/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
-
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
* MA 02111-1307 USA
*/
-/**************************************************************************
- *
+/*
* Support for persistent environment data
*
- * The "environment" is stored as a list of '\0' terminated
- * "name=value" strings. The end of the list is marked by a double
- * '\0'. New entries are always added at the end. Deleting an entry
- * shifts the remaining entries to the front. Replacing an entry is a
- * combination of deleting the old value and adding the new one.
- *
- * The environment is preceeded by a 32 bit CRC over the data part.
+ * The "environment" is stored on external storage as a list of '\0'
+ * terminated "name=value" strings. The end of the list is marked by
+ * a double '\0'. The environment is preceeded by a 32 bit CRC over
+ * the data part and, in case of redundant environment, a byte of
+ * flags.
*
- **************************************************************************
+ * This linearized representation will also be used before
+ * relocation, i. e. as long as we don't have a full C runtime
+ * environment. After that, we use a hash table.
*/
#include <common.h>
#include <command.h>
#include <environment.h>
-#if defined(CONFIG_CMD_EDITENV)
+#include <search.h>
+#include <errno.h>
#include <malloc.h>
-#endif
#include <watchdog.h>
#include <serial.h>
#include <linux/stddef.h>
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \
- !defined(CONFIG_ENV_IS_IN_FLASH) && \
- !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
- !defined(CONFIG_ENV_IS_IN_MG_DISK) && \
- !defined(CONFIG_ENV_IS_IN_NAND) && \
- !defined(CONFIG_ENV_IS_IN_NVRAM) && \
- !defined(CONFIG_ENV_IS_IN_ONENAND) && \
- !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
- !defined(CONFIG_ENV_IS_NOWHERE)
+#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \
+ !defined(CONFIG_ENV_IS_IN_FLASH) && \
+ !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
+ !defined(CONFIG_ENV_IS_IN_MMC) && \
+ !defined(CONFIG_ENV_IS_IN_FAT) && \
+ !defined(CONFIG_ENV_IS_IN_NAND) && \
+ !defined(CONFIG_ENV_IS_IN_NVRAM) && \
+ !defined(CONFIG_ENV_IS_IN_ONENAND) && \
+ !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
+ !defined(CONFIG_ENV_IS_IN_REMOTE) && \
+ !defined(CONFIG_ENV_IS_NOWHERE)
# error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
-SPI_FLASH|MG_DISK|NVRAM|NOWHERE}
+SPI_FLASH|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE
#endif
#define XMK_STR(x) #x
#define MK_STR(x) XMK_STR(x)
-/************************************************************************
-************************************************************************/
+/*
+ * Maximum expected input data size for import command
+ */
+#define MAX_ENV_SIZE (1 << 20) /* 1 MiB */
+
+ulong load_addr = CONFIG_SYS_LOAD_ADDR; /* Default Load Address */
+ulong save_addr; /* Default Save Address */
+ulong save_size; /* Default Save Size (in bytes) */
/*
* Table with supported baudrates (defined in config_xyz.h)
#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
/*
- * This variable is incremented on each do_setenv (), so it can
+ * This variable is incremented on each do_env_set(), so it can
* be used via get_env_id() as an indication, if the environment
* has changed or not. So it is possible to reread an environment
* variable only if the environment was changed ... done so for
*/
static int env_id = 1;
-int get_env_id (void)
+int get_env_id(void)
{
return env_id;
}
-/************************************************************************
- * Command interface: print one or all environment variables
- */
/*
- * state 0: finish printing this string and return (matched!)
