* (c) 1999 Machine Vision Holdings, Inc.
* (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
*
+ * Added 16-bit nand support
+ * (C) 2004 Texas Instruments
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <asm/io.h>
+#include <watchdog.h>
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
#include <linux/mtd/nand_ids.h>
#include <jffs2/jffs2.h>
+#ifdef CONFIG_OMAP1510
+void archflashwp(void *archdata, int wp);
+#endif
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
+
/*
* Definition of the out of band configuration structure
*/
#define ALLOW_ERASE_BAD_DEBUG 0
#define CONFIG_MTD_NAND_ECC /* enable ECC */
-/* #define CONFIG_MTD_NAND_ECC_JFFS2 */
+#define CONFIG_MTD_NAND_ECC_JFFS2
/* bits for nand_rw() `cmd'; or together as needed */
#define NANDRW_READ 0x01
#define NANDRW_WRITE 0x00
#define NANDRW_JFFS2 0x02
+#define NANDRW_JFFS2_SKIP 0x04
/*
* Function Prototypes
*/
static void nand_print(struct nand_chip *nand);
-static int nand_rw (struct nand_chip* nand, int cmd,
+int nand_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf);
-static int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean);
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean);
static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
size_t * retlen, u_char *buf, u_char *ecc_code);
static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
size_t * retlen, u_char * buf);
static int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
size_t * retlen, const u_char * buf);
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait);
#ifdef CONFIG_MTD_NAND_ECC
static int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
static void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
/* read out-of-band data */
if (cmd & NANDRW_READ) {
ret = nand_read_oob(nand_dev_desc + curr_device,
- off, size, &total,
+ off, size, (size_t *)&total,
(u_char*)addr);
}
else {
ret = nand_write_oob(nand_dev_desc + curr_device,
- off, size, &total,
+ off, size, (size_t *)&total,
(u_char*)addr);
}
return ret;
}
else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2))
cmd |= NANDRW_JFFS2; /* skip bad blocks */
+ else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
+ }
#ifdef SXNI855T
/* need ".e" same as ".j" for compatibility with older units */
else if (cmdtail && !strcmp(cmdtail, ".e"))
cmd |= NANDRW_JFFS2; /* skip bad blocks */
#endif
+#ifdef CFG_NAND_SKIP_BAD_DOT_I
+ /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
+ /* ".i" for image -> read skips bad block (no 0xff) */
+ else if (cmdtail && !strcmp(cmdtail, ".i")) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
+ }
+#endif /* CFG_NAND_SKIP_BAD_DOT_I */
else if (cmdtail) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
curr_device, off, size);
ret = nand_rw(nand_dev_desc + curr_device, cmd, off, size,
- &total, (u_char*)addr);
+ (size_t *)&total, (u_char*)addr);
- printf ("%d bytes %s: %s\n", total,
- (cmd & NANDRW_READ) ? "read" : "write",
+ printf (" %d bytes %s: %s\n", total,
+ (cmd & NANDRW_READ) ? "read" : "written",
ret ? "ERROR" : "OK");
return ret;
"nand - NAND sub-system\n",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
- "nand read[.jffs2] addr off size\n"
+ "nand read[.jffs2[s]] addr off size\n"
"nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
" at offset `off' to/from memory address `addr'\n"
