MODULE_VERSION(DRV_VERSION);
+static bool ata_sstatus_online(u32 sstatus)
+{
+ return (sstatus & 0xf) == 0x3;
+}
+
/**
* ata_link_next - link iteration helper
* @link: the previous link, NULL to start
return spd_str[spd - 1];
}
-void ata_dev_disable(struct ata_device *dev)
-{
- if (ata_dev_enabled(dev)) {
- if (ata_msg_drv(dev->link->ap))
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
- ata_acpi_on_disable(dev);
- ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
- ATA_DNXFER_QUIET);
- dev->class++;
- }
-}
-
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
struct ata_link *link = dev->link;
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
- return ata_id_u64(id, 100);
+ return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
else
- return ata_id_u32(id, 60);
+ return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+ id[ATA_ID_CUR_SECTORS];
else
- return id[1] * id[3] * id[6];
+ return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+ id[ATA_ID_SECTORS];
}
}
return rc;
}
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+ struct ata_link *plink = ata_dev_phys_link(dev);
+ u32 target, target_limit;
+
+ if (!sata_scr_valid(plink))
+ return 0;
+
+ if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+ target = 1;
+ else
+ return 0;
+
+ target_limit = (1 << target) - 1;
+
+ /* if already on stricter limit, no need to push further */
+ if (plink->sata_spd_limit <= target_limit)
+ return 0;
+
+ plink->sata_spd_limit = target_limit;
+
+ /* Request another EH round by returning -EAGAIN if link is
+ * going faster than the target speed. Forward progress is
+ * guaranteed by setting sata_spd_limit to target_limit above.
+ */
+ if (plink->sata_spd > target) {
+ ata_dev_printk(dev, KERN_INFO,
+ "applying link speed limit horkage to %s\n",
+ sata_spd_string(target));
+ return -EAGAIN;
+ }
+ return 0;
+}
+
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
return 0;
}
+ rc = ata_do_link_spd_horkage(dev);
+ if (rc)
+ return rc;
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(&ap->link);
+ sata_down_spd_limit(&ap->link, 0);
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
+ * @spd_limit: Additional limit
*
* Adjust SATA spd limit of @link downward. Note that this
* function only adjusts the limit. The change must be applied
* using sata_set_spd().
*
+ * If @spd_limit is non-zero, the speed is limited to equal to or
+ * lower than @spd_limit if such speed is supported. If
+ * @spd_limit is slower than any supported speed, only the lowest
+ * supported speed is allowed.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
{
u32 sstatus, spd, mask;
- int rc, highbit;
+ int rc, bit;
if (!sata_scr_valid(link))
return -EOPNOTSUPP;
* If not, use cached value in link->sata_spd.
*/
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
- if (rc == 0)
+ if (rc == 0 && ata_sstatus_online(sstatus))
spd = (sstatus >> 4) & 0xf;
else
spd = link->sata_spd;
return -EINVAL;
/* unconditionally mask off the highest bit */
- highbit = fls(mask) - 1;
- mask &= ~(1 << highbit);
+ bit = fls(mask) - 1;
+ mask &= ~(1 << bit);
/* Mask off all speeds higher than or equal to the current
* one. Force 1.5Gbps if current SPD is not available.
if (!mask)
return -EINVAL;
+ if (spd_limit) {
+ if (mask & ((1 << spd_limit) - 1))
+ mask &= (1 << spd_limit) - 1;
+ else {
+ bit = ffs(mask) - 1;
+ mask = 1 << bit;
+ }
+ }
+
link->sata_spd_limit = mask;
ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
/* Devices that do not need bridging limits applied */
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+ /* Devices which aren't very happy with higher link speeds */
+ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+
/* End Marker */
{ }
};
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
return -1;
DPRINTK("%d sg elements mapped\n", n_elem);
-
+ qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
/**
* ata_qc_new - Request an available ATA command, for queueing
- * @ap: Port associated with device @dev
- * @dev: Device from whom we request an available command structure
+ * @ap: target port
*
* LOCKING:
* None.
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) == 0x3)
+ ata_sstatus_online(sstatus))
return true;
return false;
}
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) != 0x3)
+ !ata_sstatus_online(sstatus))
return true;
return false;
}
dev->horkage = 0;
spin_unlock_irqrestore(ap->lock, flags);
- memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
- sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+ memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+ ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_pio_queue_task);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);