- * state 1: no matching to be done; print everything
- * state 2: continue searching for matched name
+ * Command interface: print one or all environment variables
+ *
+ * Returns 0 in case of error, or length of printed string
*/
-static int printenv(char *name, int state)
+static int env_print(char *name)
{
- int i, j;
- char c, buf[17];
-
- i = 0;
- buf[16] = '\0';
-
- while (state && env_get_char(i) != '\0') {
- if (state == 2 && envmatch((uchar *)name, i) >= 0)
- state = 0;
-
- j = 0;
- do {
- buf[j++] = c = env_get_char(i++);
- if (j == sizeof(buf) - 1) {
- if (state <= 1)
- puts(buf);
- j = 0;
- }
- } while (c != '\0');
+ char *res = NULL;
+ size_t len;
+
+ if (name) { /* print a single name */
+ ENTRY e, *ep;
+
+ e.key = name;
+ e.data = NULL;
+ hsearch_r(e, FIND, &ep, &env_htab);
+ if (ep == NULL)
+ return 0;
+ len = printf("%s=%s\n", ep->key, ep->data);
+ return len;
+ }
- if (state <= 1) {
- if (j)
- puts(buf);
- putc('\n');
- }
+ /* print whole list */
+ len = hexport_r(&env_htab, '\n', &res, 0, 0, NULL);
- if (ctrlc())
- return -1;
+ if (len > 0) {
+ puts(res);
+ free(res);
+ return len;
}
- if (state == 0)
- i = 0;
- return i;
+ /* should never happen */
+ return 0;
}
-int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
int rcode = 0;
if (argc == 1) {
/* print all env vars */
- rcode = printenv(NULL, 1);
- if (rcode < 0)
+ rcode = env_print(NULL);
+ if (!rcode)
return 1;
printf("\nEnvironment size: %d/%ld bytes\n",
rcode, (ulong)ENV_SIZE);
/* print selected env vars */
for (i = 1; i < argc; ++i) {
- char *name = argv[i];
- if (printenv(name, 2)) {
- printf("## Error: \"%s\" not defined\n", name);
+ int rc = env_print(argv[i]);
+ if (!rc) {
+ printf("## Error: \"%s\" not defined\n", argv[i]);
++rcode;
}
}
return rcode;
}
-/************************************************************************
+#ifdef CONFIG_CMD_GREPENV
+static int do_env_grep(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ ENTRY *match;
+ unsigned char matched[env_htab.size / 8];
+ int rcode = 1, arg = 1, idx;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ memset(matched, 0, env_htab.size / 8);
+
+ while (arg <= argc) {
+ idx = 0;
+ while ((idx = hstrstr_r(argv[arg], idx, &match, &env_htab))) {
+ if (!(matched[idx / 8] & (1 << (idx & 7)))) {
+ puts(match->key);
+ puts("=");
+ puts(match->data);
+ puts("\n");
+ }
+ matched[idx / 8] |= 1 << (idx & 7);
+ rcode = 0;
+ }
+ arg++;
+ }
+
+ return rcode;
+}
+#endif
+
+/*
* Set a new environment variable,
* or replace or delete an existing one.
- *
- * This function will ONLY work with a in-RAM copy of the environment
*/
-
-int _do_setenv (int flag, int argc, char * const argv[])
+int _do_env_set(int flag, int argc, char * const argv[])
{
- int i, len, oldval;
+ int i, len;
int console = -1;
- uchar *env, *nxt = NULL;
- char *name;
- bd_t *bd = gd->bd;
-
- uchar *env_data = env_get_addr(0);
-
- if (!env_data) /* need copy in RAM */
- return 1;
+ char *name, *value, *s;
+ ENTRY e, *ep;
name = argv[1];
if (strchr(name, '=')) {
- printf ("## Error: illegal character '=' in variable name \"%s\"\n", name);
+ printf("## Error: illegal character '=' in variable name"
+ "\"%s\"\n", name);
return 1;
}
/*
* search if variable with this name already exists
*/
- oldval = -1;
- for (env=env_data; *env; env=nxt+1) {
- for (nxt=env; *nxt; ++nxt)
- ;
- if ((oldval = envmatch((uchar *)name, env-env_data)) >= 0)
- break;
- }
+ e.key = name;
+ e.data = NULL;
+ hsearch_r(e, FIND, &ep, &env_htab);
/* Check for console redirection */
- if (strcmp(name,"stdin") == 0) {
+ if (strcmp(name, "stdin") == 0)
console = stdin;
- } else if (strcmp(name,"stdout") == 0) {
+ else if (strcmp(name, "stdout") == 0)
console = stdout;
- } else if (strcmp(name,"stderr") == 0) {
+ else if (strcmp(name, "stderr") == 0)
console = stderr;
- }
if (console != -1) {
if (argc < 3) { /* Cannot delete it! */
return i;
#else
/* Try assigning specified device */
- if (console_assign (console, argv[2]) < 0)
+ if (console_assign(console, argv[2]) < 0)
return 1;
#ifdef CONFIG_SERIAL_MULTI
- if (serial_assign (argv[2]) < 0)
+ if (serial_assign(argv[2]) < 0)
return 1;
#endif
#endif /* CONFIG_CONSOLE_MUX */
}
/*
- * Delete any existing definition
+ * Some variables like "ethaddr" and "serial#" can be set only
+ * once and cannot be deleted; also, "ver" is readonly.
*/
- if (oldval >= 0) {
+ if (ep) { /* variable exists */
#ifndef CONFIG_ENV_OVERWRITE
-
- /*
- * Ethernet Address and serial# can be set only once,
- * ver is readonly.