"nand erase [clean] [off size] - erase `size' bytes from\n"
* not marked bad, or no bad mark position is specified
* returns 1 if marked bad or otherwise invalid
*/
-int check_block(struct nand_chip* nand, unsigned long pos)
+int check_block (struct nand_chip *nand, unsigned long pos)
{
- int retlen;
+ size_t retlen;
uint8_t oob_data;
+ uint16_t oob_data16[6];
int page0 = pos & (-nand->erasesize);
int page1 = page0 + nand->oobblock;
int badpos = oob_config.badblock_pos;
if (badpos < 0)
return 0; /* no way to check, assume OK */
- /* Note - bad block marker can be on first or second page */
- if (nand_read_oob(nand, page0 + badpos, 1, &retlen, &oob_data) ||
- oob_data != 0xff ||
- nand_read_oob(nand, page1 + badpos, 1, &retlen, &oob_data) ||
- oob_data != 0xff)
- return 1;
+ if (nand->bus16) {
+ if (nand_read_oob(nand, (page0 + 0), 12, &retlen, (uint8_t *)oob_data16)
+ || (oob_data16[2] & 0xff00) != 0xff00)
+ return 1;
+ if (nand_read_oob(nand, (page1 + 0), 12, &retlen, (uint8_t *)oob_data16)
+ || (oob_data16[2] & 0xff00) != 0xff00)
+ return 1;
+ } else {
+ /* Note - bad block marker can be on first or second page */
+ if (nand_read_oob(nand, page0 + badpos, 1, &retlen, (unsigned char *)&oob_data)
+ || oob_data != 0xff
+ || nand_read_oob (nand, page1 + badpos, 1, &retlen, (unsigned char *)&oob_data)
+ || oob_data != 0xff)
+ return 1;
+ }
return 0;
}
* 1: NANDRW_READ read, fail on bad block
* 2: NANDRW_WRITE | NANDRW_JFFS2 write, skip bad blocks
* 3: NANDRW_READ | NANDRW_JFFS2 read, data all 0xff for bad blocks
+ * 7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks
*/
-static int nand_rw (struct nand_chip* nand, int cmd,
+int nand_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf)
{
- int noecc, ret = 0, n, total = 0;
+ int ret = 0, n, total = 0;
char eccbuf[6];
/* eblk (once set) is the start of the erase block containing the
* data being processed.
--len;
}
continue;
- }
- else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) {
+ } else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) {
+ start += erasesize;
+ continue;
+ } else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) {
/* skip bad block */
start += erasesize;
continue;
- }
- else {
+ } else {
ret = 1;
break;
}
}
/* The ECC will not be calculated correctly if
less than 512 is written or read */
- noecc = (start != (start | 0x1ff) + 1) || (len < 0x200);
- if (cmd & NANDRW_READ)
+ /* Is request at least 512 bytes AND it starts on a proper boundry */
+ if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200))
+ printf("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\n");
+
+ if (cmd & NANDRW_READ) {
ret = nand_read_ecc(nand, start,
min(len, eblk + erasesize - start),
- &n, (u_char*)buf,
- noecc ? NULL : eccbuf);
- else
+ (size_t *)&n, (u_char*)buf, (u_char *)eccbuf);
+ } else {
ret = nand_write_ecc(nand, start,
min(len, eblk + erasesize - start),
- &n, (u_char*)buf,
- noecc ? NULL : eccbuf);
+ (size_t *)&n, (u_char*)buf, (u_char *)eccbuf);
+ }
if (ret)
break;
/* ------------------------------------------------------------------------- */
-/* This function is needed to avoid calls of the __ashrdi3 function. */
-#if 0
-static int shr(int val, int shift)
-{
- return val >> shift;
-}
-#endif
-static int NanD_WaitReady(struct nand_chip *nand)
