+ bool "armflash"
+ help
+ ARM Ltd reference designs flash partition access
+
+config MTD_DEVICE
+ bool "MTD device support"
+
+config CMD_MTDPARTS
+ bool "MTD partitioning support"
+ default y
+ depends on MTD_DEVICE && (CMD_FLASH || CMD_NAND)
+
+config CMD_NAND
+ bool "nand"
+ help
+ NAND support.
+
+config CMD_NAND_TRIMFFS
+ bool "Enable nand write.trimffs command"
+ help
+ Enable command to leave page sized runs of 0xff patterns in
+ erased state rather than overwriting them. This is required
+ for using NAND flash filesystems on NAND controllers with
+ a non-0xff ECC code for all 0xff data.
+
+config CMD_ROMUPDATE
+ bool
+ depends on NAND
+
+config CMD_MMC
+ bool "mmc/sd"
+ select PARTITIONS
+ help
+ MMC/SD support.
+
+config CMD_SF
+ bool "sf"
+ help
+ SPI Flash support
+
+config CMD_SPI
+ bool "sspi"
+ help
+ SPI utility command.
+
+config CMD_I2C
+ bool "i2c"
+ help
+ I2C support.
+
+config CMD_USB
+ bool "usb"
+ help
+ USB support.
+
+config CMD_FPGA
+ bool "fpga"
+ default y
+ help
+ FPGA support.
+
+endmenu
+
+
+menu "Shell scripting commands"
+
+config CMD_ECHO
+ bool "echo"
+ default y
+ help
+ Echo args to console
+
+config CMD_ITEST
+ bool "itest"
+ default y
+ help
+ Return true/false on integer compare.
+
+config CMD_SOURCE
+ bool "source"
+ default y
+ help
+ Run script from memory
+
+config CMD_SETEXPR
+ bool "setexpr"
+ default y
+ help
+ Evaluate boolean and math expressions and store the result in an env
+ variable.
+ Also supports loading the value at a memory location into a variable.
+ If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
+
+endmenu
+
+menu "Network commands"
+
+config CMD_NET
+ bool "bootp, tftpboot"
+ default y
+ select NET
+ default y
+ help
+ Network commands.
+ bootp - boot image via network using BOOTP/TFTP protocol
+ tftpboot - boot image via network using TFTP protocol
+
+config CMD_TFTPPUT
+ bool "tftp put"
+ help
+ TFTP put command, for uploading files to a server
+
+config CMD_TFTPSRV
+ bool "tftpsrv"
+ help
+ Act as a TFTP server and boot the first received file
+
+config CMD_RARP
+ bool "rarpboot"
+ help
+ Boot image via network using RARP/TFTP protocol
+
+config CMD_DHCP
+ bool "dhcp"
+ help
+ Boot image via network using DHCP/TFTP protocol
+
+if CMD_DHCP
+
+menu "DHCP options"
+
+config BOOTP_BOOTFILESIZE
+ bool "obtain bootfile size from DHCP"
+
+config BOOTP_BOOTPATH
+ bool "obtain bootfile path from DHCP"
+
+config BOOTP_DNS
+ bool "obtain DNS server IP address from DHCP"
+
+config BOOTP_DNS2
+ bool "store secondary DNS IP address in dnsip2"
+
+config BOOTP_GATEWAY
+ bool "obtain gateway IP address from DHCP"
+
+config BOOTP_ID_CACHE_SIZE
+ int "DHCP transaction ID cache size"
+ default 4
+ help
+ BOOTP packets are uniquely identified using a 32-bit ID. The
+ server will copy the ID from client requests to responses and
+ U-Boot will use this to determine if it is the destination of
+ an incoming response. Some servers will check that addresses
+ aren't in use before handing them out (usually using an ARP
+ ping) and therefore take up to a few hundred milliseconds to
+ respond. Network congestion may also influence the time it
+ takes for a response to make it back to the client. If that
+ time is too long, U-Boot will retransmit requests. In order
+ to allow earlier responses to still be accepted after these
+ retransmissions, U-Boot's BOOTP client keeps a small cache of
+ IDs. The CONFIG_BOOTP_ID_CACHE_SIZE controls the size of this
+ cache. The default is to keep IDs for up to four outstanding
+ requests. Increasing this will allow U-Boot to accept offers
+ from a BOOTP client in networks with unusually high latency.
+
+config BOOTP_MAY_FAIL
+ bool "Do not start over, if DHCP server is not available"
+ help
+ If the DHCP server is not found after the configured retry
+ count, the call will fail instead of starting over. This
+ can be used to fail over to Link-local IP address
+ configuration if the DHCP server is not available.