- */
- if (
-#ifdef CONFIG_HAS_UID
- /* Allow serial# forced overwrite with 0xdeaf4add flag */
- ((strcmp (name, "serial#") == 0) && (flag != 0xdeaf4add)) ||
-#else
- (strcmp (name, "serial#") == 0) ||
-#endif
- ((strcmp (name, "ethaddr") == 0)
+ if (strcmp(name, "serial#") == 0 ||
+ (strcmp(name, "ethaddr") == 0
#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR)
- && (strcmp ((char *)env_get_addr(oldval),MK_STR(CONFIG_ETHADDR)) != 0)
+ && strcmp(ep->data, MK_STR(CONFIG_ETHADDR)) != 0
#endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */
- ) ) {
- printf ("Can't overwrite \"%s\"\n", name);
+ )) {
+ printf("Can't overwrite \"%s\"\n", name);
return 1;
}
#endif
-
/*
* Switch to new baudrate if new baudrate is supported
*/
- if (strcmp(argv[1],"baudrate") == 0) {
+ if (strcmp(name, "baudrate") == 0) {
int baudrate = simple_strtoul(argv[2], NULL, 10);
int i;
- for (i=0; i<N_BAUDRATES; ++i) {
+ for (i = 0; i < N_BAUDRATES; ++i) {
if (baudrate == baudrate_table[i])
break;
}
if (i == N_BAUDRATES) {
- printf ("## Baudrate %d bps not supported\n",
+ printf("## Baudrate %d bps not supported\n",
baudrate);
return 1;
}
- printf ("## Switch baudrate to %d bps and press ENTER ...\n",
- baudrate);
+ printf("## Switch baudrate to %d bps and"
+ "press ENTER ...\n", baudrate);
udelay(50000);
gd->baudrate = baudrate;
#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
gd->bd->bi_baudrate = baudrate;
#endif
- serial_setbrg ();
+ serial_setbrg();
udelay(50000);
- for (;;) {
- if (getc() == '\r')
- break;
- }
+ while (getc() != '\r')
+ ;
}
-
- if (*++nxt == '\0') {
- if (env > env_data) {
- env--;
- } else {
- *env = '\0';
- }
- } else {
- for (;;) {
- *env = *nxt++;
- if ((*env == '\0') && (*nxt == '\0'))
- break;
- ++env;
- }
- }
- *++env = '\0';
}
/* Delete only ? */
- if ((argc < 3) || argv[2] == NULL) {
- env_crc_update ();
- return 0;
+ if (argc < 3 || argv[2] == NULL) {
+ int rc = hdelete_r(name, &env_htab);
+ return !rc;
}
/*
- * Append new definition at the end
+ * Insert / replace new value
*/
- for (env=env_data; *env || *(env+1); ++env)
- ;
- if (env > env_data)
- ++env;
- /*
- * Overflow when:
- * "name" + "=" + "val" +"\0\0" > ENV_SIZE - (env-env_data)
- */
- len = strlen(name) + 2;
- /* add '=' for first arg, ' ' for all others */
- for (i=2; i<argc; ++i) {
+ for (i = 2, len = 0; i < argc; ++i)
len += strlen(argv[i]) + 1;
- }
- if (len > (&env_data[ENV_SIZE]-env)) {
- printf ("## Error: environment overflow, \"%s\" deleted\n", name);
+
+ value = malloc(len);
+ if (value == NULL) {
+ printf("## Can't malloc %d bytes\n", len);
return 1;
}
- while ((*env = *name++) != '\0')
- env++;
- for (i=2; i<argc; ++i) {
- char *val = argv[i];
+ for (i = 2, s = value; i < argc; ++i) {
+ char *v = argv[i];
- *env = (i==2) ? '=' : ' ';
- while ((*++env = *val++) != '\0')
+ while ((*s++ = *v++) != '\0')
;
+ *(s - 1) = ' ';
+ }
+ if (s != value)
+ *--s = '\0';
+
+ e.key = name;
+ e.data = value;
+ hsearch_r(e, ENTER, &ep, &env_htab);
+ free(value);
+ if (!ep) {
+ printf("## Error inserting \"%s\" variable, errno=%d\n",
+ name, errno);
+ return 1;
}
-
- /* end is marked with double '\0' */
- *++env = '\0';
-
- /* Update CRC */
- env_crc_update ();
/*
* Some variables should be updated when the corresponding
- * entry in the enviornment is changed
+ * entry in the environment is changed
*/
-
- if (strcmp(argv[1],"ethaddr") == 0)
- return 0;
-
- if (strcmp(argv[1],"ipaddr") == 0) {
- char *s = argv[2]; /* always use only one arg */
- char *e;
- unsigned long addr;
- bd->bi_ip_addr = 0;
- for (addr=0, i=0; i<4; ++i) {
- ulong val = s ? simple_strtoul(s, &e, 10) : 0;
