xen: use the hvc console infrastructure for Xen console

[mv-sheeva.git] / drivers / char / Kconfig

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index a31c6d2c061fdcc22df065f2eb673bc08ad7f4df..9e8f21410d2d06a3f499c5d22397a45fb5ff0472 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -114,7 +114,7 @@ config COMPUTONE
 
 config ROCKETPORT
        tristate "Comtrol RocketPort support"
-       depends on SERIAL_NONSTANDARD
+       depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
        help
          This driver supports Comtrol RocketPort and RocketModem PCI boards.   
           These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
@@ -157,7 +157,7 @@ config CYZ_INTR
 
 config DIGIEPCA
        tristate "Digiboard Intelligent Async Support"
-       depends on SERIAL_NONSTANDARD
+       depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
        ---help---
          This is a driver for Digi International's Xx, Xeve, and Xem series
          of cards which provide multiple serial ports. You would need
@@ -213,8 +213,6 @@ config MOXA_SMARTIO_NEW
          This is upgraded (1.9.1) driver from original Moxa drivers with
          changes finally resulting in PCI probing.
 
-         Use at your own risk.
-
          This driver can also be built as a module. The module will be called
          mxser_new. If you want to do that, say M here.
 
@@ -354,7 +352,7 @@ config STALDRV
 
 config STALLION
        tristate "Stallion EasyIO or EC8/32 support"
-       depends on STALDRV && BROKEN_ON_SMP
+       depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
        help
          If you have an EasyIO or EasyConnection 8/32 multiport Stallion
          card, then this is for you; say Y.  Make sure to read
@@ -365,7 +363,7 @@ config STALLION
 
 config ISTALLION
        tristate "Stallion EC8/64, ONboard, Brumby support"
-       depends on STALDRV && BROKEN_ON_SMP
+       depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
        help
          If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
          serial multiport card, say Y here. Make sure to read
@@ -374,53 +372,6 @@ config ISTALLION
          To compile this driver as a module, choose M here: the
          module will be called istallion.
 
-config AU1000_UART
-       bool "Enable Au1000 UART Support"
-       depends on SERIAL_NONSTANDARD && MIPS
-       help
-         If you have an Alchemy AU1000 processor (MIPS based) and you want
-         to use serial ports, say Y.  Otherwise, say N.
-
-config AU1000_SERIAL_CONSOLE
-       bool "Enable Au1000 serial console"
-       depends on AU1000_UART
-       help
-         If you have an Alchemy AU1000 processor (MIPS based) and you want
-         to use a console on a serial port, say Y.  Otherwise, say N.
-
-config SERIAL_DEC
-       bool "DECstation serial support"
-       depends on MACH_DECSTATION
-       default y
-       help
-         This selects whether you want to be asked about drivers for
-         DECstation serial ports.
-
-         Note that the answer to this question won't directly affect the
-         kernel: saying N will just cause the configurator to skip all
-         the questions about DECstation serial ports.
-
-config SERIAL_DEC_CONSOLE
-       bool "Support for console on a DECstation serial port"
-       depends on SERIAL_DEC
-       default y
-       help
-         If you say Y here, it will be possible to use a serial port as the
-         system console (the system console is the device which receives all
-         kernel messages and warnings and which allows logins in single user
-         mode).  Note that the firmware uses ttyS0 as the serial console on
-         the Maxine and ttyS2 on the others.
-
-         If unsure, say Y.
-
-config ZS
-       bool "Z85C30 Serial Support"
-       depends on SERIAL_DEC
-       default y
-       help
-         Documentation on the Zilog 85C350 serial communications controller
-         is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
-
 config A2232
        tristate "Commodore A2232 serial support (EXPERIMENTAL)"
        depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
@@ -653,6 +604,14 @@ config HVC_BEAT
        help
          Toshiba's Cell Reference Set Beat Console device driver
 
+config HVC_XEN
+       bool "Xen Hypervisor Console support"
+       depends on XEN
+       select HVC_DRIVER
+       default y
+       help
+         Xen virtual console device driver
+
 config HVCS
        tristate "IBM Hypervisor Virtual Console Server support"
        depends on PPC_PSERIES
@@ -993,15 +952,14 @@ config GPIO_VR41XX
        depends on CPU_VR41XX
 
 config RAW_DRIVER
-       tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+       tristate "RAW driver (/dev/raw/rawN)"
        depends on BLOCK
        help
-         The raw driver permits block devices to be bound to /dev/raw/rawN. 
-         Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. 
+         The raw driver permits block devices to be bound to /dev/raw/rawN.
+         Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
          See the raw(8) manpage for more details.
 
-          The raw driver is deprecated and will be removed soon.
-          Applications should simply open the device (eg /dev/hda1)
+          Applications should preferably open the device (eg /dev/hda1)
           with the O_DIRECT flag.
 
 config MAX_RAW_DEVS