cmd: pmic: add missing parameter 'value' for 'write' subcommand to help message

[karo-tx-uboot.git] / doc / README.uniphier

diff --git a/doc/README.uniphier b/doc/README.uniphier
index 6c3b0924b27b98af6136bf04ccc46a9d24535001..49045a02188aa214bf1bcd555747e5bc28f92733 100644 (file)
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -44,6 +44,14 @@ PH1-Pro4 reference board:
     $ make uniphier_pro4_defconfig
     $ make CROSS_COMPILE=arm-linux-gnueabi-
 
+PH1-Pro4 Ace board:
+    $ make uniphier_pro4_defconfig
+    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-ace
+
+PH1-Pro4 Sanji board:
+    $ make uniphier_pro4_defconfig
+    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-sanji
+
 PH1-Pro5 4KBOX Board:
     $ make uniphier_pxs2_ld6b_defconfig
     $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro5-4kbox
@@ -67,13 +75,18 @@ to use your favorite compiler.
 Burn U-Boot images to NAND
 --------------------------
 
-Write two files to the NAND device as follows:
+Write the following to the NAND device:
+
  - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img         at the offset address 0x00010000
+ - u-boot.bin         at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
 
 If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
-directory, and then run the following command at the U-Boot command line:
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
+and then run the following command at the U-Boot command line:
 
   => run nandupdate
 
@@ -81,13 +94,18 @@ directory, and then run the following command at the U-Boot command line:
 Burn U-Boot images to eMMC
 --------------------------
 
-Write two files to the Boot partition 1 of the eMMC device as follows:
+Write the following to the Boot partition 1 of the eMMC device:
+
  - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img         at the offset address 0x00010000
+ - u-boot.bin         at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
 
 If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
-directory, and then run the following command at the U-Boot command line:
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
+and then run the following command at the U-Boot command line:
 
   => run emmcupdate