/*
* mxser.c -- MOXA Smartio/Industio family multiport serial driver.
*
- * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw).
+ * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com).
+ * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com>
*
- * This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others.
+ * This code is loosely based on the 1.8 moxa driver which is based on
+ * Linux serial driver, written by Linus Torvalds, Theodore T'so and
+ * others.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Original release 10/26/00
- *
- * 02/06/01 Support MOXA Industio family boards.
- * 02/06/01 Support TIOCGICOUNT.
- * 02/06/01 Fix the problem for connecting to serial mouse.
- * 02/06/01 Fix the problem for H/W flow control.
- * 02/06/01 Fix the compling warning when CONFIG_PCI
- * don't be defined.
- *
* Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
* <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
* - Fixed x86_64 cleanness
* - Fixed sleep with spinlock held in mxser_send_break
*/
-
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include "mxser.h"
-#define MXSER_VERSION "1.8"
+#define MXSER_VERSION "2.0.3" /* 1.11 */
#define MXSERMAJOR 174
#define MXSERCUMAJOR 175
-#define MXSER_EVENT_TXLOW 1
-#define MXSER_EVENT_HANGUP 2
-
#define MXSER_BOARDS 4 /* Max. boards */
-#define MXSER_PORTS 32 /* Max. ports */
#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
-#define MXSER_ISR_PASS_LIMIT 256
+#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
+#define MXSER_ISR_PASS_LIMIT 100
#define MXSER_ERR_IOADDR -1
#define MXSER_ERR_IRQ -2
#define MXSER_ERR_IRQ_CONFLIT -3
#define MXSER_ERR_VECTOR -4
+/*CheckIsMoxaMust return value*/
+#define MOXA_OTHER_UART 0x00
+#define MOXA_MUST_MU150_HWID 0x01
+#define MOXA_MUST_MU860_HWID 0x02
+
#define WAKEUP_CHARS 256
#define UART_MCR_AFE 0x20
#define UART_LSR_SPECIAL 0x1E
+#define PCI_DEVICE_ID_CB108 0x1080
+#define PCI_DEVICE_ID_CB114 0x1142
+#define PCI_DEVICE_ID_CP114UL 0x1143
+#define PCI_DEVICE_ID_CB134I 0x1341
+#define PCI_DEVICE_ID_CP138U 0x1380
+#define PCI_DEVICE_ID_POS104UL 0x1044
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
#define C168_ASIC_ID 1
#define C104_ASIC_ID 2
#define CI134_ASIC_ID 3
#define CI104J_ASIC_ID 5
-enum {
- MXSER_BOARD_C168_ISA = 1,
- MXSER_BOARD_C104_ISA,
- MXSER_BOARD_CI104J,
- MXSER_BOARD_C168_PCI,
- MXSER_BOARD_C104_PCI,
- MXSER_BOARD_C102_ISA,
- MXSER_BOARD_CI132,
- MXSER_BOARD_CI134,
- MXSER_BOARD_CP132,
- MXSER_BOARD_CP114,
- MXSER_BOARD_CT114,
- MXSER_BOARD_CP102,
- MXSER_BOARD_CP104U,
- MXSER_BOARD_CP168U,
- MXSER_BOARD_CP132U,
- MXSER_BOARD_CP134U,
- MXSER_BOARD_CP104JU,
- MXSER_BOARD_RC7000,
- MXSER_BOARD_CP118U,
- MXSER_BOARD_CP102UL,
- MXSER_BOARD_CP102U,
-};
-
-static char *mxser_brdname[] = {
- "C168 series",
- "C104 series",
- "CI-104J series",
- "C168H/PCI series",
- "C104H/PCI series",
- "C102 series",
- "CI-132 series",
- "CI-134 series",
- "CP-132 series",
- "CP-114 series",
- "CT-114 series",
- "CP-102 series",
- "CP-104U series",
- "CP-168U series",
- "CP-132U series",
- "CP-134U series",
- "CP-104JU series",
- "Moxa UC7000 Serial",
- "CP-118U series",
- "CP-102UL series",
- "CP-102U series",
-};
-
-static int mxser_numports[] = {
- 8, /* C168-ISA */
- 4, /* C104-ISA */
- 4, /* CI104J */
- 8, /* C168-PCI */
- 4, /* C104-PCI */
- 2, /* C102-ISA */
- 2, /* CI132 */
- 4, /* CI134 */
- 2, /* CP132 */
- 4, /* CP114 */
- 4, /* CT114 */
- 2, /* CP102 */
- 4, /* CP104U */
- 8, /* CP168U */
- 2, /* CP132U */
- 4, /* CP134U */
- 4, /* CP104JU */
- 8, /* RC7000 */
- 8, /* CP118U */
- 2, /* CP102UL */
- 2, /* CP102U */
-};
-
-#define UART_TYPE_NUM 2
-
-static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = {
- MOXA_MUST_MU150_HWID,
- MOXA_MUST_MU860_HWID
-};
+#define MXSER_HIGHBAUD 1
+#define MXSER_HAS2 2
/* This is only for PCI */
-#define UART_INFO_NUM 3
-struct mxpciuart_info {
+static const struct {
int type;
int tx_fifo;
int rx_fifo;
int rx_trigger;
int rx_low_water;
long max_baud;
-};
-
-static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = {
+} Gpci_uart_info[] = {
{MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
{MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
{MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
};
+#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
+struct mxser_cardinfo {
+ char *name;
+ unsigned int nports;
+ unsigned int flags;
+};
-#ifdef CONFIG_PCI
+static const struct mxser_cardinfo mxser_cards[] = {
+/* 0*/ { "C168 series", 8, },
+ { "C104 series", 4, },
+ { "CI-104J series", 4, },
+ { "C168H/PCI series", 8, },
+ { "C104H/PCI series", 4, },
+/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */
+ { "CI-132 series", 4, MXSER_HAS2 },
+ { "CI-134 series", 4, },
+ { "CP-132 series", 2, },
+ { "CP-114 series", 4, },
+/*10*/ { "CT-114 series", 4, },
+ { "CP-102 series", 2, MXSER_HIGHBAUD },
+ { "CP-104U series", 4, },
+ { "CP-168U series", 8, },
+ { "CP-132U series", 2, },
+/*15*/ { "CP-134U series", 4, },
+ { "CP-104JU series", 4, },
+ { "Moxa UC7000 Serial", 8, }, /* RC7000 */
+ { "CP-118U series", 8, },
+ { "CP-102UL series", 2, },
+/*20*/ { "CP-102U series", 2, },
+ { "CP-118EL series", 8, },
+ { "CP-168EL series", 8, },
+ { "CP-104EL series", 4, },
+ { "CB-108 series", 8, },
+/*25*/ { "CB-114 series", 4, },
+ { "CB-134I series", 4, },
+ { "CP-138U series", 8, },
+ { "POS-104UL series", 4, },
+ { "CP-114UL series", 4, }
+};
+/* driver_data correspond to the lines in the structure above
+ see also ISA probe function before you change something */
static struct pci_device_id mxser_pcibrds[] = {
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL},
- {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U},
- {0}
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
+ { }
};
-
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-
-#endif
-
-typedef struct _moxa_pci_info {
- unsigned short busNum;
- unsigned short devNum;
- struct pci_dev *pdev; /* add by Victor Yu. 06-23-2003 */
-} moxa_pci_info;
-
static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
static int ttymajor = MXSERMAJOR;
-static int calloutmajor = MXSERCUMAJOR;
-static int verbose = 0;
/* Variables for insmod */
MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
module_param_array(ioaddr, int, NULL, 0);
module_param(ttymajor, int, 0);
-module_param(calloutmajor, int, 0);
-module_param(verbose, bool, 0);
MODULE_LICENSE("GPL");
struct mxser_log {
int iftype[32];
};
-struct mxser_hwconf {
- int board_type;
- int ports;
- int irq;
- int vector;
- int vector_mask;
- int uart_type;
- int ioaddr[MXSER_PORTS_PER_BOARD];
- int baud_base[MXSER_PORTS_PER_BOARD];
- moxa_pci_info pciInfo;
- int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */
- int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 09-04-2002 */
- int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 01-05-2004 */
-};
+struct mxser_board;
+
+struct mxser_port {
+ struct tty_port port;
+ struct mxser_board *board;
+
+ unsigned long ioaddr;
+ unsigned long opmode_ioaddr;
+ int max_baud;
-struct mxser_struct {
- int port;
- int base; /* port base address */
- int irq; /* port using irq no. */
- int vector; /* port irq vector */
- int vectormask; /* port vector mask */
int rx_high_water;
int rx_trigger; /* Rx fifo trigger level */
int rx_low_water;
int baud_base; /* max. speed */
- int flags; /* defined in tty.h */
int type; /* UART type */
- struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int xmit_fifo_size;
- int custom_divisor;
+
int x_char; /* xon/xoff character */
- int close_delay;
- unsigned short closing_wait;
int IER; /* Interrupt Enable Register */
int MCR; /* Modem control register */
- unsigned long event;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
+
+ unsigned char stop_rx;
+ unsigned char ldisc_stop_rx;
+
+ int custom_divisor;
+ unsigned char err_shadow;
+
+ struct async_icount icount; /* kernel counters for 4 input interrupts */
+ int timeout;
+
+ int read_status_mask;
+ int ignore_status_mask;
+ int xmit_fifo_size;
int xmit_head;
int xmit_tail;
int xmit_cnt;
- struct work_struct tqueue;
+
struct ktermios normal_termios;
- struct ktermios callout_termios;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- wait_queue_head_t delta_msr_wait;
- struct async_icount icount; /* kernel counters for the 4 input interrupts */
- int timeout;
- int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */
- int MaxCanSetBaudRate; /* add by Victor Yu. 09-04-2002 */
- int opmode_ioaddr; /* add by Victor Yu. 01-05-2004 */
- unsigned char stop_rx;
- unsigned char ldisc_stop_rx;
- long realbaud;
+
struct mxser_mon mon_data;
- unsigned char err_shadow;
+
spinlock_t slock;
+ wait_queue_head_t delta_msr_wait;
+};
+
+struct mxser_board {
+ unsigned int idx;
+ int irq;
+ const struct mxser_cardinfo *info;
+ unsigned long vector;
+ unsigned long vector_mask;
+
+ int chip_flag;
+ int uart_type;
+
+ struct mxser_port ports[MXSER_PORTS_PER_BOARD];
};
struct mxser_mstatus {
/* 0x180, 0x280, 0x200, 0x320 */
};
+static struct mxser_board mxser_boards[MXSER_BOARDS];
static struct tty_driver *mxvar_sdriver;
-static struct mxser_struct mxvar_table[MXSER_PORTS];
-static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
-static struct ktermios *mxvar_termios[MXSER_PORTS + 1];
-static struct ktermios *mxvar_termios_locked[MXSER_PORTS + 1];
static struct mxser_log mxvar_log;
static int mxvar_diagflag;
static unsigned char mxser_msr[MXSER_PORTS + 1];
static struct mxser_mon_ext mon_data_ext;
static int mxser_set_baud_method[MXSER_PORTS + 1];
-static spinlock_t gm_lock;
-/*
- * This is used to figure out the divisor speeds and the timeouts
- */
+static void mxser_enable_must_enchance_mode(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
-static struct mxser_hwconf mxsercfg[MXSER_BOARDS];
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-/*
- * static functions:
- */
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr |= MOXA_MUST_EFR_EFRB_ENABLE;
-static void mxser_getcfg(int board, struct mxser_hwconf *hwconf);
-static int mxser_init(void);
-
-/* static void mxser_poll(unsigned long); */
-static int mxser_get_ISA_conf(int, struct mxser_hwconf *);
-static void mxser_do_softint(struct work_struct *);
-static int mxser_open(struct tty_struct *, struct file *);
-static void mxser_close(struct tty_struct *, struct file *);
-static int mxser_write(struct tty_struct *, const unsigned char *, int);
-static int mxser_write_room(struct tty_struct *);
-static void mxser_flush_buffer(struct tty_struct *);
-static int mxser_chars_in_buffer(struct tty_struct *);
-static void mxser_flush_chars(struct tty_struct *);
-static void mxser_put_char(struct tty_struct *, unsigned char);
-static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong);
-static int mxser_ioctl_special(unsigned int, void __user *);
-static void mxser_throttle(struct tty_struct *);
-static void mxser_unthrottle(struct tty_struct *);
-static void mxser_set_termios(struct tty_struct *, struct ktermios *);
-static void mxser_stop(struct tty_struct *);
-static void mxser_start(struct tty_struct *);
-static void mxser_hangup(struct tty_struct *);
-static void mxser_rs_break(struct tty_struct *, int);
-static irqreturn_t mxser_interrupt(int, void *);
-static void mxser_receive_chars(struct mxser_struct *, int *);
-static void mxser_transmit_chars(struct mxser_struct *);
-static void mxser_check_modem_status(struct mxser_struct *, int);
-static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
-static int mxser_startup(struct mxser_struct *);
-static void mxser_shutdown(struct mxser_struct *);
-static int mxser_change_speed(struct mxser_struct *, struct ktermios *old_termios);
-static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *);
-static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *);
-static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *);
-static void mxser_send_break(struct mxser_struct *, int);
-static int mxser_tiocmget(struct tty_struct *, struct file *);
-static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int);
-static int mxser_set_baud(struct mxser_struct *info, long newspd);
-static void mxser_wait_until_sent(struct tty_struct *tty, int timeout);
-
-static void mxser_startrx(struct tty_struct *tty);
-static void mxser_stoprx(struct tty_struct *tty);
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
-#ifdef CONFIG_PCI
-static int CheckIsMoxaMust(int io)
+static void mxser_disable_must_enchance_mode(unsigned long baseio)
{
- u8 oldmcr, hwid;
- int i;
+ u8 oldlcr;
+ u8 efr;
- outb(0, io + UART_LCR);
- DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
- oldmcr = inb(io + UART_MCR);
- outb(0, io + UART_MCR);
- SET_MOXA_MUST_XON1_VALUE(io, 0x11);
- if ((hwid = inb(io + UART_MCR)) != 0) {
- outb(oldmcr, io + UART_MCR);
- return MOXA_OTHER_UART;
- }
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
- GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
- for (i = 0; i < UART_TYPE_NUM; i++) {
- if (hwid == Gmoxa_uart_id[i])
- return (int)hwid;
- }
- return MOXA_OTHER_UART;
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
}
-#endif
-/* above is modified by Victor Yu. 08-15-2002 */
+static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
+{
+ u8 oldlcr;
+ u8 efr;
-static const struct tty_operations mxser_ops = {
- .open = mxser_open,
- .close = mxser_close,
- .write = mxser_write,
- .put_char = mxser_put_char,
- .flush_chars = mxser_flush_chars,
- .write_room = mxser_write_room,
- .chars_in_buffer = mxser_chars_in_buffer,
- .flush_buffer = mxser_flush_buffer,
- .ioctl = mxser_ioctl,
- .throttle = mxser_throttle,
- .unthrottle = mxser_unthrottle,
- .set_termios = mxser_set_termios,
- .stop = mxser_stop,
- .start = mxser_start,
- .hangup = mxser_hangup,
- .break_ctl = mxser_rs_break,
- .wait_until_sent = mxser_wait_until_sent,
- .tiocmget = mxser_tiocmget,
- .tiocmset = mxser_tiocmset,
-};
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-/*
- * The MOXA Smartio/Industio serial driver boot-time initialization code!
