*/
+#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
int bus,
int device, int pin)
{
- struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
-
if (!acpi_prt.count)
return NULL;
*
*/
spin_lock(&acpi_prt_lock);
- list_for_each(node, &acpi_prt.entries) {
- entry = list_entry(node, struct acpi_prt_entry, node);
+ list_for_each_entry(entry, &acpi_prt.entries, node) {
if ((segment == entry->id.segment)
&& (bus == entry->id.bus)
&& (device == entry->id.device)
return NULL;
}
+/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
+static struct dmi_system_id medion_md9580[] = {
+ {
+ .ident = "Medion MD9580-F laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
+static struct dmi_system_id dell_optiplex[] = {
+ {
+ .ident = "Dell Optiplex GX1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
+static struct dmi_system_id hp_t5710[] = {
+ {
+ .ident = "HP t5710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
+ DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
+ },
+ },
+ { }
+};
+
+struct prt_quirk {
+ struct dmi_system_id *system;
+ unsigned int segment;
+ unsigned int bus;
+ unsigned int device;
+ unsigned char pin;
+ char *source; /* according to BIOS */
+ char *actual_source;
+};
+
+/*
+ * These systems have incorrect _PRT entries. The BIOS claims the PCI
+ * interrupt at the listed segment/bus/device/pin is connected to the first
+ * link device, but it is actually connected to the second.
+ */
+static struct prt_quirk prt_quirks[] = {
+ { medion_md9580, 0, 0, 9, 'A',
+ "\\_SB_.PCI0.ISA.LNKA",
+ "\\_SB_.PCI0.ISA.LNKB"},
+ { dell_optiplex, 0, 0, 0xd, 'A',
+ "\\_SB_.LNKB",
+ "\\_SB_.LNKA"},
+ { hp_t5710, 0, 0, 1, 'A',
+ "\\_SB_.PCI0.LNK1",
+ "\\_SB_.PCI0.LNK3"},
+};
+
+static void
+do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt)
+{
+ int i;
+ struct prt_quirk *quirk;
+
+ for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
+ quirk = &prt_quirks[i];
+
+ /* All current quirks involve link devices, not GSIs */
+ if (!prt->source)
+ continue;
+
+ if (dmi_check_system(quirk->system) &&
+ entry->id.segment == quirk->segment &&
+ entry->id.bus == quirk->bus &&
+ entry->id.device == quirk->device &&
+ entry->pin + 'A' == quirk->pin &&
+ !strcmp(prt->source, quirk->source) &&
+ strlen(prt->source) >= strlen(quirk->actual_source)) {
+ printk(KERN_WARNING PREFIX "firmware reports "
+ "%04x:%02x:%02x[%c] connected to %s; "
+ "changing to %s\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, 'A' + entry->pin,
+ prt->source, quirk->actual_source);
+ strcpy(prt->source, quirk->actual_source);
+ }
+ }
+}
+
static int
acpi_pci_irq_add_entry(acpi_handle handle,
int segment, int bus, struct acpi_pci_routing_table *prt)
entry->id.function = prt->address & 0xFFFF;
entry->pin = prt->pin;
+ do_prt_fixups(entry, prt);
+
/*
* Type 1: Dynamic
* ---------------
&polarity, &link,
acpi_pci_allocate_irq);
+ if (irq < 0) {
+ /*
+ * IDE legacy mode controller IRQs are magic. Why do compat
+ * extensions always make such a nasty mess.
+ */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+ (dev->class & 0x05) == 0)
+ return 0;
+ }
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.
return 0;
}
-EXPORT_SYMBOL(acpi_pci_irq_enable);
-
/* FIXME: implement x86/x86_64 version */
void __attribute__ ((weak)) acpi_unregister_gsi(u32 i)
{