*
* RETURN: Status
*
- * DESCRIPTION: Updates GPE register enable masks based on the GPE type
+ * DESCRIPTION: Updates GPE register enable masks based upon whether there are
+ * references (either wake or run) to this GPE
*
******************************************************************************/
acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
- u8 register_bit;
+ u32 register_bit;
ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
return_ACPI_STATUS(AE_NOT_EXIST);
}
- register_bit = (u8)
- (1 <<
- (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+ register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+ gpe_register_info);
+
+ /* Clear the wake/run bits up front */
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit);
ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- if (gpe_event_info->runtime_count)
+ /* Set the mask bits only if there are references to this GPE */
+
+ if (gpe_event_info->runtime_count) {
ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
+ }
- if (gpe_event_info->wakeup_count)
+ if (gpe_event_info->wakeup_count) {
ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
+ }
return_ACPI_STATUS(AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_enable_gpe
- *
- * PARAMETERS: gpe_event_info - GPE to enable
- *
- * RETURN: Status
- *
- * DESCRIPTION: Enable a GPE based on the GPE type
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
- /* Make sure HW enable masks are updated */
-
- status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
- if (ACPI_FAILURE(status))
- return_ACPI_STATUS(status);
-
- /* Clear the GPE (of stale events), then enable it */
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status))
- return_ACPI_STATUS(status);
-
- /* Enable the requested GPE */
- status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
- return_ACPI_STATUS(status);
-}
/*******************************************************************************
*
- * FUNCTION: acpi_ev_disable_gpe
+ * FUNCTION: acpi_ev_low_get_gpe_info
*
- * PARAMETERS: gpe_event_info - GPE to disable
+ * PARAMETERS: gpe_number - Raw GPE number
+ * gpe_block - A GPE info block
*
- * RETURN: Status
+ * RETURN: A GPE event_info struct. NULL if not a valid GPE (The gpe_number
+ * is not within the specified GPE block)
*
- * DESCRIPTION: Disable a GPE based on the GPE type
+ * DESCRIPTION: Returns the event_info struct associated with this GPE. This is
+ * the low-level implementation of ev_get_gpe_event_info.
*
******************************************************************************/
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
+ struct acpi_gpe_block_info
+ *gpe_block)
{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
- /* Make sure HW enable masks are updated */
-
- status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
- if (ACPI_FAILURE(status))
- return_ACPI_STATUS(status);
+ u32 gpe_index;
/*
- * Even if we don't know the GPE type, make sure that we always
- * disable it. low_disable_gpe will just clear the enable bit for this
- * GPE and write it. It will not write out the current GPE enable mask,
- * since this may inadvertently enable GPEs too early, if a rogue GPE has
- * come in during ACPICA initialization - possibly as a result of AML or
- * other code that has enabled the GPE.
+ * Validate that the gpe_number is within the specified gpe_block.
+ * (Two steps)
*/
- status = acpi_hw_low_disable_gpe(gpe_event_info);
- return_ACPI_STATUS(status);
+ if (!gpe_block || (gpe_number < gpe_block->block_base_number)) {
+ return (NULL);
+ }
+
+ gpe_index = gpe_number - gpe_block->block_base_number;
+ if (gpe_index >= gpe_block->gpe_count) {
+ return (NULL);
+ }
+
+ return (&gpe_block->event_info[gpe_index]);
}
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_get_gpe_event_info
u32 gpe_number)
{
union acpi_operand_object *obj_desc;
- struct acpi_gpe_block_info *gpe_block;
+ struct acpi_gpe_event_info *gpe_info;
u32 i;
ACPI_FUNCTION_ENTRY();
- /* A NULL gpe_block means use the FADT-defined GPE block(s) */
+ /* A NULL gpe_device means use the FADT-defined GPE block(s) */
if (!gpe_device) {
/* Examine GPE Block 0 and 1 (These blocks are permanent) */
for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
- gpe_block = acpi_gbl_gpe_fadt_blocks[i];
- if (gpe_block) {
- if ((gpe_number >= gpe_block->block_base_number)
- && (gpe_number <
- gpe_block->block_base_number +
- (gpe_block->register_count * 8))) {
- return (&gpe_block->
- event_info[gpe_number -
- gpe_block->
- block_base_number]);
- }
+ gpe_info = acpi_ev_low_get_gpe_info(gpe_number,
+ acpi_gbl_gpe_fadt_blocks
+ [i]);
+ if (gpe_info) {
+ return (gpe_info);
}
}
return (NULL);
}
- gpe_block = obj_desc->device.gpe_block;
-
- if ((gpe_number >= gpe_block->block_base_number) &&
- (gpe_number <
- gpe_block->block_base_number + (gpe_block->register_count * 8))) {
- return (&gpe_block->
- event_info[gpe_number - gpe_block->block_base_number]);
- }
-
- return (NULL);
+ return (acpi_ev_low_get_gpe_info
+ (gpe_number, obj_desc->device.gpe_block));
}
/*******************************************************************************
return_VOID;
}
- /* Set the GPE flags for return to enabled state */
-
- (void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
/*
* Take a snapshot of the GPE info for this level - we copy the info to
* prevent a race condition with remove_handler/remove_block.
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[%2X]",
+ "Unable to clear GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[%2X]",
+ "Unable to clear GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
* Disable the GPE, so it doesn't keep firing before the method has a
* chance to run (it runs asynchronously with interrupts enabled).
*/
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[%2X]",
+ "Unable to disable GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to queue handler for GPE[%2X] - event disabled",
+ "Unable to queue handler for GPE[0x%2X] - event disabled",
gpe_number));
}
break;
default:
- /* No handler or method to run! */
-
+ /*
+ * No handler or method to run!
+ * 03/2010: This case should no longer be possible. We will not allow
+ * a GPE to be enabled if it has no handler or method.
+ */
ACPI_ERROR((AE_INFO,
- "No handler or method for GPE[%2X], disabling event",
+ "No handler or method for GPE[0x%2X], disabling event",
gpe_number));
/*
- * Disable the GPE. The GPE will remain disabled until the ACPICA
- * Core Subsystem is restarted, or a handler is installed.
+ * Disable the GPE. The GPE will remain disabled a handler
+ * is installed or ACPICA is restarted.
*/
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[%2X]",
+ "Unable to disable GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
projects / karo-tx-linux.git / blobdiff