- */
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK0;
-static int __init mxser_module_init(void)
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_XON1_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
{
- int ret;
+ u8 oldlcr;
+ u8 efr;
- if (verbose)
- printk(KERN_DEBUG "Loading module mxser ...\n");
- ret = mxser_init();
- if (verbose)
- printk(KERN_DEBUG "Done.\n");
- return ret;
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK0;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
}
-static void __exit mxser_module_exit(void)
+static void mxser_set_must_fifo_value(struct mxser_port *info)
{
- int i, err;
-
- if (verbose)
- printk(KERN_DEBUG "Unloading module mxser ...\n");
+ u8 oldlcr;
+ u8 efr;
- err = tty_unregister_driver(mxvar_sdriver);
- if (!err)
- put_tty_driver(mxvar_sdriver);
- else
- printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n");
+ oldlcr = inb(info->ioaddr + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
- for (i = 0; i < MXSER_BOARDS; i++) {
- struct pci_dev *pdev;
+ efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK1;
- if (mxsercfg[i].board_type == -1)
- continue;
- else {
- pdev = mxsercfg[i].pciInfo.pdev;
- free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
- if (pdev != NULL) { /* PCI */
- release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
- release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
- pci_dev_put(pdev);
- } else {
- release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
- release_region(mxsercfg[i].vector, 1);
- }
- }
- }
- if (verbose)
- printk(KERN_DEBUG "Done.\n");
+ outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
+ outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
+ outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
+ outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
+ outb(oldlcr, info->ioaddr + UART_LCR);
}
-static void process_txrx_fifo(struct mxser_struct *info)
+static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
{
- int i;
+ u8 oldlcr;
+ u8 efr;
- if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
- info->rx_trigger = 1;
- info->rx_high_water = 1;
- info->rx_low_water = 1;
- info->xmit_fifo_size = 1;
- } else {
- for (i = 0; i < UART_INFO_NUM; i++) {
- if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) {
- info->rx_trigger = Gpci_uart_info[i].rx_trigger;
- info->rx_low_water = Gpci_uart_info[i].rx_low_water;
- info->rx_high_water = Gpci_uart_info[i].rx_high_water;
- info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
- break;
- }
- }
- }
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK2;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
}
-static int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
+static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
{
- struct mxser_struct *info;
- int retval;
- int i, n;
+ u8 oldlcr;
+ u8 efr;
- n = board * MXSER_PORTS_PER_BOARD;
- info = &mxvar_table[n];
- /*if (verbose) */ {
- printk(KERN_DEBUG " ttyMI%d - ttyMI%d ",
- n, n + hwconf->ports - 1);
- printk(" max. baud rate = %d bps.\n",
- hwconf->MaxCanSetBaudRate[0]);
- }
-
- for (i = 0; i < hwconf->ports; i++, n++, info++) {
- info->port = n;
- info->base = hwconf->ioaddr[i];
- info->irq = hwconf->irq;
- info->vector = hwconf->vector;
- info->vectormask = hwconf->vector_mask;
- info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; /* add by Victor Yu. 01-05-2004 */
- info->stop_rx = 0;
- info->ldisc_stop_rx = 0;
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
- info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag;
- /* Enhance mode enabled here */
- if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
- ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base);
- }
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK2;
- info->flags = ASYNC_SHARE_IRQ;
- info->type = hwconf->uart_type;
- info->baud_base = hwconf->baud_base[i];
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
- info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i];
+static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
- process_txrx_fifo(info);
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_MASK;
- info->custom_divisor = hwconf->baud_base[i] * 16;
- info->close_delay = 5 * HZ / 10;
- info->closing_wait = 30 * HZ;
- INIT_WORK(&info->tqueue, mxser_do_softint);
- info->normal_termios = mxvar_sdriver->init_termios;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- init_waitqueue_head(&info->delta_msr_wait);
- memset(&info->mon_data, 0, sizeof(struct mxser_mon));
- info->err_shadow = 0;
- spin_lock_init(&info->slock);
- }
- /*
- * Allocate the IRQ if necessary
- */
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
- /* before set INT ISR, disable all int */
- for (i = 0; i < hwconf->ports; i++) {
- outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0,
- hwconf->ioaddr[i] + UART_IER);
- }
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
- n = board * MXSER_PORTS_PER_BOARD;
- info = &mxvar_table[n];
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+ efr |= MOXA_MUST_EFR_SF_TX1;
- retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info),
- "mxser", info);
- if (retval) {
- printk(KERN_ERR "Board %d: %s",
- board, mxser_brdname[hwconf->board_type - 1]);
- printk(" Request irq failed, IRQ (%d) may conflict with"
- " another device.\n", info->irq);
- return retval;
- }
- return 0;
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
}
-static void mxser_getcfg(int board, struct mxser_hwconf *hwconf)
+static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
{
- mxsercfg[board] = *hwconf;
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
}
-#ifdef CONFIG_PCI
-static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf)
+static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
{
- int i, j;
- /* unsigned int val; */
- unsigned int ioaddress;
- struct pci_dev *pdev = hwconf->pciInfo.pdev;
+ u8 oldlcr;
+ u8 efr;
- /* io address */
- hwconf->board_type = board_type;
- hwconf->ports = mxser_numports[board_type - 1];
- ioaddress = pci_resource_start(pdev, 2);
- request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2),
- "mxser(IO)");
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
- for (i = 0; i < hwconf->ports; i++)
- hwconf->ioaddr[i] = ioaddress + 8 * i;
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+ efr |= MOXA_MUST_EFR_SF_RX1;
- /* vector */
- ioaddress = pci_resource_start(pdev, 3);
- request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3),
- "mxser(vector)");
- hwconf->vector = ioaddress;
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
- /* irq */
- hwconf->irq = hwconf->pciInfo.pdev->irq;
+static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
- hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]);
- hwconf->uart_type = PORT_16550A;
- hwconf->vector_mask = 0;
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
- for (i = 0; i < hwconf->ports; i++) {
- for (j = 0; j < UART_INFO_NUM; j++) {
- if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) {
- hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud;
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
- /* exception....CP-102 */
- if (board_type == MXSER_BOARD_CP102)
- hwconf->MaxCanSetBaudRate[i] = 921600;
- break;
- }
- }
- }
+#ifdef CONFIG_PCI
+static int __devinit CheckIsMoxaMust(unsigned long io)
+{
+ u8 oldmcr, hwid;
+ int i;
- if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) {
- for (i = 0; i < hwconf->ports; i++) {
- if (i < 4)
- hwconf->opmode_ioaddr[i] = ioaddress + 4;
- else
- hwconf->opmode_ioaddr[i] = ioaddress + 0x0c;
- }
- outb(0, ioaddress + 4); /* default set to RS232 mode */
- outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
+ outb(0, io + UART_LCR);
+ mxser_disable_must_enchance_mode(io);
+ oldmcr = inb(io + UART_MCR);
+ outb(0, io + UART_MCR);
+ mxser_set_must_xon1_value(io, 0x11);
+ if ((hwid = inb(io + UART_MCR)) != 0) {
+ outb(oldmcr, io + UART_MCR);
+ return MOXA_OTHER_UART;
}
- for (i = 0; i < hwconf->ports; i++) {
- hwconf->vector_mask |= (1 << i);
- hwconf->baud_base[i] = 921600;
+ mxser_get_must_hardware_id(io, &hwid);
+ for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
+ if (hwid == Gpci_uart_info[i].type)
+ return (int)hwid;
}
- return 0;
+ return MOXA_OTHER_UART;
}
#endif
-static int mxser_init(void)
+static void process_txrx_fifo(struct mxser_port *info)
{
- int i, m, retval, b, n;
- struct pci_dev *pdev = NULL;
- int index;
- unsigned char busnum, devnum;
- struct mxser_hwconf hwconf;
-
- mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
- if (!mxvar_sdriver)
- return -ENOMEM;
- spin_lock_init(&gm_lock);
-
- for (i = 0; i < MXSER_BOARDS; i++) {
- mxsercfg[i].board_type = -1;
- }
+ int i;
- printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
- MXSER_VERSION);
+ if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
+ info->rx_trigger = 1;
+ info->rx_high_water = 1;
+ info->rx_low_water = 1;
+ info->xmit_fifo_size = 1;
+ } else
+ for (i = 0; i < UART_INFO_NUM; i++)
+ if (info->board->chip_flag == Gpci_uart_info[i].type) {
+ info->rx_trigger = Gpci_uart_info[i].rx_trigger;
+ info->rx_low_water = Gpci_uart_info[i].rx_low_water;
+ info->rx_high_water = Gpci_uart_info[i].rx_high_water;
+ info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
+ break;
+ }
+}
- /* Initialize the tty_driver structure */
- memset(mxvar_sdriver, 0, sizeof(struct tty_driver));
- mxvar_sdriver->owner = THIS_MODULE;
- mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
- mxvar_sdriver->name = "ttyMI";
- mxvar_sdriver->major = ttymajor;
- mxvar_sdriver->minor_start = 0;
- mxvar_sdriver->num = MXSER_PORTS + 1;
- mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
- mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
- mxvar_sdriver->init_termios = tty_std_termios;
- mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
- mxvar_sdriver->init_termios.c_ispeed = 9600;
- mxvar_sdriver->init_termios.c_ospeed = 9600;
- mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(mxvar_sdriver, &mxser_ops);
- mxvar_sdriver->ttys = mxvar_tty;
- mxvar_sdriver->termios = mxvar_termios;
- mxvar_sdriver->termios_locked = mxvar_termios_locked;
+static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
+{
+ unsigned char status = 0;
- mxvar_diagflag = 0;
- memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct));
- memset(&mxvar_log, 0, sizeof(struct mxser_log));
+ status = inb(baseaddr + UART_MSR);
- memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1));
- memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext));
- memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1));
- memset(&hwconf, 0, sizeof(struct mxser_hwconf));
+ mxser_msr[port] &= 0x0F;
+ mxser_msr[port] |= status;
+ status = mxser_msr[port];
+ if (mode)
+ mxser_msr[port] = 0;
- m = 0;
- /* Start finding ISA boards here */
- for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
- int cap;
-
- if (!(cap = mxserBoardCAP[b]))
- continue;
-
- retval = mxser_get_ISA_conf(cap, &hwconf);
-
- if (retval != 0)
- printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n",
- mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
-
- if (retval <= 0) {
- if (retval == MXSER_ERR_IRQ)
- printk(KERN_ERR "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk(KERN_ERR "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk(KERN_ERR "Invalid interrupt vector, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk(KERN_ERR "Invalid I/O address, "
- "board not configured\n");
-
- continue;
- }
+ return status;
+}
- hwconf.pciInfo.busNum = 0;
- hwconf.pciInfo.devNum = 0;
- hwconf.pciInfo.pdev = NULL;
+static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct mxser_port *port)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0;
+ unsigned long flags;
- mxser_getcfg(m, &hwconf);
- /*
- * init mxsercfg first,
- * or mxsercfg data is not correct on ISR.
- */
- /* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(m, &hwconf) < 0)
- continue;
-
- m++;
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ test_bit(TTY_IO_ERROR, &tty->flags)) {
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
}
- /* Start finding ISA boards from module arg */
- for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
- int cap;
-
- if (!(cap = ioaddr[b]))
- continue;
-
- retval = mxser_get_ISA_conf(cap, &hwconf);
-
- if (retval != 0)
- printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n",
- mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
-
- if (retval <= 0) {
- if (retval == MXSER_ERR_IRQ)
- printk(KERN_ERR "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk(KERN_ERR "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk(KERN_ERR "Invalid interrupt vector, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk(KERN_ERR "Invalid I/O address, "
- "board not configured\n");
-
- continue;
- }
-
- hwconf.pciInfo.busNum = 0;
- hwconf.pciInfo.devNum = 0;
- hwconf.pciInfo.pdev = NULL;
-
- mxser_getcfg(m, &hwconf);
- /*
- * init mxsercfg first,
- * or mxsercfg data is not correct on ISR.
