vision2: Remove unused SOBJS

[karo-tx-uboot.git] / doc / README.mpc832xemds

diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds
index 4cfc0fb752a47380d0bf4964c3fc692bd7f6219d..4142aa9c8d5702aa9a906b5f2da7e11b589b774a 100644 (file)
--- a/doc/README.mpc832xemds
+++ b/doc/README.mpc832xemds
@@ -15,7 +15,7 @@ Freescale MPC832XEMDS Board
                "On"  == 0
 
        SW3 is switch 18 as silk-screened onto the board.
-       SW4[8] is the bit labled 8 on Switch 4.
+       SW4[8] is the bit labeled 8 on Switch 4.
        SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
        SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
        SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
@@ -83,8 +83,8 @@ Freescale MPC832XEMDS Board
 
        include/configs/MPC832XEPB.h
 
-    CONFIG_MPC83XX     MPC83XX family for MPC8349, MPC8360 and MPC832X
-    CONFIG_MPC832X     MPC832X specific
+    CONFIG_MPC83xx     MPC83xx family for MPC8349, MPC8360 and MPC832x
+    CONFIG_MPC832x     MPC832x specific
     CONFIG_MPC832XEMDS MPC832XEMDS board specific
 
 4. Compilation
@@ -97,7 +97,7 @@ Freescale MPC832XEMDS Board
                make MPC832XEMDS_config
                make
 
-       MPC832X support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
+       MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
 
                1)Make sure the DIP SW support PCI mode as described in Section 1.1.
 
@@ -126,4 +126,3 @@ Maybe 3ffff will work too, that corresponds to the erased sectors.
 
 6. Notes
        1) The console baudrate for MPC832XEMDS is 115200bps.
-