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait)
{
/* This is inline, to optimise the common case, where it's ready instantly */
int ret = 0;
- NAND_WAIT_READY(nand);
+#ifdef NAND_NO_RB /* in config file, shorter delays currently wrap accesses */
+ if(ale_wait)
+ NAND_WAIT_READY(nand); /* do the worst case 25us wait */
+ else
+ udelay(10);
+#else /* has functional r/b signal */
+ NAND_WAIT_READY(nand);
+#endif
return ret;
}
/* Lower the CLE line */
NAND_CTL_CLRCLE(nandptr);
- return NanD_WaitReady(nand);
+#ifdef NAND_NO_RB
+ if(command == NAND_CMD_RESET){
+ u_char ret_val;
+ NanD_Command(nand, NAND_CMD_STATUS);
+ do {
+ ret_val = READ_NAND(nandptr);/* wait till ready */
+ } while((ret_val & 0x40) != 0x40);
+ }
+#endif
+ return NanD_WaitReady(nand, 0);
}
/* NanD_Address: Set the current address for the flash chip */
ofs = ofs >> nand->page_shift;
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE)
- for (i = 0; i < nand->pageadrlen; i++, ofs = ofs >> 8)
+ if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
+ for (i = 0; i < nand->pageadrlen; i++, ofs = ofs >> 8) {
WRITE_NAND_ADDRESS(ofs, nandptr);
+ }
+ }
/* Lower the ALE line */
NAND_CTL_CLRALE(nandptr);
/* Wait for the chip to respond */
- return NanD_WaitReady(nand);
+ return NanD_WaitReady(nand, 1);
}
/* NanD_SelectChip: Select a given flash chip within the current floor */
static inline int NanD_SelectChip(struct nand_chip *nand, int chip)
{
/* Wait for it to be ready */
- return NanD_WaitReady(nand);
+ return NanD_WaitReady(nand, 0);
}
/* NanD_IdentChip: Identify a given NAND chip given {floor,chip} */
id = READ_NAND(nand->IO_ADDR);
NAND_DISABLE_CE(nand); /* set pin high */
- /* No response - return failure */
+
+#ifdef NAND_DEBUG
+ printf("NanD_Command (ReadID) got %x %x\n", mfr, id);
+#endif
if (mfr == 0xff || mfr == 0) {
- printf("NanD_Command (ReadID) got %d %d\n", mfr, id);
+ /* No response - return failure */
return 0;
}
* contain _one_ type of flash part, although that's not a
* hardware restriction. */
if (nand->mfr) {
- if (nand->mfr == mfr && nand->id == id)
+ if (nand->mfr == mfr && nand->id == id) {
return 1; /* This is another the same the first */
- else
+ } else {
printf("Flash chip at floor %d, chip %d is different:\n",
floor, chip);
+ }
}
/* Print and store the manufacturer and ID codes. */
nand->oobsize = 16;
nand->page_shift = 9;
}
- nand->pageadrlen =
- nand_flash_ids[i].pageadrlen;
- nand->erasesize =
- nand_flash_ids[i].erasesize;
- nand->chips_name =
- nand_flash_ids[i].name;
- return 1;
+ nand->pageadrlen = nand_flash_ids[i].pageadrlen;
+ nand->erasesize = nand_flash_ids[i].erasesize;
+ nand->chips_name = nand_flash_ids[i].name;
+ nand->bus16 = nand_flash_ids[i].bus16;
+ return 1;
}
return 0;
}
/* If there are none at all that we recognise, bail */
if (!nand->numchips) {
- puts ("No flash chips recognised.\n");
+#ifdef NAND_DEBUG
+ puts ("No NAND flash chips recognised.\n");
+#endif
return;
}
}
/* we need to be fast here, 1 us per read translates to 1 second per meg */
-static void NanD_ReadBuf(struct nand_chip *nand, u_char *data_buf, int cntr)
+static void NanD_ReadBuf (struct nand_chip *nand, u_char * data_buf, int cntr)
{
unsigned long nandptr = nand->IO_ADDR;
- while (cntr >= 16) {
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- *data_buf++ = READ_NAND(nandptr);