- */
- /* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(m, &hwconf) < 0)
- continue;
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
- m++;
- }
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, port->port.count is dropped by one, so that
+ * mxser_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&port->port.open_wait, &wait);
- /* start finding PCI board here */
-#ifdef CONFIG_PCI
- n = ARRAY_SIZE(mxser_pcibrds) - 1;
- index = 0;
- b = 0;
- while (b < n) {
- pdev = pci_get_device(mxser_pcibrds[b].vendor,
- mxser_pcibrds[b].device, pdev);
- if (pdev == NULL) {
- b++;
- continue;
+ spin_lock_irqsave(&port->slock, flags);
+ if (!tty_hung_up_p(filp))
+ port->port.count--;
+ spin_unlock_irqrestore(&port->slock, flags);
+ port->port.blocked_open++;
+ while (1) {
+ spin_lock_irqsave(&port->slock, flags);
+ outb(inb(port->ioaddr + UART_MCR) |
+ UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&port->slock, flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+ break;
}
- hwconf.pciInfo.busNum = busnum = pdev->bus->number;
- hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3;
- hwconf.pciInfo.pdev = pdev;
- printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n",
- mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1],
- busnum, devnum >> 3);
- index++;
- if (m >= MXSER_BOARDS)
- printk(KERN_ERR
- "Too many Smartio/Industio family boards find "
- "(maximum %d), board not configured\n",
- MXSER_BOARDS);
- else {
- if (pci_enable_device(pdev)) {
- printk(KERN_ERR "Moxa SmartI/O PCI enable "
- "fail !\n");
- continue;
- }
- retval = mxser_get_PCI_conf(busnum, devnum,
- (int)mxser_pcibrds[b].driver_data,
- &hwconf);
- if (retval < 0) {
- if (retval == MXSER_ERR_IRQ)
- printk(KERN_ERR
- "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk(KERN_ERR
- "Invalid interrupt number, "
- "board not configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk(KERN_ERR
- "Invalid interrupt vector, "
- "board not configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk(KERN_ERR
- "Invalid I/O address, "
- "board not configured\n");
- continue;
- }
- mxser_getcfg(m, &hwconf);
- /* init mxsercfg first,
- * or mxsercfg data is not correct on ISR.
- */
- /* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(m, &hwconf) < 0)
- continue;
- m++;
- /* Keep an extra reference if we succeeded. It will
- be returned at unload time */
- pci_dev_get(pdev);
+ if (!(port->port.flags & ASYNC_CLOSING) &&
+ (do_clocal ||
+ (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
}
+ schedule();
}
-#endif
-
- retval = tty_register_driver(mxvar_sdriver);
- if (retval) {
- printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family"
- " driver !\n");
- put_tty_driver(mxvar_sdriver);
-
- for (i = 0; i < MXSER_BOARDS; i++) {
- if (mxsercfg[i].board_type == -1)
- continue;
- else {
- free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
- /* todo: release io, vector */
- }
- }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->port.open_wait, &wait);
+ if (!tty_hung_up_p(filp))
+ port->port.count++;
+ port->port.blocked_open--;
+ if (retval)
return retval;
- }
-
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
-static void mxser_do_softint(struct work_struct *work)
-{
- struct mxser_struct *info =
- container_of(work, struct mxser_struct, tqueue);
- struct tty_struct *tty;
-
- tty = info->tty;
-
- if (tty) {
- if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event))
- tty_wakeup(tty);
- if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event))
- tty_hangup(tty);
- }
-}
-
-static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info)
+static int mxser_set_baud(struct mxser_port *info, long newspd)
{
- unsigned char status = 0;
+ int quot = 0, baud;
+ unsigned char cval;
- status = inb(baseaddr + UART_MSR);
+ if (!info->port.tty || !info->port.tty->termios)
+ return -1;
- mxser_msr[port] &= 0x0F;
- mxser_msr[port] |= status;
- status = mxser_msr[port];
- if (mode)
- mxser_msr[port] = 0;
+ if (!(info->ioaddr))
+ return -1;
- return status;
-}
+ if (newspd > info->max_baud)
+ return -1;
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int mxser_open(struct tty_struct *tty, struct file *filp)
-{
- struct mxser_struct *info;
- int retval, line;
+ if (newspd == 134) {
+ quot = 2 * info->baud_base / 269;
+ tty_encode_baud_rate(info->port.tty, 134, 134);
+ } else if (newspd) {
+ quot = info->baud_base / newspd;
+ if (quot == 0)
+ quot = 1;
+ baud = info->baud_base/quot;
+ tty_encode_baud_rate(info->port.tty, baud, baud);
+ } else {
+ quot = 0;
+ }
- /* initialize driver_data in case something fails */
- tty->driver_data = NULL;
+ info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
+ info->timeout += HZ / 50; /* Add .02 seconds of slop */
- line = tty->index;
- if (line == MXSER_PORTS)
+ if (quot) {
+ info->MCR |= UART_MCR_DTR;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ } else {
+ info->MCR &= ~UART_MCR_DTR;
+ outb(info->MCR, info->ioaddr + UART_MCR);
return 0;
- if (line < 0 || line > MXSER_PORTS)
- return -ENODEV;
- info = mxvar_table + line;
- if (!info->base)
- return -ENODEV;
+ }
- tty->driver_data = info;
- info->tty = tty;
- /*
- * Start up serial port
- */
- retval = mxser_startup(info);
- if (retval)
- return retval;
+ cval = inb(info->ioaddr + UART_LCR);
- retval = mxser_block_til_ready(tty, filp, info);
- if (retval)
- return retval;
+ outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
- info->count++;
+ outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */
+ outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
+ outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
- if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
- if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
- *tty->termios = info->normal_termios;
- else
- *tty->termios = info->callout_termios;
- mxser_change_speed(info, NULL);
- }
+#ifdef BOTHER
+ if (C_BAUD(info->port.tty) == BOTHER) {
+ quot = info->baud_base % newspd;
+ quot *= 8;
+ if (quot % newspd > newspd / 2) {
+ quot /= newspd;
+ quot++;
+ } else
+ quot /= newspd;
- /*
- status = mxser_get_msr(info->base, 0, info->port);
- mxser_check_modem_status(info, status);
- */
+ mxser_set_must_enum_value(info->ioaddr, quot);
+ } else
+#endif
+ mxser_set_must_enum_value(info->ioaddr, 0);
- /* unmark here for very high baud rate (ex. 921600 bps) used */
- tty->low_latency = 1;
return 0;
}
/*
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
*/
-static void mxser_close(struct tty_struct *tty, struct file *filp)
+static int mxser_change_speed(struct mxser_port *info,
+ struct ktermios *old_termios)
{
- struct mxser_struct *info = tty->driver_data;
-
- unsigned long timeout;
- unsigned long flags;
- struct tty_ldisc *ld;
+ unsigned cflag, cval, fcr;
+ int ret = 0;
+ unsigned char status;
- if (tty->index == MXSER_PORTS)
- return;
- if (!info)
- return;
+ if (!info->port.tty || !info->port.tty->termios)
+ return ret;
+ cflag = info->port.tty->termios->c_cflag;
+ if (!(info->ioaddr))
+ return ret;
- spin_lock_irqsave(&info->slock, flags);
+ if (mxser_set_baud_method[info->port.tty->index] == 0)
+ mxser_set_baud(info, tty_get_baud_rate(info->port.tty));
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&info->slock, flags);
- return;
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ case CS8:
+ cval = 0x03;
+ break;
+ default:
+ cval = 0x00;
+ break; /* too keep GCC shut... */
}
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk(KERN_ERR "mxser_close: bad serial port count; "
- "tty->count is 1, info->count is %d\n", info->count);
- info->count = 1;
+ if (cflag & CSTOPB)
+ cval |= 0x04;
+ if (cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+ if (cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+
+ if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
+ if (info->board->chip_flag) {
+ fcr = UART_FCR_ENABLE_FIFO;
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ mxser_set_must_fifo_value(info);
+ } else
+ fcr = 0;
+ } else {
+ fcr = UART_FCR_ENABLE_FIFO;
+ if (info->board->chip_flag) {
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ mxser_set_must_fifo_value(info);
+ } else {
+ switch (info->rx_trigger) {
+ case 1:
+ fcr |= UART_FCR_TRIGGER_1;
+ break;
+ case 4:
+ fcr |= UART_FCR_TRIGGER_4;
+ break;
+ case 8:
+ fcr |= UART_FCR_TRIGGER_8;
+ break;
+ default:
+ fcr |= UART_FCR_TRIGGER_14;
+ break;
+ }
+ }
}
- if (--info->count < 0) {
- printk(KERN_ERR "mxser_close: bad serial port count for "
- "ttys%d: %d\n", info->port, info->count);
- info->count = 0;
+
+ /* CTS flow control flag and modem status interrupts */
+ info->IER &= ~UART_IER_MSI;
+ info->MCR &= ~UART_MCR_AFE;
+ if (cflag & CRTSCTS) {
+ info->port.flags |= ASYNC_CTS_FLOW;
+ info->IER |= UART_IER_MSI;
+ if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
+ info->MCR |= UART_MCR_AFE;
+ } else {
+ status = inb(info->ioaddr + UART_MSR);
+ if (info->port.tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+ info->port.tty->hw_stopped = 0;
+ if (info->type != PORT_16550A &&
+ !info->board->chip_flag) {
+ outb(info->IER & ~UART_IER_THRI,
+ info->ioaddr +
+ UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr +
+ UART_IER);
+ }
+ tty_wakeup(info->port.tty);
+ }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ info->port.tty->hw_stopped = 1;
+ if ((info->type != PORT_16550A) &&
+ (!info->board->chip_flag)) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->ioaddr +
+ UART_IER);
+ }
+ }
+ }
+ }
+ } else {
+ info->port.flags &= ~ASYNC_CTS_FLOW;
}
- if (info->count) {
- spin_unlock_irqrestore(&info->slock, flags);
- return;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ if (cflag & CLOCAL) {
+ info->port.flags &= ~ASYNC_CHECK_CD;
+ } else {
+ info->port.flags |= ASYNC_CHECK_CD;
+ info->IER |= UART_IER_MSI;
}
- info->flags |= ASYNC_CLOSING;
- spin_unlock_irqrestore(&info->slock, flags);
- /*
- * Save the termios structure, since this port may have
- * separate termios for callout and dialin.
- */
- if (info->flags & ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
+ outb(info->IER, info->ioaddr + UART_IER);
+
/*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
+ * Set up parity check flag
*/
- tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- info->IER &= ~UART_IER_RLSI;
- if (info->IsMoxaMustChipFlag)
- info->IER &= ~MOXA_MUST_RECV_ISR;
-/* by William
- info->read_status_mask &= ~UART_LSR_DR;
-*/
- if (info->flags & ASYNC_INITIALIZED) {
- outb(info->IER, info->base + UART_IER);
+ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (I_INPCK(info->port.tty))
+ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask |= UART_LSR_BI;
+
+ info->ignore_status_mask = 0;
+
+ if (I_IGNBRK(info->port.tty)) {
+ info->ignore_status_mask |= UART_LSR_BI;
+ info->read_status_mask |= UART_LSR_BI;
/*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
*/
- timeout = jiffies + HZ;
- while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) {
- schedule_timeout_interruptible(5);
- if (time_after(jiffies, timeout))
- break;
+ if (I_IGNPAR(info->port.tty)) {
+ info->ignore_status_mask |=
+ UART_LSR_OE |
+ UART_LSR_PE |
+ UART_LSR_FE;
+ info->read_status_mask |=
+ UART_LSR_OE |
+ UART_LSR_PE |
+ UART_LSR_FE;
}
}
- mxser_shutdown(info);
-
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
-
- ld = tty_ldisc_ref(tty);
- if (ld) {
- if (ld->flush_buffer)
- ld->flush_buffer(tty);
- tty_ldisc_deref(ld);
- }
-
- tty->closing = 0;
- info->event = 0;
- info->tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay)
- schedule_timeout_interruptible(info->close_delay);
- wake_up_interruptible(&info->open_wait);
+ if (info->board->chip_flag) {
+ mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty));
+ mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty));
+ if (I_IXON(info->port.tty)) {
+ mxser_enable_must_rx_software_flow_control(
+ info->ioaddr);
+ } else {
+ mxser_disable_must_rx_software_flow_control(
+ info->ioaddr);
+ }
+ if (I_IXOFF(info->port.tty)) {
+ mxser_enable_must_tx_software_flow_control(
+ info->ioaddr);
+ } else {
+ mxser_disable_must_tx_software_flow_control(
+ info->ioaddr);
+ }
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ outb(fcr, info->ioaddr + UART_FCR); /* set fcr */
+ outb(cval, info->ioaddr + UART_LCR);
+
+ return ret;
}
-static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static void mxser_check_modem_status(struct mxser_port *port, int status)
{
- int c, total = 0;
- struct mxser_struct *info = tty->driver_data;
+ /* update input line counters */
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (status & UART_MSR_DCTS)
+ port->icount.cts++;
+ port->mon_data.modem_status = status;
+ wake_up_interruptible(&port->delta_msr_wait);
+
+ if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+ if (status & UART_MSR_DCD)
+ wake_up_interruptible(&port->port.open_wait);
+ }
+
+ if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (port->port.tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+ port->port.tty->hw_stopped = 0;
+
+ if ((port->type != PORT_16550A) &&
+ (!port->board->chip_flag)) {
+ outb(port->IER & ~UART_IER_THRI,
+ port->ioaddr + UART_IER);
+ port->IER |= UART_IER_THRI;
+ outb(port->IER, port->ioaddr +
+ UART_IER);
+ }
+ tty_wakeup(port->port.tty);
+ }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ port->port.tty->hw_stopped = 1;
+ if (port->type != PORT_16550A &&
+ !port->board->chip_flag) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr +
+ UART_IER);
+ }
+ }
+ }
+ }
+}
+
+static int mxser_startup(struct mxser_port *info)
+{
+ unsigned long page;
unsigned long flags;
- if (!info->xmit_buf)
- return 0;
+ page = __get_free_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
- while (1) {
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0)
- break;
+ spin_lock_irqsave(&info->slock, flags);
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
- spin_lock_irqsave(&info->slock, flags);
- info->xmit_head = (info->xmit_head + c) &