- addr <<= 8;
- addr |= (val & 0xFF);
- if (s) s = (*e) ? e+1 : e;
- }
- bd->bi_ip_addr = htonl(addr);
- return 0;
- }
- if (strcmp(argv[1],"loadaddr") == 0) {
+ if (strcmp(argv[1], "loadaddr") == 0) {
load_addr = simple_strtoul(argv[2], NULL, 16);
return 0;
}
#if defined(CONFIG_CMD_NET)
- if (strcmp(argv[1],"bootfile") == 0) {
- copy_filename (BootFile, argv[2], sizeof(BootFile));
+ else if (strcmp(argv[1], "bootfile") == 0) {
+ copy_filename(BootFile, argv[2], sizeof(BootFile));
return 0;
}
#endif
return 0;
}
-int setenv (char *varname, char *varvalue)
+int setenv(const char *varname, const char *varvalue)
{
- char * const argv[4] = { "setenv", varname, varvalue, NULL };
- if ((varvalue == NULL) || (varvalue[0] == '\0'))
- return _do_setenv (0, 2, argv);
+ const char * const argv[4] = { "setenv", varname, varvalue, NULL };
+
+ if (varvalue == NULL || varvalue[0] == '\0')
+ return _do_env_set(0, 2, (char * const *)argv);
else
- return _do_setenv (0, 3, argv);
+ return _do_env_set(0, 3, (char * const *)argv);
}
-#ifdef CONFIG_HAS_UID
-void forceenv (char *varname, char *varvalue)
+/**
+ * Set an environment variable to an integer value
+ *
+ * @param varname Environmet variable to set
+ * @param value Value to set it to
+ * @return 0 if ok, 1 on error
+ */
+int setenv_ulong(const char *varname, ulong value)
{
- char * const argv[4] = { "forceenv", varname, varvalue, NULL };
- _do_setenv (0xdeaf4add, 3, argv);
+ /* TODO: this should be unsigned */
+ char *str = simple_itoa(value);
+
+ return setenv(varname, str);
+}
+
+/**
+ * Set an environment variable to an address in hex
+ *
+ * @param varname Environmet variable to set
+ * @param addr Value to set it to
+ * @return 0 if ok, 1 on error
+ */
+int setenv_addr(const char *varname, const void *addr)
+{
+ char str[17];
+
+ sprintf(str, "%lx", (uintptr_t)addr);
+ return setenv(varname, str);
}
-#endif
-int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
- return cmd_usage(cmdtp);
+ return CMD_RET_USAGE;
- return _do_setenv (flag, argc, argv);
+ return _do_env_set(flag, argc, argv);
}
-/************************************************************************
+/*
* Prompt for environment variable
*/
-
#if defined(CONFIG_CMD_ASKENV)
-int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- extern char console_buffer[CONFIG_SYS_CBSIZE];
char message[CONFIG_SYS_CBSIZE];
int size = CONFIG_SYS_CBSIZE - 1;
- int len;
+ int i, len, pos;
char *local_args[4];
local_args[0] = argv[0];
local_args[2] = NULL;
local_args[3] = NULL;
- if (argc < 2)
- return cmd_usage(cmdtp);
-
/* Check the syntax */
switch (argc) {
case 1:
- return cmd_usage(cmdtp);
+ return CMD_RET_USAGE;
- case 2: /* askenv envname */
- sprintf (message, "Please enter '%s':", argv[1]);
+ case 2: /* env_ask envname */
+ sprintf(message, "Please enter '%s':", argv[1]);
break;
- case 3: /* askenv envname size */
- sprintf (message, "Please enter '%s':", argv[1]);
- size = simple_strtoul (argv[2], NULL, 10);
+ case 3: /* env_ask envname size */
+ sprintf(message, "Please enter '%s':", argv[1]);
+ size = simple_strtoul(argv[2], NULL, 10);
break;
- default: /* askenv envname message1 ... messagen size */
- {
- int i;
- int pos = 0;
-
- for (i = 2; i < argc - 1; i++) {
- if (pos) {
+ default: /* env_ask envname message1 ... messagen size */
+ for (i = 2, pos = 0; i < argc - 1; i++) {
+ if (pos)
message[pos++] = ' ';
- }
- strcpy (message+pos, argv[i]);
+
+ strcpy(message + pos, argv[i]);
pos += strlen(argv[i]);
}
+
message[pos] = '\0';
- size = simple_strtoul (argv[argc - 1], NULL, 10);
- }
+ size = simple_strtoul(argv[argc - 1], NULL, 10);
break;
}
