on other x86 boards since coreboot deals with most of the low-level details.
U-Boot also supports booting directly from x86 reset vector without coreboot,
-aka raw support or bare support. Currently Link and Intel Crown Bay board
-support running U-Boot 'bare metal'.
+aka raw support or bare support. Currently Link, Intel Crown Bay, Intel
+Minnowboard Max and Intel Galileo support running U-Boot 'bare metal'.
-As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux
-kernel as part of a FIT image. It also supports a compressed zImage.
+As for loading an OS, U-Boot supports directly booting a 32-bit or 64-bit
+Linux kernel as part of a FIT image. It also supports a compressed zImage.
Build Instructions
------------------
to point to a new board. You can also change the Cache-As-RAM (CAR) related
settings here if the default values do not fit your new board.
-Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
+Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
little bit tricky, as generally it requires several binary blobs which are not
shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
not turned on by default in the U-Boot source tree. Firstly, you need turn it
$ make crownbay_defconfig
$ make all
+Intel Minnowboard Max instructions:
+
+This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
+Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at
+the time of writing). Put it in the board directory:
+board/intel/minnowmax/fsp.bin
+
+Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
+directory: board/intel/minnowmax/vga.bin
+
+You still need two more binary blobs. These come from the sample SPI image
+provided in the FSP (SPI.bin at the time of writing).
+
+Use ifdtool in the U-Boot tools directory to extract the images from that
+file, for example:
+
+ $ ./tools/ifdtool -x BayleyBay/SPI.bin
+ $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
+ $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Now you can build U-Boot and obtain u-boot.rom
+
+$ make minnowmax_defconfig
+$ make all
+
+Intel Galileo instructions:
+
+Only one binary blob is needed for Remote Management Unit (RMU) within Intel
+Quark SoC. Not like FSP, U-Boot does not call into the binary. The binary is
+needed by the Quark SoC itself.
+
+You can get the binary blob from Quark Board Support Package from Intel website:
+
+* ./QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
+
+Rename the file and put it to the board directory by:
+
+ $ cp RMU.bin board/intel/galileo/rmu.bin
+
+Now you can build U-Boot and obtain u-boot.rom
+
+$ make galileo_defconfig
+$ make all
+
Test with coreboot
------------------
For testing U-Boot as the coreboot payload, there are things that need be paid
If you want to use ELF as the coreboot payload, change U-Boot configuration to
use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE.
+To enable video you must enable these options in coreboot:
+
+ - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5))
+ - Keep VESA framebuffer
+
+At present it seems that for Minnowboard Max, coreboot does not pass through
+the video information correctly (it always says the resolution is 0x0). This
+works correctly for link though.
+
+
CPU Microcode
-------------
Modern CPUs usually require a special bit stream called microcode [5] to be
Development Flow
----------------
-
These notes are for those who want to port U-Boot to a new x86 platform.
Since x86 CPUs boot from SPI flash, a SPI flash emulator is a good investment.