#include <common.h>
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
#include <asm/io.h>
#include <ppc4xx.h>
-static u8 hwctl = 0;
+/*
+ * We need to store the info, which chip-select (CS) is used for the
+ * chip number. For example on Sequoia NAND chip #0 uses
+ * CS #3.
+ */
+static int ndfc_cs[NDFC_MAX_BANKS];
-static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- hwctl |= 0x1;
- break;
-
- case NAND_CTL_CLRCLE:
- hwctl &= ~0x1;
- break;
-
- case NAND_CTL_SETALE:
- hwctl |= 0x2;
- break;
-
- case NAND_CTL_CLRALE:
- hwctl &= ~0x2;
- break;
- }
-}
+ struct nand_chip *this = mtd->priv;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ if (cmd == NAND_CMD_NONE)
+ return;
- if (hwctl & 0x1)
- out_8((u8 *)(base + NDFC_CMD), byte);
- else if (hwctl & 0x2)
- out_8((u8 *)(base + NDFC_ALE), byte);
+ if (ctrl & NAND_CLE)
+ out_8((u8 *)(base + NDFC_CMD), cmd & 0xFF);
else
- out_8((u8 *)(base + NDFC_DATA), byte);
-}
-
-static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
- return (in_8((u8 *)(base + NDFC_DATA)));
+ out_8((u8 *)(base + NDFC_ALE), cmd & 0xFF);
}
static int ndfc_dev_ready(struct mtd_info *mtdinfo)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
- while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY))
- ;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
- return 1;
+ return (in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY);
}
static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
u32 ccr;
ccr = in_be32((u32 *)(base + NDFC_CCR));
const u_char *dat, u_char *ecc_code)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
u32 ecc;
u8 *p = (u8 *)&ecc;
static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (;len > 0; len -= 4)
static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
}
#endif /* #ifndef CONFIG_NAND_SPL */
+#ifndef CONFIG_SYS_NAND_BCR
+#define CONFIG_SYS_NAND_BCR 0x80002222
+#endif
+
void board_nand_select_device(struct nand_chip *nand, int chip)
{
/*
* Don't use "chip" to address the NAND device,
* generate the cs from the address where it is encoded.
*/
- int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
- ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+ int cs = ndfc_cs[chip];
/* Set NandFlash Core Configuration Register */
/* 1 col x 2 rows */
out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
+ out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CONFIG_SYS_NAND_BCR);
+}
+
+static void ndfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ /*
+ * Nothing to do here!
+ */
}
int board_nand_init(struct nand_chip *nand)
{
int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
- ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+ static int chip = 0;
- nand->hwcontrol = ndfc_hwcontrol;
- nand->read_byte = ndfc_read_byte;
- nand->read_buf = ndfc_read_buf;
- nand->write_byte = ndfc_write_byte;
- nand->dev_ready = ndfc_dev_ready;
+ /*
+ * Save chip-select for this chip #
+ */
+ ndfc_cs[chip] = cs;
- nand->eccmode = NAND_ECC_HW3_256;
- nand->enable_hwecc = ndfc_enable_hwecc;
- nand->calculate_ecc = ndfc_calculate_ecc;
- nand->correct_data = nand_correct_data;
+ /*
+ * Select required NAND chip in NDFC
+ */
+ board_nand_select_device(nand, chip);
+
+ nand->IO_ADDR_R = (void __iomem *)(base + NDFC_DATA);
+ nand->IO_ADDR_W = (void __iomem *)(base + NDFC_DATA);
+ nand->cmd_ctrl = ndfc_hwcontrol;
+ nand->chip_delay = 50;
+ nand->read_buf = ndfc_read_buf;
+ nand->dev_ready = ndfc_dev_ready;
+ nand->ecc.correct = nand_correct_data;
+ nand->ecc.hwctl = ndfc_enable_hwecc;
+ nand->ecc.calculate = ndfc_calculate_ecc;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 256;
+ nand->ecc.bytes = 3;
+ nand->select_chip = ndfc_select_chip;
#ifndef CONFIG_NAND_SPL
nand->write_buf = ndfc_write_buf;
*/
mtebc(EBC0_CFG, 0xb8400000);
- mtebc(pb0cr, CFG_EBC_PB0CR);
- mtebc(pb0ap, CFG_EBC_PB0AP);
+ mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
+ mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
#endif
- /*
- * Select required NAND chip in NDFC
- */
- board_nand_select_device(nand, cs);
- out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
+ chip++;
return 0;
}
projects / karo-tx-uboot.git / blobdiff