- cntr -= 16;
- }
-
- while (cntr > 0) {
- *data_buf++ = READ_NAND(nandptr);
- cntr--;
+ NanD_Command (nand, NAND_CMD_READ0);
+
+ if (nand->bus16) {
+ u16 val;
+
+ while (cntr >= 16) {
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ cntr -= 16;
+ }
+
+ while (cntr > 0) {
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ cntr -= 2;
+ }
+ } else {
+ while (cntr >= 16) {
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ cntr -= 16;
+ }
+
+ while (cntr > 0) {
+ *data_buf++ = READ_NAND (nandptr);
+ cntr--;
+ }
}
}
/* Do not allow reads past end of device */
if ((start + len) > nand->totlen) {
- printf ("%s: Attempt read beyond end of device %x %x %x\n", __FUNCTION__, (uint) start, (uint) len, (uint) nand->totlen);
+ printf ("%s: Attempt read beyond end of device %x %x %x\n",
+ __FUNCTION__, (uint) start, (uint) len, (uint) nand->totlen);
*retlen = 0;
return -1;
}
/* Loop until all data read */
while (*retlen < len) {
-
#ifdef CONFIG_MTD_NAND_ECC
-
/* Do we have this page in cache ? */
if (nand->cache_page == page)
goto readdata;
/* Send the read command */
NanD_Command(nand, NAND_CMD_READ0);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
/* Read in a page + oob data */
NanD_ReadBuf(nand, nand->data_buf, nand->oobblock + nand->oobsize);
/* copy data into cache, for read out of cache and if ecc fails */
- if (nand->data_cache)
- memcpy (nand->data_cache, nand->data_buf, nand->oobblock + nand->oobsize);
+ if (nand->data_cache) {
+ memcpy (nand->data_cache, nand->data_buf,
+ nand->oobblock + nand->oobsize);
+ }
/* Pick the ECC bytes out of the oob data */
- for (j = 0; j < 6; j++)
+ for (j = 0; j < 6; j++) {
ecc_code[j] = nand->data_buf[(nand->oobblock + oob_config.ecc_pos[j])];
+ }
/* Calculate the ECC and verify it */
/* If block was not written with ECC, skip ECC */
#else
/* Send the read command */
NanD_Command(nand, NAND_CMD_READ0);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
/* Read the data directly into the return buffer */
if ((*retlen + (nand->oobblock - col)) >= len) {
NanD_ReadBuf(nand, buf + *retlen, len - *retlen);
{
int i;
-#ifdef CONFIG_MTD_NAND_ECC
unsigned long nandptr = nand->IO_ADDR;
+
+#ifdef CONFIG_MTD_NAND_ECC
#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
int ecc_bytes = (nand->oobblock == 512) ? 6 : 3;
#endif
/* Read back previous written data, if col > 0 */
if (col) {
- NanD_Command(nand, NAND_CMD_READ0);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
- for (i = 0; i < col; i++)
- nand->data_buf[i] = READ_NAND (nandptr);
+ NanD_Command (nand, NAND_CMD_READ0);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ if (nand->bus16) {
+ u16 val;
+
+ for (i = 0; i < col; i += 2) {
+ val = READ_NAND (nandptr);
+ nand->data_buf[i] = val & 0xff;
+ nand->data_buf[i + 1] = val >> 8;
+ }
+ } else {
+ for (i = 0; i < col; i++)
+ nand->data_buf[i] = READ_NAND (nandptr);
+ }
}
/* Calculate and write the ECC if we have enough data */
if ((col < nand->eccsize) && (last >= nand->eccsize)) {
nand_calculate_ecc (&nand->data_buf[0], &(ecc_code[0]));
- for (i = 0; i < 3; i++)
- nand->data_buf[(nand->oobblock + oob_config.ecc_pos[i])] = ecc_code[i];
- if (oob_config.eccvalid_pos != -1)
- nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] = 0xf0;
+ for (i = 0; i < 3; i++) {
+ nand->data_buf[(nand->oobblock +