+
+config BOOTP_NISDOMAIN
+ bool "obtain NIS domain from DHCP"
+
+config BOOTP_NTPSERVER
+ bool "obtain NTP server IP address from DHCP"
+
+config BOOTP_RANDOM_DELAY
+ bool "Use a (pseudo) random delay between DHCP retries"
+ select LIB_RAND
+
+config BOOTP_RANDOM_ID
+ bool "Generate a (pseudo) random transaction ID"
+ select LIB_RAND
+
+config BOOTP_SEND_HOSTNAME
+ bool "send hostname in DHCP request"
+
+config BOOTP_SUBNETMASK
+ bool "obtain subnet mask from DHCP"
+
+config BOOTP_TIMEOFFSET
+ bool "obtain from DHCP"
+
+config BOOTP_VENDOREX
+ bool "obtain from DHCP"
+
+endmenu
+
+endif
+
+config CMD_NFS
+ bool "nfs"
+ default y
+ help
+ Boot image via network using NFS protocol.
+
+config CMD_PING
+ bool "ping"
+ help
+ Send ICMP ECHO_REQUEST to network host
+
+config CMD_CDP
+ bool "cdp"
+ help
+ Perform CDP network configuration
+
+config CMD_SNTP
+ bool "sntp"
+ help
+ Synchronize RTC via network
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_LINK_LOCAL
+ bool "linklocal"
+ help
+ Acquire a network IP address using the link-local protocol
+
+config CMD_MII
+ bool "MII register access"
+ help
+ Support reading/writing ETH PHY registers via MII bus
+
+endmenu
+
+menu "Misc commands"
+
+config CMD_CACHE
+ bool "cache control"
+ help
+ Enable commands to switch data cache on/off.
+
+config CMD_TIME
+ bool "time"
+ help
+ Run commands and summarize execution time.
+
+config CMD_FUSE
+ bool "fuse read/write"
+ help
+ eFuse reading and programming support
+
+# TODO: rename to CMD_SLEEP
+config CMD_MISC
+ bool "sleep"
+ default y
+ help
+ Delay execution for some time
+
+config CMD_TIMER
+ bool "timer"
+ help
+ Access the system timer.
+
+config CMD_SETGETDCR
+ bool "getdcr, setdcr, getidcr, setidcr"
+ depends on 4xx
+ default y
+ help
+ getdcr - Get an AMCC PPC 4xx DCR's value
+ setdcr - Set an AMCC PPC 4xx DCR's value
+ getidcr - Get a register value via indirect DCR addressing
+ setidcr - Set a register value via indirect DCR addressing
+
+config CMD_SOUND
+ bool "sound"
+ depends on SOUND
+ help
+ This provides basic access to the U-Boot's sound support. The main
+ feature is to play a beep.
+
+ sound init - set up sound system
+ sound play - play a sound
+
+endmenu
+
+menu "Boot timing"
+
+config BOOTSTAGE
+ bool "Boot timing and reporting"
+ help
+ Enable recording of boot time while booting. To use it, insert
+ calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
+ bootstage.h. Only a single entry is recorded for each ID. You can
+ give the entry a name with bootstage_mark_name(). You can also
+ record elapsed time in a particular stage using bootstage_start()
+ before starting and bootstage_accum() when finished. Bootstage will
+ add up all the accumated time and report it.
+
+ Normally, IDs are defined in bootstage.h but a small number of
+ additional 'user' IDs can be used but passing BOOTSTAGE_ID_ALLOC
+ as the ID.
+
+ Calls to show_boot_progress() wil also result in log entries but
+ these will not have names.
+
+config BOOTSTAGE_REPORT
+ bool "Display a detailed boot timing report before booting the OS"
+ depends on BOOTSTAGE
+ help
+ Enable output of a boot time report just before the OS is booted.
+ This shows how long it took U-Boot to go through each stage of the
+ boot process. The report looks something like this:
+
+ Timer summary in microseconds:
+ Mark Elapsed Stage
+ 0 0 reset
+ 3,575,678 3,575,678 board_init_f start
+ 3,575,695 17 arch_cpu_init A9
+ 3,575,777 82 arch_cpu_init done
+ 3,659,598 83,821 board_init_r start
+ 3,910,375 250,777 main_loop
+ 29,916,167 26,005,792 bootm_start
+ 30,361,327 445,160 start_kernel
+
+config BOOTSTAGE_USER_COUNT
+ hex "Number of boot ID numbers available for user use"
+ default 20
+ help
+ This is the number of available user bootstage records.
+ Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
+ a new ID will be allocated from this stash. If you exceed
+ the limit, recording will stop.
+
+config CMD_BOOTSTAGE
+ bool "Enable the 'bootstage' command"
+ depends on BOOTSTAGE
+ help
+ Add a 'bootstage' command which supports printing a report
+ and un/stashing of bootstage data.
+
+config BOOTSTAGE_FDT
+ bool "Store boot timing information in the OS device tree"
+ depends on BOOTSTAGE
+ help
+ Stash the bootstage information in the FDT. A root 'bootstage'
+ node is created with each bootstage id as a child. Each child
+ has a 'name' property and either 'mark' containing the
+ mark time in microsecond, or 'accum' containing the
+ accumulated time for that bootstage id in microseconds.
+ For example:
+
+ bootstage {
+ 154 {
+ name = "board_init_f";
+ mark = <3575678>;
+ };
+ 170 {
+ name = "lcd";
+ accum = <33482>;
+ };
+ };
+
+ Code in the Linux kernel can find this in /proc/devicetree.
+
+config BOOTSTAGE_STASH
+ bool "Stash the boot timing information in memory before booting OS"
+ depends on BOOTSTAGE
+ help
+ Some OSes do not support device tree. Bootstage can instead write
+ the boot timing information in a binary format at a given address.
+ This happens through a call to bootstage_stash(), typically in
+ the CPU's cleanup_before_linux() function. You can use the
+ 'bootstage stash' and 'bootstage unstash' commands to do this on
+ the command line.
+
+config BOOTSTAGE_STASH_ADDR
+ hex "Address to stash boot timing information"
+ default 0
+ help
+ Provide an address which will not be overwritten by the OS when it
+ starts, so that it can read this information when ready.
+
+config BOOTSTAGE_STASH_SIZE
+ hex "Size of boot timing stash region"
+ default 4096
+ help
+ This should be large enough to hold the bootstage stash. A value of
+ 4096 (4KiB) is normally plenty.
+
+endmenu
+
+menu "Power commands"
+config CMD_PMIC
+ bool "Enable Driver Model PMIC command"
+ depends on DM_PMIC
+ help
+ This is the pmic command, based on a driver model pmic's API.
+ Command features are unchanged:
+ - list - list pmic devices
+ - pmic dev <id> - show or [set] operating pmic device (NEW)
+ - pmic dump - dump registers
+ - pmic read address - read byte of register at address
+ - pmic write address - write byte to register at address
+ The only one change for this command is 'dev' subcommand.
+
+config CMD_REGULATOR
+ bool "Enable Driver Model REGULATOR command"
+ depends on DM_REGULATOR
+ help
+ This command is based on driver model regulator's API.
+ User interface features:
+ - list - list regulator devices
+ - regulator dev <id> - show or [set] operating regulator device
+ - regulator info - print constraints info
+ - regulator status - print operating status
+ - regulator value <val] <-f> - print/[set] voltage value [uV]
+ - regulator current <val> - print/[set] current value [uA]
+ - regulator mode <id> - print/[set] operating mode id
+ - regulator enable - enable the regulator output
+ - regulator disable - disable the regulator output
+
+ The '-f' (force) option can be used for set the value which exceeds
+ the limits, which are found in device-tree and are kept in regulator's
+ uclass platdata structure.
+
+endmenu
+
+menu "Security commands"
+config CMD_TPM
+ bool "Enable the 'tpm' command"
+ depends on TPM
+ help
+ This provides a means to talk to a TPM from the command line. A wide
+ range of commands if provided - see 'tpm help' for details. The
+ command requires a suitable TPM on your board and the correct driver
+ must be enabled.
+
+config CMD_TPM_TEST
+ bool "Enable the 'tpm test' command"
+ depends on CMD_TPM
+ help
+ This provides a a series of tests to confirm that the TPM is working
+ correctly. The tests cover initialisation, non-volatile RAM, extend,
+ global lock and checking that timing is within expectations. The
+ tests pass correctly on Infineon TPMs but may need to be adjusted
+ for other devices.
+
+endmenu
+
+endmenu
+
+menu "Environment configuration settings"
+
+choice
+ prompt "Select environment non-volatile storage"
+
+config ENV_IS_NOWHERE
+ bool "do not store environment"
+
+config ENV_IS_IN_NAND
+ bool "store environment in NAND"
+ depends on NAND
+
+config ENV_IS_IN_MMC
+ bool "store environment in MMC"
+ depends on MMC
+
+config ENV_IS_IN_SPI_FLASH
+ bool "store environment in SPI flash"
+
+endchoice
+
+endmenu
+
+menu "Display configuration"
+
+config LCD
+ bool "LCD support"
+
+config DISPLAY_BOARDINFO
+ bool "Display board info"
endmenu