return 1;
/* prompt for input */
- len = readline (message);
+ len = readline(message);
if (size < len)
console_buffer[size] = '\0';
}
/* Continue calling setenv code */
- return _do_setenv (flag, len, local_args);
+ return _do_env_set(flag, len, local_args);
}
#endif
-/************************************************************************
+/*
* Interactively edit an environment variable
*/
#if defined(CONFIG_CMD_EDITENV)
-int do_editenv(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char buffer[CONFIG_SYS_CBSIZE];
char *init_val;
- int len;
if (argc < 2)
- return cmd_usage(cmdtp);
+ return CMD_RET_USAGE;
/* Set read buffer to initial value or empty sting */
init_val = getenv(argv[1]);
if (init_val)
- len = sprintf(buffer, "%s", init_val);
+ sprintf(buffer, "%s", init_val);
else
buffer[0] = '\0';
- readline_into_buffer("edit: ", buffer);
+ readline_into_buffer("edit: ", buffer, 0);
return setenv(argv[1], buffer);
}
#endif /* CONFIG_CMD_EDITENV */
-/************************************************************************
+/*
* Look up variable from environment,
* return address of storage for that variable,
* or NULL if not found
*/
-
-char *getenv (char *name)
+char *getenv(const char *name)
{
- int i, nxt;
+ if (gd->flags & GD_FLG_ENV_READY) { /* after import into hashtable */
+ ENTRY e, *ep;
- WATCHDOG_RESET();
+ WATCHDOG_RESET();
- for (i=0; env_get_char(i) != '\0'; i=nxt+1) {
- int val;
+ e.key = name;
+ e.data = NULL;
+ hsearch_r(e, FIND, &ep, &env_htab);
- for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
- if (nxt >= CONFIG_ENV_SIZE) {
- return (NULL);
- }
- }
- if ((val=envmatch((uchar *)name, i)) < 0)
- continue;
- return ((char *)env_get_addr(val));
+ return ep ? ep->data : NULL;
}
- return (NULL);
+ /* restricted capabilities before import */
+ if (getenv_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0)
+ return (char *)(gd->env_buf);
+
+ return NULL;
}
-int getenv_f(char *name, char *buf, unsigned len)
+/*
+ * Look up variable from environment for restricted C runtime env.
+ */
+int getenv_f(const char *name, char *buf, unsigned len)
{
int i, nxt;
- for (i=0; env_get_char(i) != '\0'; i=nxt+1) {
+ for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) {
int val, n;
- for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
- if (nxt >= CONFIG_ENV_SIZE) {
- return (-1);
- }
+ for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) {
+ if (nxt >= CONFIG_ENV_SIZE)
+ return -1;
}
- if ((val=envmatch((uchar *)name, i)) < 0)
+
+ val = envmatch((uchar *)name, i);
+ if (val < 0)
continue;
/* found; copy out */
- for (n=0; n<len; ++n, ++buf) {
- if ((*buf = env_get_char(val++)) == '\0')
+ for (n = 0; n < len; ++n, ++buf) {
+ *buf = env_get_char(val++);
+ if (*buf == '\0')
return n;
}
if (n)
*--buf = '\0';
- printf("env_buf too small [%d]\n", len);
+ printf("env_buf [%d bytes] too small for value of \"%s\"\n",
+ len, name);
return n;
}
- return (-1);
-}
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+ return -1;
+}
-int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+/**
+ * Decode the integer value of an environment variable and return it.
+ *
+ * @param name Name of environemnt variable
+ * @param base Number base to use (normally 10, or 16 for hex)
+ * @param default_val Default value to return if the variable is not
+ * found
+ * @return the decoded value, or default_val if not found
+ */
+ulong getenv_ulong(const char *name, int base, ulong default_val)
{
- extern char * env_name_spec;
+ /*
+ * We can use getenv() here, even before relocation, since the
+ * environment variable value is an integer and thus short.
