$ make uniphier_pro4_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
+PH1-Pro4 Ace board:
+ $ make uniphier_pro4_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-ace
+
+PH1-Pro4 Sanji board:
+ $ make uniphier_pro4_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-sanji
+
PH1-Pro5 4KBOX Board:
$ make uniphier_pxs2_ld6b_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro5-4kbox
Burn U-Boot images to NAND
--------------------------
-Write two files to the NAND device as follows:
+Write the following to the NAND device:
+
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
-directory, and then run the following command at the U-Boot command line:
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
+and then run the following command at the U-Boot command line:
=> run nandupdate
Burn U-Boot images to eMMC
--------------------------
-Write two files to the Boot partition 1 of the eMMC device as follows:
+Write the following to the Boot partition 1 of the eMMC device:
+
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
-directory, and then run the following command at the U-Boot command line:
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
+and then run the following command at the U-Boot command line:
=> run emmcupdate