+ oob_config.ecc_pos[i])] = ecc_code[i];
+ }
+ if (oob_config.eccvalid_pos != -1) {
+ nand->data_buf[nand->oobblock +
+ oob_config.eccvalid_pos] = 0xf0;
+ }
}
/* Calculate and write the second ECC if we have enough data */
if ((nand->oobblock == 512) && (last == nand->oobblock)) {
nand_calculate_ecc (&nand->data_buf[256], &(ecc_code[3]));
- for (i = 3; i < 6; i++)
- nand->data_buf[(nand->oobblock + oob_config.ecc_pos[i])] = ecc_code[i];
- if (oob_config.eccvalid_pos != -1)
- nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] &= 0x0f;
+ for (i = 3; i < 6; i++) {
+ nand->data_buf[(nand->oobblock +
+ oob_config.ecc_pos[i])] = ecc_code[i];
+ }
+ if (oob_config.eccvalid_pos != -1) {
+ nand->data_buf[nand->oobblock +
+ oob_config.eccvalid_pos] &= 0x0f;
+ }
}
#endif
/* Prepad for partial page programming !!! */
nand->data_buf[i] = 0xff;
/* Send command to begin auto page programming */
- NanD_Command(nand, NAND_CMD_READ0);
- NanD_Command(nand, NAND_CMD_SEQIN);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ NanD_Command (nand, NAND_CMD_READ0);
+ NanD_Command (nand, NAND_CMD_SEQIN);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
/* Write out complete page of data */
- for (i = 0; i < (nand->oobblock + nand->oobsize); i++)
- WRITE_NAND(nand->data_buf[i], nand->IO_ADDR);
+ if (nand->bus16) {
+ for (i = 0; i < (nand->oobblock + nand->oobsize); i += 2) {
+ WRITE_NAND (nand->data_buf[i] +
+ (nand->data_buf[i + 1] << 8),
+ nand->IO_ADDR);
+ }
+ } else {
+ for (i = 0; i < (nand->oobblock + nand->oobsize); i++)
+ WRITE_NAND (nand->data_buf[i], nand->IO_ADDR);
+ }
/* Send command to actually program the data */
- NanD_Command(nand, NAND_CMD_PAGEPROG);
- NanD_Command(nand, NAND_CMD_STATUS);
-
+ NanD_Command (nand, NAND_CMD_PAGEPROG);
+ NanD_Command (nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+ {
+ u_char ret_val;
+
+ do {
+ ret_val = READ_NAND (nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
/* See if device thinks it succeeded */
- if (READ_NAND(nand->IO_ADDR) & 0x01) {
- printf ("%s: Failed write, page 0x%08x, ", __FUNCTION__, page);
+ if (READ_NAND (nand->IO_ADDR) & 0x01) {
+ printf ("%s: Failed write, page 0x%08x, ", __FUNCTION__,
+ page);
return -1;
}
#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
/* Send command to read back the page */
if (col < nand->eccsize)
- NanD_Command(nand, NAND_CMD_READ0);
+ NanD_Command (nand, NAND_CMD_READ0);
else
- NanD_Command(nand, NAND_CMD_READ1);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ NanD_Command (nand, NAND_CMD_READ1);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
/* Loop through and verify the data */
- for (i = col; i < last; i++) {
- if (nand->data_buf[i] != readb (nand->IO_ADDR)) {
- printf ("%s: Failed write verify, page 0x%08x ", __FUNCTION__, page);
- return -1;
+ if (nand->bus16) {
+ for (i = col; i < last; i = +2) {
+ if ((nand->data_buf[i] +
+ (nand->data_buf[i + 1] << 8)) != READ_NAND (nand->IO_ADDR)) {
+ printf ("%s: Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
+ return -1;
+ }
+ }
+ } else {
+ for (i = col; i < last; i++) {
+ if (nand->data_buf[i] != READ_NAND (nand->IO_ADDR)) {
+ printf ("%s: Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
+ return -1;
+ }
}
}
* We also want to check that the ECC bytes wrote
* correctly for the same reasons stated above.