+ */
+ const char *str = getenv(name);
- printf ("Saving Environment to %s...\n", env_name_spec);
+ return str ? simple_strtoul(str, NULL, base) : default_val;
+}
+
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ printf("Saving Environment to %s...\n", env_name_spec);
- return (saveenv() ? 1 : 0);
+ return saveenv() ? 1 : 0;
}
U_BOOT_CMD(
- saveenv, 1, 0, do_saveenv,
+ saveenv, 1, 0, do_env_save,
"save environment variables to persistent storage",
""
);
-
#endif
-/************************************************************************
+/*
* Match a name / name=value pair
*
* s1 is either a simple 'name', or a 'name=value' pair.
* i2 is the environment index for a 'name2=value2' pair.
- * If the names match, return the index for the value2, else NULL.
+ * If the names match, return the index for the value2, else -1.
*/
-
-int envmatch (uchar *s1, int i2)
+int envmatch(uchar *s1, int i2)
{
-
while (*s1 == env_get_char(i2++))
if (*s1++ == '=')
- return(i2);
+ return i2;
+
if (*s1 == '\0' && env_get_char(i2-1) == '=')
- return(i2);
- return(-1);
+ return i2;
+
+ return -1;
}
+static int do_env_default(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ if (argc != 2 || strcmp(argv[1], "-f") != 0)
+ return CMD_RET_USAGE;
-/**************************************************/
+ set_default_env("## Resetting to default environment\n");
+ return 0;
+}
+static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ printf("Not implemented yet\n");
+ return 0;
+}
+
+#ifdef CONFIG_CMD_EXPORTENV
+/*
+ * env export [-t | -b | -c] [-s size] addr [var ...]
+ * -t: export as text format; if size is given, data will be
+ * padded with '\0' bytes; if not, one terminating '\0'
+ * will be added (which is included in the "filesize"
+ * setting so you can for exmple copy this to flash and
+ * keep the termination).
+ * -b: export as binary format (name=value pairs separated by
+ * '\0', list end marked by double "\0\0")
+ * -c: export as checksum protected environment format as
+ * used for example by "saveenv" command
+ * -s size:
+ * size of output buffer
+ * addr: memory address where environment gets stored
+ * var... List of variable names that get included into the
+ * export. Without arguments, the whole environment gets
+ * exported.
+ *
+ * With "-c" and size is NOT given, then the export command will
+ * format the data as currently used for the persistent storage,
+ * i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
+ * prepend a valid CRC32 checksum and, in case of resundant
+ * environment, a "current" redundancy flag. If size is given, this
+ * value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
+ * checksum and redundancy flag will be inserted.
+ *
+ * With "-b" and "-t", always only the real data (including a
+ * terminating '\0' byte) will be written; here the optional size
+ * argument will be used to make sure not to overflow the user
+ * provided buffer; the command will abort if the size is not
+ * sufficient. Any remainign space will be '\0' padded.
+ *
+ * On successful return, the variable "filesize" will be set.
+ * Note that filesize includes the trailing/terminating '\0' byte(s).
+ *
+ * Usage szenario: create a text snapshot/backup of the current settings:
+ *
+ * => env export -t 100000
+ * => era ${backup_addr} +${filesize}
+ * => cp.b 100000 ${backup_addr} ${filesize}
+ *
+ * Re-import this snapshot, deleting all other settings:
+ *
+ * => env import -d -t ${backup_addr}
+ */
+static int do_env_export(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char buf[32];
+ char *addr, *cmd, *res;
+ size_t size = 0;
+ ssize_t len;
+ env_t *envp;
+ char sep = '\n';
+ int chk = 0;
+ int fmt = 0;
+
+ cmd = *argv;
+
+ while (--argc > 0 && **++argv == '-') {
+ char *arg = *argv;
+ while (*++arg) {
+ switch (*arg) {
+ case 'b': /* raw binary format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\0';
+ break;
+ case 'c': /* external checksum format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\0';
+ chk = 1;
+ break;
+ case 's': /* size given */
