config VT
bool "Virtual terminal" if EMBEDDED
+ depends on !S390
select INPUT
default y if !VIOCONS
---help---
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
+ depends on HAS_IOMEM
---help---
Say Y here if you have any non-standard serial boards -- boards
which aren't supported using the standard "dumb" serial driver.
config ROCKETPORT
tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
help
This driver supports Comtrol RocketPort and RocketModem PCI boards.
These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
This is upgraded (1.9.1) driver from original Moxa drivers with
changes finally resulting in PCI probing.
- Use at your own risk.
-
This driver can also be built as a module. The module will be called
mxser_new. If you want to do that, say M here.
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && BROKEN_ON_SMP
+ depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && BROKEN_ON_SMP
+ depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
To compile this driver as a module, choose M here: the
module will be called istallion.
-config AU1000_UART
- bool "Enable Au1000 UART Support"
- depends on SERIAL_NONSTANDARD && MIPS
- help
- If you have an Alchemy AU1000 processor (MIPS based) and you want
- to use serial ports, say Y. Otherwise, say N.
-
-config AU1000_SERIAL_CONSOLE
- bool "Enable Au1000 serial console"
- depends on AU1000_UART
- help
- If you have an Alchemy AU1000 processor (MIPS based) and you want
- to use a console on a serial port, say Y. Otherwise, say N.
-
-config SERIAL_DEC
- bool "DECstation serial support"
- depends on MACH_DECSTATION
- default y
- help
- This selects whether you want to be asked about drivers for
- DECstation serial ports.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about DECstation serial ports.
-
-config SERIAL_DEC_CONSOLE
- bool "Support for console on a DECstation serial port"
- depends on SERIAL_DEC
- default y
- help
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
- kernel messages and warnings and which allows logins in single user
- mode). Note that the firmware uses ttyS0 as the serial console on
- the Maxine and ttyS2 on the others.
-
- If unsure, say Y.
-
-config ZS
- bool "Z85C30 Serial Support"
- depends on SERIAL_DEC
- default y
- help
- Documentation on the Zilog 85C350 serial communications controller
- is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
-
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
help
Toshiba's Cell Reference Set Beat Console device driver
+config HVC_XEN
+ bool "Xen Hypervisor Console support"
+ depends on XEN
+ select HVC_DRIVER
+ default y
+ help
+ Xen virtual console device driver
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config DTLK
tristate "Double Talk PC internal speech card support"
+ depends on ISA
help
This driver is for the DoubleTalk PC, a speech synthesizer
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
depends on CPU_VR41XX
config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ tristate "RAW driver (/dev/raw/rawN)"
depends on BLOCK
help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
+ The raw driver permits block devices to be bound to /dev/raw/rawN.
+ Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and will be removed soon.
- Applications should simply open the device (eg /dev/hda1)
+ Applications should preferably open the device (eg /dev/hda1)
with the O_DIRECT flag.
config MAX_RAW_DEVS
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64
+ depends on X86 || IA64 || PPC64 || S390
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
depends on ISA || PCI
default y
+source "drivers/s390/char/Kconfig"
+
endmenu
projects / mv-sheeva.git / blobdiff