*/
- NanD_Command(nand, NAND_CMD_READOOB);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
- for (i = 0; i < nand->oobsize; i++)
- nand->data_buf[i] = readb (nand->IO_ADDR);
+ NanD_Command (nand, NAND_CMD_READOOB);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+ if (nand->bus16) {
+ for (i = 0; i < nand->oobsize; i += 2) {
+ u16 val;
+
+ val = READ_NAND (nand->IO_ADDR);
+ nand->data_buf[i] = val & 0xff;
+ nand->data_buf[i + 1] = val >> 8;
+ }
+ } else {
+ for (i = 0; i < nand->oobsize; i++) {
+ nand->data_buf[i] = READ_NAND (nand->IO_ADDR);
+ }
+ }
for (i = 0; i < ecc_bytes; i++) {
if ((nand->data_buf[(oob_config.ecc_pos[i])] != ecc_code[i]) && ecc_code[i]) {
printf ("%s: Failed ECC write "
- "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
+ "verify, page 0x%08x, "
+ "%6i bytes were succesful\n",
+ __FUNCTION__, page, i);
return -1;
}
}
-#endif
-#endif
+#endif /* CONFIG_MTD_NAND_ECC */
+#endif /* CONFIG_MTD_NAND_VERIFY_WRITE */
return 0;
}
*retlen = 0;
/* Select the NAND device */
- NAND_ENABLE_CE(nand); /* set pin low */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_OFF();
+#endif
+
+ NAND_ENABLE_CE(nand); /* set pin low */
/* Check the WP bit */
NanD_Command(nand, NAND_CMD_STATUS);
nand->cache_page = -1;
/* Write data into buffer */
- if ((col + len) >= nand->oobblock)
- for (i = col, cnt = 0; i < nand->oobblock; i++, cnt++)
+ if ((col + len) >= nand->oobblock) {
+ for (i = col, cnt = 0; i < nand->oobblock; i++, cnt++) {
nand->data_buf[i] = buf[(*retlen + cnt)];
- else
- for (i = col, cnt = 0; cnt < (len - *retlen); i++, cnt++)
+ }
+ } else {
+ for (i = col, cnt = 0; cnt < (len - *retlen); i++, cnt++) {
nand->data_buf[i] = buf[(*retlen + cnt)];
+ }
+ }
/* We use the same function for write and writev !) */
ret = nand_write_page (nand, page, col, i, ecc_code);
if (ret)
out:
/* De-select the NAND device */
NAND_DISABLE_CE(nand); /* set pin high */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_ON();
+#endif
return ret;
}
NAND_ENABLE_CE(nand); /* set pin low */
NanD_Command(nand, NAND_CMD_READOOB);
- NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
/* treat crossing 8-byte OOB data for 2M x 8bit devices */
/* Note: datasheet says it should automaticaly wrap to the */
* causing the flash device to go into busy mode, so we need
* to wait until ready 11.4.1 and Toshiba TC58256FT nands */
- ret = NanD_WaitReady(nand);
+ ret = NanD_WaitReady(nand, 1);
NAND_DISABLE_CE(nand); /* set pin high */
return ret;
/* issue the Read2 command to set the pointer to the Spare Data Area. */
NanD_Command(nand, NAND_CMD_READOOB);
- NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
/* update address for 2M x 8bit devices. OOB starts on the second */
/* page to maintain compatibility with nand_read_ecc. */
/* issue the Serial Data In command to initial the Page Program process */
NanD_Command(nand, NAND_CMD_SEQIN);
- NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
/* treat crossing 8-byte OOB data for 2M x 8bit devices */
/* Note: datasheet says it should automaticaly wrap to the */
NanD_Command(nand, NAND_CMD_PAGEPROG);
NanD_Command(nand, NAND_CMD_STATUS);
- /* NanD_WaitReady() is implicit in NanD_Command */
-
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
if (READ_NAND(nandptr) & 1) {
puts ("Error programming oob data\n");
/* There was an error */
NanD_Address(nand, ADDR_COLUMN_PAGE, ofs & (~0x1ff));
}
- for (i = len256; i < len; i++)
- WRITE_NAND(buf[i], nandptr);
+ if (nand->bus16) {
+ for (i = len256; i < len; i += 2) {
+ WRITE_NAND(buf[i] + (buf[i+1] << 8), nandptr);
+ }
+ } else {
+ for (i = len256; i < len; i++)
+ WRITE_NAND(buf[i], nandptr);
+ }
NanD_Command(nand, NAND_CMD_PAGEPROG);
NanD_Command(nand, NAND_CMD_STATUS);
- /* NanD_WaitReady() is implicit in NanD_Command */
-
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
if (READ_NAND(nandptr) & 1) {
puts ("Error programming oob data\n");
/* There was an error */
}
-static int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
{
/* This is defined as a structure so it will work on any system
* using native endian jffs2 (the default).