+ if (--argc <= 0)
+ return cmd_usage(cmdtp);
+ size = simple_strtoul(*++argv, NULL, 16);
+ goto NXTARG;
+ case 't': /* text format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\n';
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+ }
+NXTARG: ;
+ }
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+
+ addr = (char *)simple_strtoul(argv[0], NULL, 16);
+
+ if (size)
+ memset(addr, '\0', size);
+
+ argc--;
+ argv++;
+
+ if (sep) { /* export as text file */
+ len = hexport_r(&env_htab, sep, &addr, size, argc, argv);
+ if (len < 0) {
+ error("Cannot export environment: errno = %d\n", errno);
+ return 1;
+ }
+ sprintf(buf, "%zX", (size_t)len);
+ setenv("filesize", buf);
+
+ return 0;
+ }
+
+ envp = (env_t *)addr;
+
+ if (chk) /* export as checksum protected block */
+ res = (char *)envp->data;
+ else /* export as raw binary data */
+ res = addr;
+
+ len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, argc, argv);
+ if (len < 0) {
+ error("Cannot export environment: errno = %d\n", errno);
+ return 1;
+ }
+
+ if (chk) {
+ envp->crc = crc32(0, envp->data, ENV_SIZE);
+#ifdef CONFIG_ENV_ADDR_REDUND
+ envp->flags = ACTIVE_FLAG;
+#endif
+ }
+ sprintf(buf, "%zX", (size_t)(len + offsetof(env_t, data)));
+ setenv("filesize", buf);
+
+ return 0;
+
+sep_err:
+ printf("## %s: only one of \"-b\", \"-c\" or \"-t\" allowed\n", cmd);
+ return 1;
+}
+#endif
+
+#ifdef CONFIG_CMD_IMPORTENV
+/*
+ * env import [-d] [-t | -b | -c] addr [size]
+ * -d: delete existing environment before importing;
+ * otherwise overwrite / append to existion definitions
+ * -t: assume text format; either "size" must be given or the
+ * text data must be '\0' terminated
+ * -b: assume binary format ('\0' separated, "\0\0" terminated)
+ * -c: assume checksum protected environment format
+ * addr: memory address to read from
+ * size: length of input data; if missing, proper '\0'
+ * termination is mandatory
+ */
+static int do_env_import(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char *cmd, *addr;
+ char sep = '\n';
+ int chk = 0;
+ int fmt = 0;
+ int del = 0;
+ size_t size;
+
+ cmd = *argv;
+
+ while (--argc > 0 && **++argv == '-') {
+ char *arg = *argv;
+ while (*++arg) {
+ switch (*arg) {
+ case 'b': /* raw binary format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\0';
+ break;
+ case 'c': /* external checksum format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\0';
+ chk = 1;
+ break;
+ case 't': /* text format */
+ if (fmt++)
+ goto sep_err;
+ sep = '\n';
+ break;
+ case 'd':
+ del = 1;
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+ }
+ }
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+
+ if (!fmt)
+ printf("## Warning: defaulting to text format\n");
+
+ addr = (char *)simple_strtoul(argv[0], NULL, 16);
+
+ if (argc == 2) {
+ size = simple_strtoul(argv[1], NULL, 16);
+ } else {
+ char *s = addr;
+
+ size = 0;
+
+ while (size < MAX_ENV_SIZE) {
+ if ((*s == sep) && (*(s+1) == '\0'))
+ break;
+ ++s;
+ ++size;
+ }
+ if (size == MAX_ENV_SIZE) {
+ printf("## Warning: Input data exceeds %d bytes"
+ " - truncated\n", MAX_ENV_SIZE);
+ }
+ size += 2;
+ printf("## Info: input data size = %zu = 0x%zX\n", size, size);
+ }
+
+ if (chk) {
+ uint32_t crc;
+ env_t *ep = (env_t *)addr;
+
+ size -= offsetof(env_t, data);
+ memcpy(&crc, &ep->crc, sizeof(crc));
+
+ if (crc32(0, ep->data, size) != crc) {
+ puts("## Error: bad CRC, import failed\n");
+ return 1;
+ }
+ addr = (char *)ep->data;
+ }
+
+ if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR) == 0) {
+ error("Environment import failed: errno = %d\n", errno);
+ return 1;
+ }
+ gd->flags |= GD_FLG_ENV_READY;
+
+ return 0;
+
+sep_err:
+ printf("## %s: only one of \"-b\", \"-c\" or \"-t\" allowed\n",
+ cmd);
+ return 1;
+}
+#endif
+
+/*
+ * New command line interface: "env" command with subcommands
+ */
+static cmd_tbl_t cmd_env_sub[] = {
+#if defined(CONFIG_CMD_ASKENV)
+ U_BOOT_CMD_MKENT(ask, CONFIG_SYS_MAXARGS, 1, do_env_ask, "", ""),
+#endif
+ U_BOOT_CMD_MKENT(default, 1, 0, do_env_default, "", ""),
+ U_BOOT_CMD_MKENT(delete, 2, 0, do_env_delete, "", ""),
#if defined(CONFIG_CMD_EDITENV)
+ U_BOOT_CMD_MKENT(edit, 2, 0, do_env_edit, "", ""),
+#endif
+#if defined(CONFIG_CMD_EXPORTENV)
+ U_BOOT_CMD_MKENT(export, 4, 0, do_env_export, "", ""),
+#endif
+#if defined(CONFIG_CMD_GREPENV)
+ U_BOOT_CMD_MKENT(grep, CONFIG_SYS_MAXARGS, 1, do_env_grep, "", ""),
+#endif
+#if defined(CONFIG_CMD_IMPORTENV)
+ U_BOOT_CMD_MKENT(import, 5, 0, do_env_import, "", ""),
+#endif
+ U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_env_print, "", ""),
+#if defined(CONFIG_CMD_RUN)
+ U_BOOT_CMD_MKENT(run, CONFIG_SYS_MAXARGS, 1, do_run, "", ""),
+#endif
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+ U_BOOT_CMD_MKENT(save, 1, 0, do_env_save, "", ""),
+#endif
+ U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""),
+};
+
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+void env_reloc(void)
+{
+ fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
+}
+#endif
+
+static int do_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ cmd_tbl_t *cp;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* drop initial "env" arg */
+ argc--;
+ argv++;
+
+ cp = find_cmd_tbl(argv[0], cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
+
+ if (cp)
+ return cp->cmd(cmdtp, flag, argc, argv);
+
+ return CMD_RET_USAGE;
+}
+
U_BOOT_CMD(
- editenv, 2, 0, do_editenv,
+ env, CONFIG_SYS_MAXARGS, 1, do_env,
+ "environment handling commands",
+#if defined(CONFIG_CMD_ASKENV)
+ "ask name [message] [size] - ask for environment variable\nenv "
+#endif
+ "default -f - reset default environment\n"
+#if defined(CONFIG_CMD_EDITENV)
+ "env edit name - edit environment variable\n"
+#endif
+ "env export [-t | -b | -c] [-s size] addr [var ...] - export environment\n"
+#if defined(CONFIG_CMD_GREPENV)
+ "env grep string [...] - search environment\n"
+#endif
+ "env import [-d] [-t | -b | -c] addr [size] - import environment\n"
+ "env print [name ...] - print environment\n"
+#if defined(CONFIG_CMD_RUN)
+ "env run var [...] - run commands in an environment variable\n"
+#endif
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+ "env save - save environment\n"
+#endif
+ "env set [-f] name [arg ...]\n"
+);
+
+/*
+ * Old command line interface, kept for compatibility
+ */
+
+#if defined(CONFIG_CMD_EDITENV)
+U_BOOT_CMD_COMPLETE(
+ editenv, 2, 0, do_env_edit,
"edit environment variable",
"name\n"
- " - edit environment variable 'name'"
+ " - edit environment variable 'name'",
+ var_complete
);
#endif
-U_BOOT_CMD(
- printenv, CONFIG_SYS_MAXARGS, 1, do_printenv,
+U_BOOT_CMD_COMPLETE(
+ printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
"print environment variables",
"\n - print values of all environment variables\n"
"printenv name ...\n"
- " - print value of environment variable 'name'"
+ " - print value of environment variable 'name'",
+ var_complete
);
-U_BOOT_CMD(
- setenv, CONFIG_SYS_MAXARGS, 0, do_setenv,
+#ifdef CONFIG_CMD_GREPENV
+U_BOOT_CMD_COMPLETE(
+ grepenv, CONFIG_SYS_MAXARGS, 0, do_env_grep,
+ "search environment variables",
+ "string ...\n"
+ " - list environment name=value pairs matching 'string'",
+ var_complete
+);
+#endif
+
+U_BOOT_CMD_COMPLETE(
+ setenv, CONFIG_SYS_MAXARGS, 0, do_env_set,
"set environment variables",
"name value ...\n"
" - set environment variable 'name' to 'value ...'\n"
"setenv name\n"
- " - delete environment variable 'name'"
+ " - delete environment variable 'name'",
+ var_complete
);
#if defined(CONFIG_CMD_ASKENV)
U_BOOT_CMD(
- askenv, CONFIG_SYS_MAXARGS, 1, do_askenv,
+ askenv, CONFIG_SYS_MAXARGS, 1, do_env_ask,
"get environment variables from stdin",
"name [message] [size]\n"
" - get environment variable 'name' from stdin (max 'size' chars)\n"
#endif
#if defined(CONFIG_CMD_RUN)
-int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-U_BOOT_CMD(
+U_BOOT_CMD_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
"var [...]\n"
- " - run the commands in the environment variable(s) 'var'"
+ " - run the commands in the environment variable(s) 'var'",
+ var_complete
);
#endif