return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
}
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
- struct mxser_port *mp)
+static void mxser_raise_dtr_rts(struct tty_port *port)
{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
+ struct mxser_port *mp = container_of(port, struct mxser_port, port);
unsigned long flags;
- int cd;
- struct tty_port *port = &mp->port;
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- test_bit(TTY_IO_ERROR, &tty->flags)) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * mxser_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&mp->slock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
+ outb(inb(mp->ioaddr + UART_MCR) |
+ UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
spin_unlock_irqrestore(&mp->slock, flags);
- port->blocked_open++;
- while (1) {
- spin_lock_irqsave(&mp->slock, flags);
- outb(inb(mp->ioaddr + UART_MCR) |
- UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
- spin_unlock_irqrestore(&mp->slock, flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- cd = tty_port_carrier_raised(port);
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval)
- return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
}
static int mxser_set_baud(struct tty_struct *tty, long newspd)
/*
* Start up serial port
*/
- spin_lock_irqsave(&info->slock, flags);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count++;
- spin_unlock_irqrestore(&info->slock, flags);
+ spin_unlock_irqrestore(&info->port.lock, flags);
retval = mxser_startup(tty);
if (retval)
return retval;
- retval = mxser_block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(&info->port, tty, filp);
if (retval)
return retval;
static void mxser_close(struct tty_struct *tty, struct file *filp)
{
struct mxser_port *info = tty->driver_data;
+ struct tty_port *port = &info->port;
unsigned long timeout;
- unsigned long flags;
if (tty->index == MXSER_PORTS)
return;
if (!info)
return;
- spin_lock_irqsave(&info->slock, flags);
-
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&info->slock, flags);
- return;
- }
- if ((tty->count == 1) && (info->port.count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->port.count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk(KERN_ERR "mxser_close: bad serial port count; "
- "tty->count is 1, info->port.count is %d\n", info->port.count);
- info->port.count = 1;
- }
- if (--info->port.count < 0) {
- printk(KERN_ERR "mxser_close: bad serial port count for "
- "ttys%d: %d\n", tty->index, info->port.count);
- info->port.count = 0;
- }
- if (info->port.count) {
- spin_unlock_irqrestore(&info->slock, flags);
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
- info->port.flags |= ASYNC_CLOSING;
- spin_unlock_irqrestore(&info->slock, flags);
+
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
+ *
+ * FIXME: Can this go ?
*/
if (info->port.flags & ASYNC_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->port.closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
}
}
mxser_shutdown(tty);
-
mxser_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- tty_port_tty_set(&info->port, NULL);
- if (info->port.blocked_open) {
- if (info->port.close_delay)
- schedule_timeout_interruptible(info->port.close_delay);
- wake_up_interruptible(&info->port.open_wait);
- }
- info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ /* Right now the tty_port set is done outside of the close_end helper
+ as we don't yet have everyone using refcounts */
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
mxser_flush_buffer(tty);
mxser_shutdown(tty);
- info->port.count = 0;
- info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- tty_port_tty_set(&info->port, NULL);
- wake_up_interruptible(&info->port.open_wait);
+ tty_port_hangup(&info->port);
}
/*
struct tty_port_operations mxser_port_ops = {
.carrier_raised = mxser_carrier_raised,
+ .raise_dtr_rts = mxser_raise_dtr_rts,
};
/*