nandptr = nand->IO_ADDR;
/* Select the NAND device */
- NAND_ENABLE_CE(nand); /* set pin low */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_OFF();
+#endif
+ NAND_ENABLE_CE(nand); /* set pin low */
/* Check the WP bit */
NanD_Command(nand, NAND_CMD_STATUS);
NanD_Command(nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
if (READ_NAND(nandptr) & 1) {
printf ("%s: Error erasing at 0x%lx\n",
__FUNCTION__, (long)ofs);
if (nand->page256) {
p = NAND_JFFS2_OOB8_FSDAPOS;
l = NAND_JFFS2_OOB8_FSDALEN;
- }
- else {
+ } else {
p = NAND_JFFS2_OOB16_FSDAPOS;
l = NAND_JFFS2_OOB16_FSDALEN;
}
- ret = nand_write_oob(nand, ofs + p, l, &n,
+ ret = nand_write_oob(nand, ofs + p, l, (size_t *)&n,
(u_char *)&clean_marker);
/* quit here if write failed */
if (ret)
out:
/* De-select the NAND device */
NAND_DISABLE_CE(nand); /* set pin high */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_ON();
+#endif
return ret;
}
return 0;
}
-void nand_probe(unsigned long physadr)
+unsigned long nand_probe(unsigned long physadr)
{
struct nand_chip *nand = NULL;
int i = 0, ChipID = 1;
for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
- nand = nand_dev_desc + i;
+ nand = &nand_dev_desc[i];
break;
}
}
+ if (!nand)
+ return (0);
memset((char *)nand, 0, sizeof(struct nand_chip));
/* no chips found, clean up and quit */
memset((char *)nand, 0, sizeof(struct nand_chip));
nand->ChipID = NAND_ChipID_UNKNOWN;
- return;
+ return (0);
}
nand->ChipID = ChipID;
nand->data_buf = malloc (nand->oobblock + nand->oobsize);
if (!nand->data_buf) {
puts ("Cannot allocate memory for data structures.\n");
- return;
+ return (0);
}
+
+ return (nand->totlen);
}
#ifdef CONFIG_MTD_NAND_ECC
* Pre-calculated 256-way 1 byte column parity
*/
static const u_char nand_ecc_precalc_table[] = {
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};
if ((d1 | d2 | d3) == 0) {
/* No errors */
return 0;
- }
- else {
+ } else {
a = (d1 ^ (d1 >> 1)) & 0x55;
b = (d2 ^ (d2 >> 1)) & 0x55;
c = (d3 ^ (d3 >> 1)) & 0x54;
/* Should never happen */
return -1;
}
+
#endif
+
+#ifdef CONFIG_JFFS2_NAND
+
+int read_jffs2_nand(size_t start, size_t len,
+ size_t * retlen, u_char * buf, int nanddev)
+{
+ return nand_rw(nand_dev_desc + nanddev, NANDRW_READ | NANDRW_JFFS2,
+ start, len, retlen, buf);
+}
+
+#endif /* CONFIG_JFFS2_NAND */
+
+
#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */