#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
static int act;
module_param(act, int, 0644);
-MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.\n");
+MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
+
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
static int tzp;
module_param(tzp, int, 0444);
-MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n");
+MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
static int nocrt;
module_param(nocrt, int, 0);
-MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips.\n");
+MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
static int off;
module_param(off, int, 0);
-MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n");
+MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
static int psv;
module_param(psv, int, 0644);
-MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n");
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
tz->trips.critical.temperature));
}
+ if (tz->trips.critical.flags.valid == 1) {
+ if (crt == -1) {
+ tz->trips.critical.flags.valid = 0;
+ } else if (crt > 0) {
+ unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+
+ /*
+ * Allow override to lower critical threshold
+ */
+ if (crt_k < tz->trips.critical.temperature)
+ tz->trips.critical.temperature = crt_k;
+ }
+ }
+
/* Critical Sleep (optional) */
status =
printk(KERN_EMERG
"Critical temperature reached (%ld C), shutting down.\n",
KELVIN_TO_CELSIUS(tz->temperature));
- acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
+ acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
tz->trips.critical.flags.enabled);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ tz->device->dev.bus_id,
+ ACPI_THERMAL_NOTIFY_CRITICAL,
+ tz->trips.critical.flags.enabled);
orderly_poweroff(true);
} else if (tz->trips.hot.flags.enabled)
tz->trips.hot.flags.enabled = 0;
- acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
+ acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
tz->trips.hot.flags.enabled);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ tz->device->dev.bus_id,
+ ACPI_THERMAL_NOTIFY_HOT,
+ tz->trips.hot.flags.enabled);
/* TBD: Call user-mode "sleep(S4)" function */
entry->owner = THIS_MODULE;
}
- /* 'trip_points' [R/W] */
+ /* 'trip_points' [R] */
entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
- S_IFREG | S_IRUGO | S_IWUSR,
+ S_IRUGO,
acpi_device_dir(device));
if (!entry)
return -ENODEV;
case ACPI_THERMAL_NOTIFY_THRESHOLDS:
acpi_thermal_get_trip_points(tz);
acpi_thermal_check(tz);
- acpi_bus_generate_event(device, event, 0);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ device->dev.bus_id, event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
if (tz->flags.devices)
acpi_thermal_get_devices(tz);
- acpi_bus_generate_event(device, event, 0);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ device->dev.bus_id, event, 0);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
return AE_OK;
}
+#ifdef CONFIG_DMI
+static int thermal_act(struct dmi_system_id *d) {
+
+ if (act == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all active thermal trip points\n", d->ident);
+ act = -1;
+ }
+ return 0;
+}
+static int thermal_nocrt(struct dmi_system_id *d) {
+
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all critical thermal trip point actions.\n", d->ident);
+ nocrt = 1;
+ return 0;
+}
+static int thermal_tzp(struct dmi_system_id *d) {
+
+ if (tzp == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "enabling thermal zone polling\n", d->ident);
+ tzp = 300; /* 300 dS = 30 Seconds */
+ }
+ return 0;
+}
+static int thermal_psv(struct dmi_system_id *d) {
+
+ if (psv == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all passive thermal trip points\n", d->ident);
+ psv = -1;
+ }
+ return 0;
+}
+
+static struct dmi_system_id thermal_dmi_table[] __initdata = {
+ /*
+ * Award BIOS on this AOpen makes thermal control almost worthless.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=8842
+ */
+ {
+ .callback = thermal_act,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_psv,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_tzp,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_nocrt,
+ .ident = "Gigabyte GA-7ZX",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
+ },
+ },
+ {}
+};
+#endif /* CONFIG_DMI */
+
static int __init acpi_thermal_init(void)
{
int result = 0;
+ dmi_check_system(thermal_dmi_table);
+
if (off) {
printk(KERN_NOTICE "ACPI: thermal control disabled\n");
return -ENODEV;