- (SERIAL_XMIT_SIZE - 1);
- info->xmit_cnt += c;
+ if (info->port.flags & ASYNC_INITIALIZED) {
+ free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
+ }
- buf += c;
- count -= c;
- total += c;
+ if (!info->ioaddr || !info->type) {
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ free_page(page);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
}
+ if (info->port.xmit_buf)
+ free_page(page);
+ else
+ info->port.xmit_buf = (unsigned char *) page;
- if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) {
- if (!tty->hw_stopped ||
- (info->type == PORT_16550A) ||
- (info->IsMoxaMustChipFlag)) {
- spin_lock_irqsave(&info->slock, flags);
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- spin_unlock_irqrestore(&info->slock, flags);
- }
+ /*
+ * Clear the FIFO buffers and disable them
+ * (they will be reenabled in mxser_change_speed())
+ */
+ if (info->board->chip_flag)
+ outb((UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT |
+ MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
+ else
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+ info->ioaddr + UART_FCR);
+
+ /*
+ * At this point there's no way the LSR could still be 0xFF;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (inb(info->ioaddr + UART_LSR) == 0xff) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ return 0;
+ } else
+ return -ENODEV;
}
- return total;
-}
-static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct mxser_struct *info = tty->driver_data;
- unsigned long flags;
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) inb(info->ioaddr + UART_LSR);
+ (void) inb(info->ioaddr + UART_RX);
+ (void) inb(info->ioaddr + UART_IIR);
+ (void) inb(info->ioaddr + UART_MSR);
- if (!info->xmit_buf)
- return;
+ /*
+ * Now, initialize the UART
+ */
+ outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */
+ info->MCR = UART_MCR_DTR | UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
- if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
- return;
+ /*
+ * Finally, enable interrupts
+ */
+ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- spin_lock_irqsave(&info->slock, flags);
- info->xmit_buf[info->xmit_head++] = ch;
- info->xmit_head &= SERIAL_XMIT_SIZE - 1;
- info->xmit_cnt++;
+ if (info->board->chip_flag)
+ info->IER |= MOXA_MUST_IER_EGDAI;
+ outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) inb(info->ioaddr + UART_LSR);
+ (void) inb(info->ioaddr + UART_RX);
+ (void) inb(info->ioaddr + UART_IIR);
+ (void) inb(info->ioaddr + UART_MSR);
+
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ /*
+ * and set the speed of the serial port
+ */
+ mxser_change_speed(info, NULL);
+ info->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->slock, flags);
- if (!tty->stopped && !(info->IER & UART_IER_THRI)) {
- if (!tty->hw_stopped ||
- (info->type == PORT_16550A) ||
- info->IsMoxaMustChipFlag) {
- spin_lock_irqsave(&info->slock, flags);
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- spin_unlock_irqrestore(&info->slock, flags);
- }
- }
-}
+ return 0;
+}
-static void mxser_flush_chars(struct tty_struct *tty)
+/*
+ * This routine will shutdown a serial port; interrupts maybe disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void mxser_shutdown(struct mxser_port *info)
{
- struct mxser_struct *info = tty->driver_data;
unsigned long flags;
- if (info->xmit_cnt <= 0 ||
- tty->stopped ||
- !info->xmit_buf ||
- (tty->hw_stopped &&
- (info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag)
- ))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
spin_lock_irqsave(&info->slock, flags);
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+ * here so the queue might never be waken up
+ */
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ /*
+ * Free the IRQ, if necessary
+ */
+ if (info->port.xmit_buf) {
+ free_page((unsigned long) info->port.xmit_buf);
+ info->port.xmit_buf = NULL;
+ }
+
+ info->IER = 0;
+ outb(0x00, info->ioaddr + UART_IER);
+
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
+ info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ outb(info->MCR, info->ioaddr + UART_MCR);
+
+ /* clear Rx/Tx FIFO's */
+ if (info->board->chip_flag)
+ outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
+ MOXA_MUST_FCR_GDA_MODE_ENABLE,
+ info->ioaddr + UART_FCR);
+ else
+ outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ info->ioaddr + UART_FCR);
+
+ /* read data port to reset things */
+ (void) inb(info->ioaddr + UART_RX);
+
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+ info->port.flags &= ~ASYNC_INITIALIZED;
+
+ if (info->board->chip_flag)
+ SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
spin_unlock_irqrestore(&info->slock, flags);
}
-static int mxser_write_room(struct tty_struct *tty)
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int mxser_open(struct tty_struct *tty, struct file *filp)
{
- struct mxser_struct *info = tty->driver_data;
- int ret;
+ struct mxser_port *info;
+ unsigned long flags;
+ int retval, line;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
+ line = tty->index;
+ if (line == MXSER_PORTS)
+ return 0;
+ if (line < 0 || line > MXSER_PORTS)
+ return -ENODEV;
+ info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
+ if (!info->ioaddr)
+ return -ENODEV;
-static int mxser_chars_in_buffer(struct tty_struct *tty)
-{
- struct mxser_struct *info = tty->driver_data;
- return info->xmit_cnt;
+ tty->driver_data = info;
+ info->port.tty = tty;
+ /*
+ * Start up serial port
+ */
+ spin_lock_irqsave(&info->slock, flags);
+ info->port.count++;
+ spin_unlock_irqrestore(&info->slock, flags);
+ retval = mxser_startup(info);
+ if (retval)
+ return retval;
+
+ retval = mxser_block_til_ready(tty, filp, info);
+ if (retval)
+ return retval;
+
+ /* unmark here for very high baud rate (ex. 921600 bps) used */
+ tty->low_latency = 1;
+ return 0;
}
static void mxser_flush_buffer(struct tty_struct *tty)
{
- struct mxser_struct *info = tty->driver_data;
+ struct mxser_port *info = tty->driver_data;
char fcr;
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- /* below added by shinhay */
- fcr = inb(info->base + UART_FCR);
+ fcr = inb(info->ioaddr + UART_FCR);
outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->base + UART_FCR);
- outb(fcr, info->base + UART_FCR);
+ info->ioaddr + UART_FCR);
+ outb(fcr, info->ioaddr + UART_FCR);
spin_unlock_irqrestore(&info->slock, flags);
- /* above added by shinhay */
tty_wakeup(tty);
}
-static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+
+/*
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
{
- struct mxser_struct *info = tty->driver_data;
- int retval;
- struct async_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser;
- unsigned long templ;
+ struct mxser_port *info = tty->driver_data;
+
+ unsigned long timeout;
unsigned long flags;
- void __user *argp = (void __user *)arg;
if (tty->index == MXSER_PORTS)
- return mxser_ioctl_special(cmd, argp);
+ return;
+ if (!info)
+ return;
- /* following add by Victor Yu. 01-05-2004 */
- if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
- int opmode, p;
- static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
- int shiftbit;
- unsigned char val, mask;
+ spin_lock_irqsave(&info->slock, flags);
- p = info->port % 4;
- if (cmd == MOXA_SET_OP_MODE) {
- if (get_user(opmode, (int __user *) argp))
- return -EFAULT;
- if (opmode != RS232_MODE &&
- opmode != RS485_2WIRE_MODE &&
- opmode != RS422_MODE &&
- opmode != RS485_4WIRE_MODE)
- return -EFAULT;
- mask = ModeMask[p];
- shiftbit = p * 2;
- val = inb(info->opmode_ioaddr);
- val &= mask;
- val |= (opmode << shiftbit);
- outb(val, info->opmode_ioaddr);
- } else {
- shiftbit = p * 2;
- opmode = inb(info->opmode_ioaddr) >> shiftbit;
- opmode &= OP_MODE_MASK;
- if (copy_to_user(argp, &opmode, sizeof(int)))
- return -EFAULT;
- }
- return 0;
- }
- /* above add by Victor Yu. 01-05-2004 */
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
+ if (tty_hung_up_p(filp)) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ return;
}
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- mxser_send_break(info, HZ / 4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
- return 0;
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
- case TIOCSSOFTCAR:
- if (get_user(templ, (unsigned long __user *) argp))
- return -EFAULT;
- arg = templ;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
- return 0;
- case TIOCGSERIAL:
- return mxser_get_serial_info(info, argp);
- case TIOCSSERIAL:
- return mxser_set_serial_info(info, argp);
- case TIOCSERGETLSR: /* Get line status register */
- return mxser_get_lsr_info(info, argp);
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
- * - mask passed in arg for lines of interest
- * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
- * Caller should use TIOCGICOUNT to see which one it was
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->port.count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
*/
- case TIOCMIWAIT:
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount; /* note the counters on entry */
+ printk(KERN_ERR "mxser_close: bad serial port count; "
+ "tty->count is 1, info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
+ }
+ if (--info->port.count < 0) {
+ printk(KERN_ERR "mxser_close: bad serial port count for "
+ "ttys%d: %d\n", tty->index, info->port.count);
+ info->port.count = 0;
+ }
+ if (info->port.count) {
spin_unlock_irqrestore(&info->slock, flags);
+ return;
+ }
+ info->port.flags |= ASYNC_CLOSING;
+ spin_unlock_irqrestore(&info->slock, flags);
+ /*
+ * Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->port.flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->port.closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+ info->IER &= ~UART_IER_RLSI;
+ if (info->board->chip_flag)
+ info->IER &= ~MOXA_MUST_RECV_ISR;
- wait_event_interruptible(info->delta_msr_wait, ({
- cprev = cnow;
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount; /* atomic copy */
- spin_unlock_irqrestore(&info->slock, flags);
-
- ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
- }));
- break;
+ if (info->port.flags & ASYNC_INITIALIZED) {
+ outb(info->IER, info->ioaddr + UART_IER);
/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
*/
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->slock, flags);
- p_cuser = argp;
- /* modified by casper 1/11/2000 */
- if (put_user(cnow.frame, &p_cuser->frame))
- return -EFAULT;
- if (put_user(cnow.brk, &p_cuser->brk))
- return -EFAULT;
- if (put_user(cnow.overrun, &p_cuser->overrun))
- return -EFAULT;
- if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- if (put_user(cnow.parity, &p_cuser->parity))
- return -EFAULT;
- if (put_user(cnow.rx, &p_cuser->rx))
- return -EFAULT;
- if (put_user(cnow.tx, &p_cuser->tx))
- return -EFAULT;
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;
- case MOXA_HighSpeedOn:
- return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
- case MOXA_SDS_RSTICOUNTER: {
- info->mon_data.rxcnt = 0;
- info->mon_data.txcnt = 0;
- return 0;
- }
-/* (above) added by James. */
- case MOXA_ASPP_SETBAUD:{
- long baud;
- if (get_user(baud, (long __user *)argp))
- return -EFAULT;
- mxser_set_baud(info, baud);
- return 0;
- }
- case MOXA_ASPP_GETBAUD:
- if (copy_to_user(argp, &info->realbaud, sizeof(long)))
- return -EFAULT;
-
- return 0;
-
- case MOXA_ASPP_OQUEUE:{
- int len, lsr;
-
- len = mxser_chars_in_buffer(tty);
-
- lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT;
-
- len += (lsr ? 0 : 1);
-
- if (copy_to_user(argp, &len, sizeof(int)))
- return -EFAULT;
-
- return 0;
+ timeout = jiffies + HZ;
+ while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
+ schedule_timeout_interruptible(5);
+ if (time_after(jiffies, timeout))
+ break;
}
- case MOXA_ASPP_MON: {
- int mcr, status;
-
- /* info->mon_data.ser_param = tty->termios->c_cflag; */
-
- status = mxser_get_msr(info->base, 1, info->port, info);
- mxser_check_modem_status(info, status);
+ }
+ mxser_shutdown(info);
- mcr = inb(info->base + UART_MCR);
- if (mcr & MOXA_MUST_MCR_XON_FLAG)
- info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
- else
- info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
+ mxser_flush_buffer(tty);
+ tty_ldisc_flush(tty);
- if (mcr & MOXA_MUST_MCR_TX_XON)
- info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
- else
- info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
+ tty->closing = 0;
+ info->port.tty = NULL;
+ if (info->port.blocked_open) {
+ if (info->port.close_delay)
+ schedule_timeout_interruptible(info->port.close_delay);
+ wake_up_interruptible(&info->port.open_wait);
+ }
- if (info->tty->hw_stopped)
- info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
- else
- info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+}
- if (copy_to_user(argp, &info->mon_data,
- sizeof(struct mxser_mon)))
- return -EFAULT;
+static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ int c, total = 0;
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
- return 0;
- }
+ if (!info->port.xmit_buf)
+ return 0;
- case MOXA_ASPP_LSTATUS: {
- if (copy_to_user(argp, &info->err_shadow,
- sizeof(unsigned char)))
- return -EFAULT;
+ while (1) {
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
- info->err_shadow = 0;
- return 0;
- }
- case MOXA_SET_BAUD_METHOD: {
- int method;
+ memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_head = (info->xmit_head + c) &
+ (SERIAL_XMIT_SIZE - 1);
+ info->xmit_cnt += c;
+ spin_unlock_irqrestore(&info->slock, flags);
- if (get_user(method, (int __user *)argp))
- return -EFAULT;
- mxser_set_baud_method[info->port] = method;
- if (copy_to_user(argp, &method, sizeof(int)))
- return -EFAULT;
+ buf += c;
+ count -= c;
+ total += c;
+ }
- return 0;
+ if (info->xmit_cnt && !tty->stopped) {
+ if (!tty->hw_stopped ||
+ (info->type == PORT_16550A) ||
+ (info->board->chip_flag)) {
+ spin_lock_irqsave(&info->slock, flags);
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr +
+ UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
}
- default:
- return -ENOIOCTLCMD;
}
- return 0;
+ return total;
}
-#ifndef CMSPAR
-#define CMSPAR 010000000000
-#endif
-
-static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
+static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
{
- int i, result, status;
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
- switch (cmd) {
- case MOXA_GET_CONF:
- if (copy_to_user(argp, mxsercfg,
- sizeof(struct mxser_hwconf) * 4))
- return -EFAULT;
- return 0;
- case MOXA_GET_MAJOR:
- if (copy_to_user(argp, &ttymajor, sizeof(int)))
- return -EFAULT;
+ if (!info->port.xmit_buf)
return 0;
- case MOXA_GET_CUMAJOR:
- if (copy_to_user(argp, &calloutmajor, sizeof(int)))
- return -EFAULT;
+ if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
return 0;
- case MOXA_CHKPORTENABLE:
- result = 0;
- for (i = 0; i < MXSER_PORTS; i++) {
- if (mxvar_table[i].base)
- result |= (1 << i);
+ spin_lock_irqsave(&info->slock, flags);
+ info->port.xmit_buf[info->xmit_head++] = ch;
+ info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+ info->xmit_cnt++;
+ spin_unlock_irqrestore(&info->slock, flags);
+ if (!tty->stopped) {
+ if (!tty->hw_stopped ||
+ (info->type == PORT_16550A) ||
+ info->board->chip_flag) {
+ spin_lock_irqsave(&info->slock, flags);
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
}
- return put_user(result, (unsigned long __user *)argp);
- case MOXA_GETDATACOUNT:
- if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
- return -EFAULT;
- return 0;
- case MOXA_GETMSTATUS:
- for (i = 0; i < MXSER_PORTS; i++) {
- GMStatus[i].ri = 0;
- if (!mxvar_table[i].base) {
- GMStatus[i].dcd = 0;
- GMStatus[i].dsr = 0;
- GMStatus[i].cts = 0;
- continue;
- }
-
- if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios)
- GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag;
- else
- GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag;
-
- status = inb(mxvar_table[i].base + UART_MSR);
- if (status & 0x80 /*UART_MSR_DCD */ )
- GMStatus[i].dcd = 1;
- else
- GMStatus[i].dcd = 0;
+ }
+ return 1;
+}
- if (status & 0x20 /*UART_MSR_DSR */ )
- GMStatus[i].dsr = 1;
- else
- GMStatus[i].dsr = 0;
+static void mxser_flush_chars(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
- if (status & 0x10 /*UART_MSR_CTS */ )
- GMStatus[i].cts = 1;
- else
- GMStatus[i].cts = 0;
- }
- if (copy_to_user(argp, GMStatus,
- sizeof(struct mxser_mstatus) * MXSER_PORTS))
- return -EFAULT;
- return 0;
- case MOXA_ASPP_MON_EXT: {
- int status;
- int opmode, p;
- int shiftbit;
- unsigned cflag, iflag;
+ if (info->xmit_cnt <= 0 ||
+ tty->stopped ||
+ !info->port.xmit_buf ||
+ (tty->hw_stopped &&
+ (info->type != PORT_16550A) &&
+ (!info->board->chip_flag)
+ ))
+ return;
- for (i = 0; i < MXSER_PORTS; i++) {
- if (!mxvar_table[i].base)
- continue;
+ spin_lock_irqsave(&info->slock, flags);
- status = mxser_get_msr(mxvar_table[i].base, 0,
- i, &(mxvar_table[i]));
- /*
- mxser_check_modem_status(&mxvar_table[i],
- status);
- */
- if (status & UART_MSR_TERI)
- mxvar_table[i].icount.rng++;
- if (status & UART_MSR_DDSR)
- mxvar_table[i].icount.dsr++;
- if (status & UART_MSR_DDCD)
- mxvar_table[i].icount.dcd++;
- if (status & UART_MSR_DCTS)
- mxvar_table[i].icount.cts++;
-
- mxvar_table[i].mon_data.modem_status = status;
- mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt;
- mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt;
- mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt;
- mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt;
- mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status;
- mon_data_ext.baudrate[i] = mxvar_table[i].realbaud;
-
- if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) {
- cflag = mxvar_table[i].normal_termios.c_cflag;
- iflag = mxvar_table[i].normal_termios.c_iflag;
- } else {
- cflag = mxvar_table[i].tty->termios->c_cflag;
- iflag = mxvar_table[i].tty->termios->c_iflag;
- }
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
- mon_data_ext.databits[i] = cflag & CSIZE;
+ spin_unlock_irqrestore(&info->slock, flags);
+}
- mon_data_ext.stopbits[i] = cflag & CSTOPB;
+static int mxser_write_room(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ int ret;
- mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR);
-
- mon_data_ext.flowctrl[i] = 0x00;
-
- if (cflag & CRTSCTS)
- mon_data_ext.flowctrl[i] |= 0x03;
-
- if (iflag & (IXON | IXOFF))
- mon_data_ext.flowctrl[i] |= 0x0C;
-
- if (mxvar_table[i].type == PORT_16550A)
- mon_data_ext.fifo[i] = 1;
- else
- mon_data_ext.fifo[i] = 0;
-
- p = i % 4;
- shiftbit = p * 2;
- opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit;
- opmode &= OP_MODE_MASK;
-
- mon_data_ext.iftype[i] = opmode;
-
- }
- if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext)))
- return -EFAULT;
-
- return 0;
-
- }
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void mxser_stoprx(struct tty_struct *tty)
-{
- struct mxser_struct *info = tty->driver_data;
- /* unsigned long flags; */
-
- info->ldisc_stop_rx = 1;
- if (I_IXOFF(tty)) {
- /* MX_LOCK(&info->slock); */
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag) {
- info->IER &= ~MOXA_MUST_RECV_ISR;
- outb(info->IER, info->base + UART_IER);
- } else {
- /* above add by Victor Yu. 09-02-2002 */
- info->x_char = STOP_CHAR(tty);
- /* mask by Victor Yu. 09-02-2002 */
- /* outb(info->IER, 0); */
- outb(0, info->base + UART_IER);
- info->IER |= UART_IER_THRI;
- /* force Tx interrupt */
- outb(info->IER, info->base + UART_IER);
- } /* add by Victor Yu. 09-02-2002 */
- /* MX_UNLOCK(&info->slock); */
- }
-
- if (info->tty->termios->c_cflag & CRTSCTS) {
- /* MX_LOCK(&info->slock); */
- info->MCR &= ~UART_MCR_RTS;
- outb(info->MCR, info->base + UART_MCR);
- /* MX_UNLOCK(&info->slock); */
- }
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
}
-static void mxser_startrx(struct tty_struct *tty)
+static int mxser_chars_in_buffer(struct tty_struct *tty)
{
- struct mxser_struct *info = tty->driver_data;
- /* unsigned long flags; */
-
- info->ldisc_stop_rx = 0;
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else {
- /* MX_LOCK(&info->slock); */
-
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag) {
- info->IER |= MOXA_MUST_RECV_ISR;
- outb(info->IER, info->base + UART_IER);
- } else {
- /* above add by Victor Yu. 09-02-2002 */
-
- info->x_char = START_CHAR(tty);
- /* mask by Victor Yu. 09-02-2002 */
- /* outb(info->IER, 0); */
- /* add by Victor Yu. 09-02-2002 */
- outb(0, info->base + UART_IER);
- /* force Tx interrupt */
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- } /* add by Victor Yu. 09-02-2002 */
- /* MX_UNLOCK(&info->slock); */
- }
- }
-
- if (info->tty->termios->c_cflag & CRTSCTS) {
- /* MX_LOCK(&info->slock); */
- info->MCR |= UART_MCR_RTS;
- outb(info->MCR, info->base + UART_MCR);
- /* MX_UNLOCK(&info->slock); */
- }
+ struct mxser_port *info = tty->driver_data;
+ return info->xmit_cnt;
}
/*
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ * friends of mxser_ioctl()
+ * ------------------------------------------------------------
*/
-static void mxser_throttle(struct tty_struct *tty)
+static int mxser_get_serial_info(struct mxser_port *info,
+ struct serial_struct __user *retinfo)
{
- /* struct mxser_struct *info = tty->driver_data; */
- /* unsigned long flags; */
-
- /* MX_LOCK(&info->slock); */
- mxser_stoprx(tty);
- /* MX_UNLOCK(&info->slock); */
+ struct serial_struct tmp = {
+ .type = info->type,
+ .line = info->port.tty->index,
+ .port = info->ioaddr,
+ .irq = info->board->irq,
+ .flags = info->port.flags,
+ .baud_base = info->baud_base,
+ .close_delay = info->port.close_delay,
+ .closing_wait = info->port.closing_wait,
+ .custom_divisor = info->custom_divisor,
+ .hub6 = 0
+ };
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
}
-static void mxser_unthrottle(struct tty_struct *tty)
+static int mxser_set_serial_info(struct mxser_port *info,
+ struct serial_struct __user *new_info)
{
- /* struct mxser_struct *info = tty->driver_data; */
- /* unsigned long flags; */
+ struct serial_struct new_serial;
+ speed_t baud;
+ unsigned long sl_flags;
+ unsigned int flags;
+ int retval = 0;
- /* MX_LOCK(&info->slock); */
- mxser_startrx(tty);
- /* MX_UNLOCK(&info->slock); */
-}
+ if (!new_info || !info->ioaddr)
+ return -ENODEV;
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
-static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct mxser_struct *info = tty->driver_data;
- unsigned long flags;
+ if (new_serial.irq != info->board->irq ||
+ new_serial.port != info->ioaddr)
+ return -EINVAL;
- mxser_change_speed(info, old_termios);
+ flags = info->port.flags & ASYNC_SPD_MASK;
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- mxser_start(tty);
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.baud_base != info->baud_base) ||
+ (new_serial.close_delay != info->port.close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ } else {
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+ info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
+ info->port.closing_wait = new_serial.closing_wait * HZ / 100;
+ info->port.tty->low_latency =
+ (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = 0;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
+ (new_serial.baud_base != info->baud_base ||
+ new_serial.custom_divisor !=
+ info->custom_divisor)) {
+ baud = new_serial.baud_base / new_serial.custom_divisor;
+ tty_encode_baud_rate(info->port.tty, baud, baud);
+ }
}
-/* Handle sw stopped */
- if ((old_termios->c_iflag & IXON) &&
- !(tty->termios->c_iflag & IXON)) {
- tty->stopped = 0;
+ info->type = new_serial.type;
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag) {
- spin_lock_irqsave(&info->slock, flags);
- DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
- spin_unlock_irqrestore(&info->slock, flags);
+ process_txrx_fifo(info);
+
+ if (info->port.flags & ASYNC_INITIALIZED) {
+ if (flags != (info->port.flags & ASYNC_SPD_MASK)) {
+ spin_lock_irqsave(&info->slock, sl_flags);
+ mxser_change_speed(info, NULL);
+ spin_unlock_irqrestore(&info->slock, sl_flags);
}
- /* above add by Victor Yu. 09-02-2002 */
+ } else
+ retval = mxser_startup(info);
- mxser_start(tty);
- }
+ return retval;
}
/*
- * mxser_stop() and mxser_start()
+ * mxser_get_lsr_info - get line status register info
*
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
*/
-static void mxser_stop(struct tty_struct *tty)
+static int mxser_get_lsr_info(struct mxser_port *info,
+ unsigned int __user *value)
{
- struct mxser_struct *info = tty->driver_data;
+ unsigned char status;
+ unsigned int result;
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
- if (info->IER & UART_IER_THRI) {
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
+ status = inb(info->ioaddr + UART_LSR);
spin_unlock_irqrestore(&info->slock, flags);
+ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
+ return put_user(result, value);
}
-static void mxser_start(struct tty_struct *tty)
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void mxser_send_break(struct mxser_port *info, int duration)
{
- struct mxser_struct *info = tty->driver_data;
unsigned long flags;
+ if (!info->ioaddr)
+ return;
+ set_current_state(TASK_INTERRUPTIBLE);
spin_lock_irqsave(&info->slock, flags);
- if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
+ outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ schedule_timeout(duration);
+ spin_lock_irqsave(&info->slock, flags);
+ outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
spin_unlock_irqrestore(&info->slock, flags);
}
-/*
- * mxser_wait_until_sent() --- wait until the transmitter is empty
- */
-static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
+static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct mxser_struct *info = tty->driver_data;
- unsigned long orig_jiffies, char_time;
- int lsr;
+ struct mxser_port *info = tty->driver_data;
+ unsigned char control, status;
+ unsigned long flags;
- if (info->type == PORT_UNKNOWN)
- return;
- if (info->xmit_fifo_size == 0)
- return; /* Just in case.... */
+ if (tty->index == MXSER_PORTS)
+ return -ENOIOCTLCMD;
+ if (test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
- orig_jiffies = jiffies;
- /*
- * Set the check interval to be 1/5 of the estimated time to
- * send a single character, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
- char_time = char_time / 5;
- if (char_time == 0)
- char_time = 1;
- if (timeout && timeout < char_time)
- char_time = timeout;
- /*
- * If the transmitter hasn't cleared in twice the approximate
- * amount of time to send the entire FIFO, it probably won't
- * ever clear. This assumes the UART isn't doing flow
- * control, which is currently the case. Hence, if it ever
- * takes longer than info->timeout, this is probably due to a
- * UART bug of some kind. So, we clamp the timeout parameter at
- * 2*info->timeout.
- */
- if (!timeout || timeout > 2 * info->timeout)
- timeout = 2 * info->timeout;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
- timeout, char_time);
- printk("jiff=%lu...", jiffies);
-#endif
- while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
- schedule_timeout_interruptible(char_time);
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- set_current_state(TASK_RUNNING);
+ control = info->MCR;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
+ spin_lock_irqsave(&info->slock, flags);
+ status = inb(info->ioaddr + UART_MSR);
+ if (status & UART_MSR_ANY_DELTA)
+ mxser_check_modem_status(info, status);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
+ ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
+ ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
+ ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
+ ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
+ ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
}
-
-/*
- * This routine is called by tty_hangup() when a hangup is signaled.
- */
-void mxser_hangup(struct tty_struct *tty)
+static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
{
- struct mxser_struct *info = tty->driver_data;
-
- mxser_flush_buffer(tty);
- mxser_shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
-/* added by James 03-12-2004. */
-/*
- * mxser_rs_break() --- routine which turns the break handling on or off
- */
-static void mxser_rs_break(struct tty_struct *tty, int break_state)
-{
- struct mxser_struct *info = tty->driver_data;
- unsigned long flags;
+ if (tty->index == MXSER_PORTS)
+ return -ENOIOCTLCMD;
+ if (test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
spin_lock_irqsave(&info->slock, flags);
- if (break_state == -1)
- outb(inb(info->base + UART_LCR) | UART_LCR_SBC,
- info->base + UART_LCR);
- else
- outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC,
- info->base + UART_LCR);
+
+ if (set & TIOCM_RTS)
+ info->MCR |= UART_MCR_RTS;
+ if (set & TIOCM_DTR)
+ info->MCR |= UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ info->MCR &= ~UART_MCR_RTS;
+ if (clear & TIOCM_DTR)
+ info->MCR &= ~UART_MCR_DTR;
+
+ outb(info->MCR, info->ioaddr + UART_MCR);
spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
}
-/* (above) added by James. */
-
+static int __init mxser_program_mode(int port)
+{
+ int id, i, j, n;
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t mxser_interrupt(int irq, void *dev_id)
-{
- int status, iir, i;
- struct mxser_struct *info;
- struct mxser_struct *port;
- int max, irqbits, bits, msr;
- int pass_counter = 0;
- int handled = IRQ_NONE;
-
- port = NULL;
- /* spin_lock(&gm_lock); */
+ outb(0, port);
+ outb(0, port);
+ outb(0, port);
+ (void)inb(port);
+ (void)inb(port);
+ outb(0, port);
+ (void)inb(port);
- for (i = 0; i < MXSER_BOARDS; i++) {
- if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
- port = dev_id;
+ id = inb(port + 1) & 0x1F;
+ if ((id != C168_ASIC_ID) &&
+ (id != C104_ASIC_ID) &&
+ (id != C102_ASIC_ID) &&
+ (id != CI132_ASIC_ID) &&
+ (id != CI134_ASIC_ID) &&
+ (id != CI104J_ASIC_ID))
+ return -1;
+ for (i = 0, j = 0; i < 4; i++) {
+ n = inb(port + 2);
+ if (n == 'M') {
+ j = 1;
+ } else if ((j == 1) && (n == 1)) {
+ j = 2;
break;
- }
+ } else
+ j = 0;
}
+ if (j != 2)
+ id = -2;
+ return id;
+}
- if (i == MXSER_BOARDS)
- goto irq_stop;
- if (port == 0)
- goto irq_stop;
- max = mxser_numports[mxsercfg[i].board_type - 1];
- while (1) {
- irqbits = inb(port->vector) & port->vectormask;
- if (irqbits == port->vectormask)
- break;
-
- handled = IRQ_HANDLED;
- for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
- if (irqbits == port->vectormask)
- break;
- if (bits & irqbits)
- continue;
- info = port + i;
-
- /* following add by Victor Yu. 09-13-2002 */
- iir = inb(info->base + UART_IIR);
- if (iir & UART_IIR_NO_INT)
- continue;
- iir &= MOXA_MUST_IIR_MASK;
- if (!info->tty) {
- status = inb(info->base + UART_LSR);
- outb(0x27, info->base + UART_FCR);
- inb(info->base + UART_MSR);
- continue;
- }
+static void __init mxser_normal_mode(int port)
+{
+ int i, n;
- /* mask by Victor Yu. 09-13-2002
- if ( !info->tty ||
- (inb(info->base + UART_IIR) & UART_IIR_NO_INT) )
- continue;
- */
- /* mask by Victor Yu. 09-02-2002
- status = inb(info->base + UART_LSR) & info->read_status_mask;
- */
-
- /* following add by Victor Yu. 09-02-2002 */
- status = inb(info->base + UART_LSR);
-
- if (status & UART_LSR_PE)
- info->err_shadow |= NPPI_NOTIFY_PARITY;
- if (status & UART_LSR_FE)
- info->err_shadow |= NPPI_NOTIFY_FRAMING;
- if (status & UART_LSR_OE)
- info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN;
- if (status & UART_LSR_BI)
- info->err_shadow |= NPPI_NOTIFY_BREAK;
-
- if (info->IsMoxaMustChipFlag) {
- /*
- if ( (status & 0x02) && !(status & 0x01) ) {
- outb(info->base+UART_FCR, 0x23);
- continue;
- }
- */
- if (iir == MOXA_MUST_IIR_GDA ||
- iir == MOXA_MUST_IIR_RDA ||
- iir == MOXA_MUST_IIR_RTO ||
- iir == MOXA_MUST_IIR_LSR)
- mxser_receive_chars(info, &status);
+ outb(0xA5, port + 1);
+ outb(0x80, port + 3);
+ outb(12, port + 0); /* 9600 bps */
+ outb(0, port + 1);
+ outb(0x03, port + 3); /* 8 data bits */
+ outb(0x13, port + 4); /* loop back mode */
+ for (i = 0; i < 16; i++) {
+ n = inb(port + 5);
+ if ((n & 0x61) == 0x60)
+ break;
+ if ((n & 1) == 1)
+ (void)inb(port);
+ }
+ outb(0x00, port + 4);
+}
- } else {
- /* above add by Victor Yu. 09-02-2002 */
+#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
+#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
+#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
+#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
+#define EN_CCMD 0x000 /* Chip's command register */
+#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
+#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
+#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
+#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
+#define EN0_DCFG 0x00E /* Data configuration reg WR */
+#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
+#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
+#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
+static int __init mxser_read_register(int port, unsigned short *regs)
+{
+ int i, k, value, id;
+ unsigned int j;
- status &= info->read_status_mask;
- if (status & UART_LSR_DR)
- mxser_receive_chars(info, &status);
- }
- msr = inb(info->base + UART_MSR);
- if (msr & UART_MSR_ANY_DELTA) {
- mxser_check_modem_status(info, msr);
- }
- /* following add by Victor Yu. 09-13-2002 */
- if (info->IsMoxaMustChipFlag) {
- if ((iir == 0x02) && (status & UART_LSR_THRE)) {
- mxser_transmit_chars(info);
- }
+ id = mxser_program_mode(port);
+ if (id < 0)
+ return id;
+ for (i = 0; i < 14; i++) {
+ k = (i & 0x3F) | 0x180;
+ for (j = 0x100; j > 0; j >>= 1) {
+ outb(CHIP_CS, port);
+ if (k & j) {
+ outb(CHIP_CS | CHIP_DO, port);
+ outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
} else {
- /* above add by Victor Yu. 09-13-2002 */
-
- if (status & UART_LSR_THRE) {
-/* 8-2-99 by William
- if ( info->x_char || (info->xmit_cnt > 0) )
-*/
- mxser_transmit_chars(info);
- }
+ outb(CHIP_CS, port);
+ outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
}
}
- if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
- break; /* Prevent infinite loops */
+ (void)inb(port);
+ value = 0;
+ for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
+ outb(CHIP_CS, port);
+ outb(CHIP_CS | CHIP_SK, port);
+ if (inb(port) & CHIP_DI)
+ value |= j;
}
+ regs[i] = value;
+ outb(0, port);
}
-
- irq_stop:
- /* spin_unlock(&gm_lock); */
- return handled;
+ mxser_normal_mode(port);
+ return id;
}
-static void mxser_receive_chars(struct mxser_struct *info, int *status)
+static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
{
- struct tty_struct *tty = info->tty;
- unsigned char ch, gdl;
- int ignored = 0;
- int cnt = 0;
- int recv_room;
- int max = 256;
- unsigned long flags;
+ struct mxser_port *port;
+ int result, status;
+ unsigned int i, j;
+ int ret = 0;
- spin_lock_irqsave(&info->slock, flags);
+ switch (cmd) {
+ case MOXA_GET_MAJOR:
+ return put_user(ttymajor, (int __user *)argp);
- recv_room = tty->receive_room;
- if ((recv_room == 0) && (!info->ldisc_stop_rx)) {
- /* mxser_throttle(tty); */
- mxser_stoprx(tty);
- /* return; */
- }
+ case MOXA_CHKPORTENABLE:
+ result = 0;
+ lock_kernel();
+ for (i = 0; i < MXSER_BOARDS; i++)
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
+ if (mxser_boards[i].ports[j].ioaddr)
+ result |= (1 << i);
+ unlock_kernel();
+ return put_user(result, (unsigned long __user *)argp);
+ case MOXA_GETDATACOUNT:
+ lock_kernel();
+ if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
+ ret = -EFAULT;
+ unlock_kernel();
+ return ret;
+ case MOXA_GETMSTATUS:
+ lock_kernel();
+ for (i = 0; i < MXSER_BOARDS; i++)
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+ port = &mxser_boards[i].ports[j];
+
+ GMStatus[i].ri = 0;
+ if (!port->ioaddr) {
+ GMStatus[i].dcd = 0;
+ GMStatus[i].dsr = 0;
+ GMStatus[i].cts = 0;
+ continue;
+ }
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
+ if (!port->port.tty || !port->port.tty->termios)
+ GMStatus[i].cflag =
+ port->normal_termios.c_cflag;
+ else
+ GMStatus[i].cflag =
+ port->port.tty->termios->c_cflag;
- if (*status & UART_LSR_SPECIAL) {
- goto intr_old;
- }
- /* following add by Victor Yu. 02-11-2004 */
- if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID &&
- (*status & MOXA_MUST_LSR_RERR))
- goto intr_old;
- /* above add by Victor Yu. 02-14-2004 */
- if (*status & MOXA_MUST_LSR_RERR)
- goto intr_old;
+ status = inb(port->ioaddr + UART_MSR);
+ if (status & 0x80 /*UART_MSR_DCD */ )
+ GMStatus[i].dcd = 1;
+ else
+ GMStatus[i].dcd = 0;
- gdl = inb(info->base + MOXA_MUST_GDL_REGISTER);
+ if (status & 0x20 /*UART_MSR_DSR */ )
+ GMStatus[i].dsr = 1;
+ else
+ GMStatus[i].dsr = 0;
- /* add by Victor Yu. 02-11-2004 */
- if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID)
- gdl &= MOXA_MUST_GDL_MASK;
- if (gdl >= recv_room) {
- if (!info->ldisc_stop_rx) {
- /* mxser_throttle(tty); */
- mxser_stoprx(tty);
+
+ if (status & 0x10 /*UART_MSR_CTS */ )
+ GMStatus[i].cts = 1;
+ else
+ GMStatus[i].cts = 0;
}
- /* return; */
- }
- while (gdl--) {
- ch = inb(info->base + UART_RX);
- tty_insert_flip_char(tty, ch, 0);
- cnt++;
- /*
- if ((cnt >= HI_WATER) && (info->stop_rx == 0)) {
- mxser_stoprx(tty);
- info->stop_rx = 1;
- break;
- } */
- }
- goto end_intr;
- }
- intr_old:
- /* above add by Victor Yu. 09-02-2002 */
+ unlock_kernel();
+ if (copy_to_user(argp, GMStatus,
+ sizeof(struct mxser_mstatus) * MXSER_PORTS))
+ return -EFAULT;
+ return 0;
+ case MOXA_ASPP_MON_EXT: {
+ int p, shiftbit;
+ unsigned long opmode;
+ unsigned cflag, iflag;
- do {
- if (max-- < 0)
- break;
- /*
- if ((cnt >= HI_WATER) && (info->stop_rx == 0)) {
- mxser_stoprx(tty);
- info->stop_rx=1;
- break;
- }
- */
+ lock_kernel();
+ for (i = 0; i < MXSER_BOARDS; i++) {
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+ port = &mxser_boards[i].ports[j];
+ if (!port->ioaddr)
+ continue;
- ch = inb(info->base + UART_RX);
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ )
- outb(0x23, info->base + UART_FCR);
- *status &= info->read_status_mask;
- /* above add by Victor Yu. 09-02-2002 */
- if (*status & info->ignore_status_mask) {
- if (++ignored > 100)
- break;
- } else {
- char flag = 0;
- if (*status & UART_LSR_SPECIAL) {
- if (*status & UART_LSR_BI) {
- flag = TTY_BREAK;
-/* added by casper 1/11/2000 */
- info->icount.brk++;
-/* */
- if (info->flags & ASYNC_SAK)
- do_SAK(tty);
- } else if (*status & UART_LSR_PE) {
- flag = TTY_PARITY;
-/* added by casper 1/11/2000 */
- info->icount.parity++;
-/* */
- } else if (*status & UART_LSR_FE) {
- flag = TTY_FRAME;
-/* added by casper 1/11/2000 */
- info->icount.frame++;
-/* */
- } else if (*status & UART_LSR_OE) {
- flag = TTY_OVERRUN;
-/* added by casper 1/11/2000 */
- info->icount.overrun++;
-/* */
- }
- }
- tty_insert_flip_char(tty, ch, flag);
- cnt++;
- if (cnt >= recv_room) {
- if (!info->ldisc_stop_rx) {
- /* mxser_throttle(tty); */
- mxser_stoprx(tty);
+ status = mxser_get_msr(port->ioaddr, 0, i);
+
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (status & UART_MSR_DCTS)
+ port->icount.cts++;
+
+ port->mon_data.modem_status = status;
+ mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
+ mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
+ mon_data_ext.up_rxcnt[i] =
+ port->mon_data.up_rxcnt;
+ mon_data_ext.up_txcnt[i] =
+ port->mon_data.up_txcnt;
+ mon_data_ext.modem_status[i] =
+ port->mon_data.modem_status;
+ mon_data_ext.baudrate[i] =
+ tty_get_baud_rate(port->port.tty);
+
+ if (!port->port.tty || !port->port.tty->termios) {
+ cflag = port->normal_termios.c_cflag;
+ iflag = port->normal_termios.c_iflag;
+ } else {
+ cflag = port->port.tty->termios->c_cflag;
+ iflag = port->port.tty->termios->c_iflag;
}
- break;
- }
- }
+ mon_data_ext.databits[i] = cflag & CSIZE;
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag)
- break;
- /* above add by Victor Yu. 09-02-2002 */
+ mon_data_ext.stopbits[i] = cflag & CSTOPB;
- /* mask by Victor Yu. 09-02-2002
- *status = inb(info->base + UART_LSR) & info->read_status_mask;
- */
- /* following add by Victor Yu. 09-02-2002 */
- *status = inb(info->base + UART_LSR);
- /* above add by Victor Yu. 09-02-2002 */
- } while (*status & UART_LSR_DR);
+ mon_data_ext.parity[i] =
+ cflag & (PARENB | PARODD | CMSPAR);
-end_intr: /* add by Victor Yu. 09-02-2002 */
- mxvar_log.rxcnt[info->port] += cnt;
- info->mon_data.rxcnt += cnt;
- info->mon_data.up_rxcnt += cnt;
- spin_unlock_irqrestore(&info->slock, flags);
+ mon_data_ext.flowctrl[i] = 0x00;
- tty_flip_buffer_push(tty);
-}
+ if (cflag & CRTSCTS)
+ mon_data_ext.flowctrl[i] |= 0x03;
-static void mxser_transmit_chars(struct mxser_struct *info)
-{
- int count, cnt;
- unsigned long flags;
+ if (iflag & (IXON | IXOFF))
+ mon_data_ext.flowctrl[i] |= 0x0C;
- spin_lock_irqsave(&info->slock, flags);
+ if (port->type == PORT_16550A)
+ mon_data_ext.fifo[i] = 1;
+ else
+ mon_data_ext.fifo[i] = 0;
- if (info->x_char) {
- outb(info->x_char, info->base + UART_TX);
- info->x_char = 0;
- mxvar_log.txcnt[info->port]++;
- info->mon_data.txcnt++;
- info->mon_data.up_txcnt++;
+ p = i % 4;
+ shiftbit = p * 2;
+ opmode = inb(port->opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
-/* added by casper 1/11/2000 */
- info->icount.tx++;
-/* */
- spin_unlock_irqrestore(&info->slock, flags);
- return;
- }
+ mon_data_ext.iftype[i] = opmode;
- if (info->xmit_buf == 0) {
- spin_unlock_irqrestore(&info->slock, flags);
- return;
+ }
+ }
+ unlock_kernel();
+ if (copy_to_user(argp, &mon_data_ext,
+ sizeof(mon_data_ext)))
+ return -EFAULT;
+ return 0;
}
-
- if ((info->xmit_cnt <= 0) || info->tty->stopped ||
- (info->tty->hw_stopped &&
- (info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag))) {
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- spin_unlock_irqrestore(&info->slock, flags);
- return;
+ default:
+ return -ENOIOCTLCMD;
}
+ return 0;
+}
- cnt = info->xmit_cnt;
- count = info->xmit_fifo_size;
- do {
- outb(info->xmit_buf[info->xmit_tail++],
- info->base + UART_TX);
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1);
- if (--info->xmit_cnt <= 0)
- break;
- } while (--count > 0);
- mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt);
+static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
+ struct async_icount *cprev)
+{
+ struct async_icount cnow;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount; /* atomic copy */
+ spin_unlock_irqrestore(&info->slock, flags);
-/* added by James 03-12-2004. */
- info->mon_data.txcnt += (cnt - info->xmit_cnt);
- info->mon_data.up_txcnt += (cnt - info->xmit_cnt);
-/* (above) added by James. */
+ ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
-/* added by casper 1/11/2000 */
- info->icount.tx += (cnt - info->xmit_cnt);
-/* */
+ *cprev = cnow;
- if (info->xmit_cnt < WAKEUP_CHARS) {
- set_bit(MXSER_EVENT_TXLOW, &info->event);
- schedule_work(&info->tqueue);
- }
- if (info->xmit_cnt <= 0) {
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- spin_unlock_irqrestore(&info->slock, flags);
+ return ret;
}
-static void mxser_check_modem_status(struct mxser_struct *info, int status)
+static int mxser_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- /* update input line counters */
- if (status & UART_MSR_TERI)
- info->icount.rng++;
- if (status & UART_MSR_DDSR)
- info->icount.dsr++;
- if (status & UART_MSR_DDCD)
- info->icount.dcd++;
- if (status & UART_MSR_DCTS)
- info->icount.cts++;
- info->mon_data.modem_status = status;
- wake_up_interruptible(&info->delta_msr_wait);
+ struct mxser_port *info = tty->driver_data;
+ struct async_icount cnow;
+ struct serial_icounter_struct __user *p_cuser;
+ unsigned long flags;
+ void __user *argp = (void __user *)arg;
+ int retval;
- if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
- if (status & UART_MSR_DCD)
- wake_up_interruptible(&info->open_wait);
- schedule_work(&info->tqueue);
- }
+ if (tty->index == MXSER_PORTS)
+ return mxser_ioctl_special(cmd, argp);
- if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty->hw_stopped) {
- if (status & UART_MSR_CTS) {
- info->tty->hw_stopped = 0;
+ if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
+ int p;
+ unsigned long opmode;
+ static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
+ int shiftbit;
+ unsigned char val, mask;
- if ((info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag)) {
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- set_bit(MXSER_EVENT_TXLOW, &info->event);
- schedule_work(&info->tqueue); }
+ p = tty->index % 4;
+ if (cmd == MOXA_SET_OP_MODE) {
+ if (get_user(opmode, (int __user *) argp))
+ return -EFAULT;
+ if (opmode != RS232_MODE &&
+ opmode != RS485_2WIRE_MODE &&
+ opmode != RS422_MODE &&
+ opmode != RS485_4WIRE_MODE)
+ return -EFAULT;
+ lock_kernel();
+ mask = ModeMask[p];
+ shiftbit = p * 2;
+ val = inb(info->opmode_ioaddr);
+ val &= mask;
+ val |= (opmode << shiftbit);
+ outb(val, info->opmode_ioaddr);
+ unlock_kernel();
} else {
- if (!(status & UART_MSR_CTS)) {
- info->tty->hw_stopped = 1;
- if ((info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag)) {
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- }
+ lock_kernel();
+ shiftbit = p * 2;
+ opmode = inb(info->opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
+ unlock_kernel();
+ if (put_user(opmode, (int __user *)argp))
+ return -EFAULT;
}
+ return 0;
}
-}
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- unsigned long flags;
+ if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+ test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ switch (cmd) {
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (!arg)
+ mxser_send_break(info, HZ / 4); /* 1/4 second */
return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
+ return 0;
+ case TIOCGSERIAL:
+ lock_kernel();
+ retval = mxser_get_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
+ case TIOCSSERIAL:
+ lock_kernel();
+ retval = mxser_set_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
+ case TIOCSERGETLSR: /* Get line status register */
+ return mxser_get_lsr_info(info, argp);
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->slock, flags);
+ return wait_event_interruptible(info->delta_msr_wait,
+ mxser_cflags_changed(info, arg, &cnow));
/*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * mxser_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
*/
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-
- spin_lock_irqsave(&info->slock, flags);
- if (!tty_hung_up_p(filp))
- info->count--;
- spin_unlock_irqrestore(&info->slock, flags);
- info->blocked_open++;
- while (1) {
+ case TIOCGICOUNT:
spin_lock_irqsave(&info->slock, flags);
- outb(inb(info->base + UART_MCR) |
- UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR);
+ cnow = info->icount;
spin_unlock_irqrestore(&info->slock, flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) {
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal ||
- (inb(info->base + UART_MSR) & UART_MSR_DCD)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
+ p_cuser = argp;
+ if (put_user(cnow.frame, &p_cuser->frame))
+ return -EFAULT;
+ if (put_user(cnow.brk, &p_cuser->brk))
+ return -EFAULT;
+ if (put_user(cnow.overrun, &p_cuser->overrun))
+ return -EFAULT;
+ if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+ return -EFAULT;
+ if (put_user(cnow.parity, &p_cuser->parity))
+ return -EFAULT;
+ if (put_user(cnow.rx, &p_cuser->rx))
+ return -EFAULT;
+ if (put_user(cnow.tx, &p_cuser->tx))
+ return -EFAULT;
+ put_user(cnow.cts, &p_cuser->cts);
+ put_user(cnow.dsr, &p_cuser->dsr);
+ put_user(cnow.rng, &p_cuser->rng);
+ put_user(cnow.dcd, &p_cuser->dcd);
+ return 0;
+ case MOXA_HighSpeedOn:
+ return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
+ case MOXA_SDS_RSTICOUNTER:
+ lock_kernel();
+ info->mon_data.rxcnt = 0;
+ info->mon_data.txcnt = 0;
+ unlock_kernel();
+ return 0;
+
+ case MOXA_ASPP_OQUEUE:{
+ int len, lsr;
+
+ lock_kernel();
+ len = mxser_chars_in_buffer(tty);
+ lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
+ len += (lsr ? 0 : 1);
+ unlock_kernel();
+
+ return put_user(len, (int __user *)argp);
}
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
+ case MOXA_ASPP_MON: {
+ int mcr, status;
-static int mxser_startup(struct mxser_struct *info)
-{
- unsigned long page;
- unsigned long flags;
+ lock_kernel();
+ status = mxser_get_msr(info->ioaddr, 1, tty->index);
+ mxser_check_modem_status(info, status);
- page = __get_free_page(GFP_KERNEL);
- if (!page)
- return -ENOMEM;
+ mcr = inb(info->ioaddr + UART_MCR);
+ if (mcr & MOXA_MUST_MCR_XON_FLAG)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
- spin_lock_irqsave(&info->slock, flags);
+ if (mcr & MOXA_MUST_MCR_TX_XON)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
+
+ if (info->port.tty->hw_stopped)
+ info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
+ else
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
+ unlock_kernel();
+ if (copy_to_user(argp, &info->mon_data,
+ sizeof(struct mxser_mon)))
+ return -EFAULT;
- if (info->flags & ASYNC_INITIALIZED) {
- free_page(page);
- spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
+ case MOXA_ASPP_LSTATUS: {
+ if (put_user(info->err_shadow, (unsigned char __user *)argp))
+ return -EFAULT;
- if (!info->base || !info->type) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- free_page(page);
- spin_unlock_irqrestore(&info->slock, flags);
+ info->err_shadow = 0;
return 0;
}
- if (info->xmit_buf)
- free_page(page);
- else
- info->xmit_buf = (unsigned char *) page;
-
- /*
- * Clear the FIFO buffers and disable them
- * (they will be reenabled in mxser_change_speed())
- */
- if (info->IsMoxaMustChipFlag)
- outb((UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT |
- MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
- else
- outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->base + UART_FCR);
+ case MOXA_SET_BAUD_METHOD: {
+ int method;
- /*
- * At this point there's no way the LSR could still be 0xFF;
- * if it is, then bail out, because there's likely no UART
- * here.
- */
- if (inb(info->base + UART_LSR) == 0xff) {
- spin_unlock_irqrestore(&info->slock, flags);
- if (capable(CAP_SYS_ADMIN)) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- return 0;
- } else
- return -ENODEV;
+ if (get_user(method, (int __user *)argp))
+ return -EFAULT;
+ mxser_set_baud_method[tty->index] = method;
+ return put_user(method, (int __user *)argp);
}
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
- /*
- * Clear the interrupt registers.
- */
- (void) inb(info->base + UART_LSR);
- (void) inb(info->base + UART_RX);
- (void) inb(info->base + UART_IIR);
- (void) inb(info->base + UART_MSR);
-
- /*
- * Now, initialize the UART
- */
- outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */
- info->MCR = UART_MCR_DTR | UART_MCR_RTS;
- outb(info->MCR, info->base + UART_MCR);
+static void mxser_stoprx(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
- /*
- * Finally, enable interrupts
- */
- info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- /* info->IER = UART_IER_RLSI | UART_IER_RDI; */
+ info->ldisc_stop_rx = 1;
+ if (I_IXOFF(tty)) {
+ if (info->board->chip_flag) {
+ info->IER &= ~MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->ioaddr + UART_IER);
+ } else {
+ info->x_char = STOP_CHAR(tty);
+ outb(0, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ }
- /* following add by Victor Yu. 08-30-2002 */
- if (info->IsMoxaMustChipFlag)
- info->IER |= MOXA_MUST_IER_EGDAI;
- /* above add by Victor Yu. 08-30-2002 */
- outb(info->IER, info->base + UART_IER); /* enable interrupts */
+ if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ info->MCR &= ~UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ }
+}
- /*
- * And clear the interrupt registers again for luck.
- */
- (void) inb(info->base + UART_LSR);
- (void) inb(info->base + UART_RX);
- (void) inb(info->base + UART_IIR);
- (void) inb(info->base + UART_MSR);
+/*
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ */
+static void mxser_throttle(struct tty_struct *tty)
+{
+ mxser_stoprx(tty);
+}
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+static void mxser_unthrottle(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
- /*
- * and set the speed of the serial port
- */
- spin_unlock_irqrestore(&info->slock, flags);
- mxser_change_speed(info, NULL);
+ /* startrx */
+ info->ldisc_stop_rx = 0;
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else {
+ if (info->board->chip_flag) {
+ info->IER |= MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->ioaddr + UART_IER);
+ } else {
+ info->x_char = START_CHAR(tty);
+ outb(0, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ }
+ }
- info->flags |= ASYNC_INITIALIZED;
- return 0;
+ if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ info->MCR |= UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ }
}
/*
- * This routine will shutdown a serial port; interrupts maybe disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
+ * mxser_stop() and mxser_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
*/
-static void mxser_shutdown(struct mxser_struct *info)
+static void mxser_stop(struct tty_struct *tty)
{
+ struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
spin_lock_irqsave(&info->slock, flags);
-
- /*
- * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
- * here so the queue might never be waken up
- */
- wake_up_interruptible(&info->delta_msr_wait);
-
- /*
- * Free the IRQ, if necessary
- */
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = NULL;
+ if (info->IER & UART_IER_THRI) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
}
+ spin_unlock_irqrestore(&info->slock, flags);
+}
- info->IER = 0;
- outb(0x00, info->base + UART_IER);
-
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
- info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
- outb(info->MCR, info->base + UART_MCR);
-
- /* clear Rx/Tx FIFO's */
- /* following add by Victor Yu. 08-30-2002 */
- if (info->IsMoxaMustChipFlag)
- outb((UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT |
- MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
- else
- /* above add by Victor Yu. 08-30-2002 */
- outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->base + UART_FCR);
-
- /* read data port to reset things */
- (void) inb(info->base + UART_RX);
-
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
-
- /* following add by Victor Yu. 09-23-2002 */
- if (info->IsMoxaMustChipFlag)
- SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base);
- /* above add by Victor Yu. 09-23-2002 */
+static void mxser_start(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+ spin_lock_irqsave(&info->slock, flags);
+ if (info->xmit_cnt && info->port.xmit_buf) {
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
spin_unlock_irqrestore(&info->slock, flags);
}
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static int mxser_change_speed(struct mxser_struct *info, struct ktermios *old_termios)
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- unsigned cflag, cval, fcr;
- int ret = 0;
- unsigned char status;
- long baud;
+ struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (!info->tty || !info->tty->termios)
- return ret;
- cflag = info->tty->termios->c_cflag;
- if (!(info->base))
- return ret;
+ spin_lock_irqsave(&info->slock, flags);
+ mxser_change_speed(info, old_termios);
+ spin_unlock_irqrestore(&info->slock, flags);
-#ifndef B921600
-#define B921600 (B460800 +1)
-#endif
- if (mxser_set_baud_method[info->port] == 0) {
- baud = tty_get_baud_rate(info->tty);
- mxser_set_baud(info, baud);
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ mxser_start(tty);
}
- /* byte size and parity */
- switch (cflag & CSIZE) {
- case CS5:
- cval = 0x00;
- break;
- case CS6:
- cval = 0x01;
- break;
- case CS7:
- cval = 0x02;
- break;
- case CS8:
- cval = 0x03;
- break;
- default:
- cval = 0x00;
- break; /* too keep GCC shut... */
- }
- if (cflag & CSTOPB)
- cval |= 0x04;
- if (cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(cflag & PARODD))
- cval |= UART_LCR_EPAR;
- if (cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
+ /* Handle sw stopped */
+ if ((old_termios->c_iflag & IXON) &&
+ !(tty->termios->c_iflag & IXON)) {
+ tty->stopped = 0;
- if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
- if (info->IsMoxaMustChipFlag) {
- fcr = UART_FCR_ENABLE_FIFO;
- fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
- SET_MOXA_MUST_FIFO_VALUE(info);
- } else
- fcr = 0;
- } else {
- fcr = UART_FCR_ENABLE_FIFO;
- /* following add by Victor Yu. 08-30-2002 */
- if (info->IsMoxaMustChipFlag) {
- fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
- SET_MOXA_MUST_FIFO_VALUE(info);
- } else {
- /* above add by Victor Yu. 08-30-2002 */
- switch (info->rx_trigger) {
- case 1:
- fcr |= UART_FCR_TRIGGER_1;
- break;
- case 4:
- fcr |= UART_FCR_TRIGGER_4;
- break;
- case 8:
- fcr |= UART_FCR_TRIGGER_8;
- break;
- default:
- fcr |= UART_FCR_TRIGGER_14;
- break;
- }
+ if (info->board->chip_flag) {
+ spin_lock_irqsave(&info->slock, flags);
+ mxser_disable_must_rx_software_flow_control(
+ info->ioaddr);
+ spin_unlock_irqrestore(&info->slock, flags);
}
- }
- /* CTS flow control flag and modem status interrupts */
- info->IER &= ~UART_IER_MSI;
- info->MCR &= ~UART_MCR_AFE;
- if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
- info->IER |= UART_IER_MSI;
- if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
- info->MCR |= UART_MCR_AFE;
- } else {
- status = inb(info->base + UART_MSR);
- if (info->tty->hw_stopped) {
- if (status & UART_MSR_CTS) {
- info->tty->hw_stopped = 0;
- if ((info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag)) {
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- set_bit(MXSER_EVENT_TXLOW, &info->event);
- schedule_work(&info->tqueue); }
- } else {
- if (!(status & UART_MSR_CTS)) {
- info->tty->hw_stopped = 1;
- if ((info->type != PORT_16550A) &&
- (!info->IsMoxaMustChipFlag)) {
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- }
- }
- }
- } else {
- info->flags &= ~ASYNC_CTS_FLOW;
- }
- outb(info->MCR, info->base + UART_MCR);
- if (cflag & CLOCAL) {
- info->flags &= ~ASYNC_CHECK_CD;
- } else {
- info->flags |= ASYNC_CHECK_CD;
- info->IER |= UART_IER_MSI;
+ mxser_start(tty);
}
- outb(info->IER, info->base + UART_IER);
+}
- /*
- * Set up parity check flag
- */
- info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (I_INPCK(info->tty))
- info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
- info->read_status_mask |= UART_LSR_BI;
+/*
+ * mxser_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+ int lsr;
- info->ignore_status_mask = 0;
+ if (info->type == PORT_UNKNOWN)
+ return;
- if (I_IGNBRK(info->tty)) {
- info->ignore_status_mask |= UART_LSR_BI;
- info->read_status_mask |= UART_LSR_BI;
- /*
- * If we're ignore parity and break indicators, ignore
- * overruns too. (For real raw support).
- */
- if (I_IGNPAR(info->tty)) {
- info->ignore_status_mask |=
- UART_LSR_OE |
- UART_LSR_PE |
- UART_LSR_FE;
- info->read_status_mask |=
- UART_LSR_OE |
- UART_LSR_PE |
- UART_LSR_FE;
- }
- }
- /* following add by Victor Yu. 09-02-2002 */
- if (info->IsMoxaMustChipFlag) {
- spin_lock_irqsave(&info->slock, flags);
- SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty));
- SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty));
- if (I_IXON(info->tty)) {
- ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
- } else {
- DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
- }
- if (I_IXOFF(info->tty)) {
- ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
- } else {
- DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
- }
- /*
- if ( I_IXANY(info->tty) ) {
- info->MCR |= MOXA_MUST_MCR_XON_ANY;
- ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
- } else {
- info->MCR &= ~MOXA_MUST_MCR_XON_ANY;
- DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
- }
- */
- spin_unlock_irqrestore(&info->slock, flags);
+ if (info->xmit_fifo_size == 0)
+ return; /* Just in case.... */
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2 * info->timeout)
+ timeout = 2 * info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
+ timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+ lock_kernel();
+ while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+ schedule_timeout_interruptible(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
}
- /* above add by Victor Yu. 09-02-2002 */
+ set_current_state(TASK_RUNNING);
+ unlock_kernel();
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
- outb(fcr, info->base + UART_FCR); /* set fcr */
- outb(cval, info->base + UART_LCR);
+/*
+ * This routine is called by tty_hangup() when a hangup is signaled.
+ */
+static void mxser_hangup(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
- return ret;
+ mxser_flush_buffer(tty);
+ mxser_shutdown(info);
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+ wake_up_interruptible(&info->port.open_wait);
}
-
-static int mxser_set_baud(struct mxser_struct *info, long newspd)
+/*
+ * mxser_rs_break() --- routine which turns the break handling on or off
+ */
+static void mxser_rs_break(struct tty_struct *tty, int break_state)
{
- int quot = 0;
- unsigned char cval;
- int ret = 0;
+ struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (!info->tty || !info->tty->termios)
- return ret;
+ spin_lock_irqsave(&info->slock, flags);
+ if (break_state == -1)
+ outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ else
+ outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+}
- if (!(info->base))
- return ret;
+static void mxser_receive_chars(struct mxser_port *port, int *status)
+{
+ struct tty_struct *tty = port->port.tty;
+ unsigned char ch, gdl;
+ int ignored = 0;
+ int cnt = 0;
+ int recv_room;
+ int max = 256;
- if (newspd > info->MaxCanSetBaudRate)
- return 0;
+ recv_room = tty->receive_room;
+ if ((recv_room == 0) && (!port->ldisc_stop_rx))
+ mxser_stoprx(tty);
- info->realbaud = newspd;
- if (newspd == 134) {
- quot = (2 * info->baud_base / 269);
- } else if (newspd) {
- quot = info->baud_base / newspd;
- if (quot == 0)
- quot = 1;
- } else {
- quot = 0;
- }
+ if (port->board->chip_flag != MOXA_OTHER_UART) {
- info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
- info->timeout += HZ / 50; /* Add .02 seconds of slop */
+ if (*status & UART_LSR_SPECIAL)
+ goto intr_old;
+ if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
+ (*status & MOXA_MUST_LSR_RERR))
+ goto intr_old;
+ if (*status & MOXA_MUST_LSR_RERR)
+ goto intr_old;
- if (quot) {
- spin_lock_irqsave(&info->slock, flags);
- info->MCR |= UART_MCR_DTR;
- outb(info->MCR, info->base + UART_MCR);
- spin_unlock_irqrestore(&info->slock, flags);
- } else {
- spin_lock_irqsave(&info->slock, flags);
- info->MCR &= ~UART_MCR_DTR;
- outb(info->MCR, info->base + UART_MCR);
- spin_unlock_irqrestore(&info->slock, flags);
- return ret;
+ gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
+
+ if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
+ gdl &= MOXA_MUST_GDL_MASK;
+ if (gdl >= recv_room) {
+ if (!port->ldisc_stop_rx)
+ mxser_stoprx(tty);
+ }
+ while (gdl--) {
+ ch = inb(port->ioaddr + UART_RX);
+ tty_insert_flip_char(tty, ch, 0);
+ cnt++;
+ }
+ goto end_intr;
}
+intr_old:
- cval = inb(info->base + UART_LCR);
+ do {
+ if (max-- < 0)
+ break;
- outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */
+ ch = inb(port->ioaddr + UART_RX);
+ if (port->board->chip_flag && (*status & UART_LSR_OE))
+ outb(0x23, port->ioaddr + UART_FCR);
+ *status &= port->read_status_mask;
+ if (*status & port->ignore_status_mask) {
+ if (++ignored > 100)
+ break;
+ } else {
+ char flag = 0;
+ if (*status & UART_LSR_SPECIAL) {
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ port->icount.brk++;
- outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */
- outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */
- outb(cval, info->base + UART_LCR); /* reset DLAB */
+ if (port->port.flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (*status & UART_LSR_PE) {
+ flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (*status & UART_LSR_FE) {
+ flag = TTY_FRAME;
+ port->icount.frame++;
+ } else if (*status & UART_LSR_OE) {
+ flag = TTY_OVERRUN;
+ port->icount.overrun++;
+ } else
+ flag = TTY_BREAK;
+ }
+ tty_insert_flip_char(tty, ch, flag);
+ cnt++;
+ if (cnt >= recv_room) {
+ if (!port->ldisc_stop_rx)
+ mxser_stoprx(tty);
+ break;
+ }
+ }
- return ret;
-}
+ if (port->board->chip_flag)
+ break;
-/*
- * ------------------------------------------------------------
- * friends of mxser_ioctl()
- * ------------------------------------------------------------
- */
-static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo)
-{
- struct serial_struct tmp;
+ *status = inb(port->ioaddr + UART_LSR);
+ } while (*status & UART_LSR_DR);
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->port;
- tmp.port = info->base;
- tmp.irq = info->irq;
- tmp.flags = info->flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- tmp.hub6 = 0;
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
- return 0;
+end_intr:
+ mxvar_log.rxcnt[port->port.tty->index] += cnt;
+ port->mon_data.rxcnt += cnt;
+ port->mon_data.up_rxcnt += cnt;
+
+ /*
+ * We are called from an interrupt context with &port->slock
+ * being held. Drop it temporarily in order to prevent
+ * recursive locking.
+ */
+ spin_unlock(&port->slock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&port->slock);
}
-static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info)
+static void mxser_transmit_chars(struct mxser_port *port)
{
- struct serial_struct new_serial;
- unsigned int flags;
- int retval = 0;
-
- if (!new_info || !info->base)
- return -EFAULT;
- if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
- return -EFAULT;
+ int count, cnt;
- if ((new_serial.irq != info->irq) ||
- (new_serial.port != info->base) ||
- (new_serial.custom_divisor != info->custom_divisor) ||
- (new_serial.baud_base != info->baud_base))
- return -EPERM;
+ if (port->x_char) {
+ outb(port->x_char, port->ioaddr + UART_TX);
+ port->x_char = 0;
+ mxvar_log.txcnt[port->port.tty->index]++;
+ port->mon_data.txcnt++;
+ port->mon_data.up_txcnt++;
+ port->icount.tx++;
+ return;
+ }
- flags = info->flags & ASYNC_SPD_MASK;
+ if (port->port.xmit_buf == NULL)
+ return;
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- } else {
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->close_delay = new_serial.close_delay * HZ / 100;
- info->closing_wait = new_serial.closing_wait * HZ / 100;
- info->tty->low_latency =
- (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
- info->tty->low_latency = 0; /* (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; */
+ if ((port->xmit_cnt <= 0) || port->port.tty->stopped ||
+ (port->port.tty->hw_stopped &&
+ (port->type != PORT_16550A) &&
+ (!port->board->chip_flag))) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr + UART_IER);
+ return;
}
- /* added by casper, 3/17/2000, for mouse */
- info->type = new_serial.type;
+ cnt = port->xmit_cnt;
+ count = port->xmit_fifo_size;
+ do {
+ outb(port->port.xmit_buf[port->xmit_tail++],
+ port->ioaddr + UART_TX);
+ port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
+ if (--port->xmit_cnt <= 0)
+ break;
+ } while (--count > 0);
+ mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt);
- process_txrx_fifo(info);
+ port->mon_data.txcnt += (cnt - port->xmit_cnt);
+ port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
+ port->icount.tx += (cnt - port->xmit_cnt);
- if (info->flags & ASYNC_INITIALIZED) {
- if (flags != (info->flags & ASYNC_SPD_MASK)) {
- mxser_change_speed(info, NULL);
- }
- } else {
- retval = mxser_startup(info);
+ if (port->xmit_cnt < WAKEUP_CHARS)
+ tty_wakeup(port->port.tty);
+
+ if (port->xmit_cnt <= 0) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr + UART_IER);
}
- return retval;
}
/*
- * mxser_get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
+ * This is the serial driver's generic interrupt routine
*/
-static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value)
+static irqreturn_t mxser_interrupt(int irq, void *dev_id)
{
- unsigned char status;
- unsigned int result;
- unsigned long flags;
+ int status, iir, i;
+ struct mxser_board *brd = NULL;
+ struct mxser_port *port;
+ int max, irqbits, bits, msr;
+ unsigned int int_cnt, pass_counter = 0;
+ int handled = IRQ_NONE;
- spin_lock_irqsave(&info->slock, flags);
- status = inb(info->base + UART_LSR);
- spin_unlock_irqrestore(&info->slock, flags);
- result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
- return put_user(result, value);
-}
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (dev_id == &mxser_boards[i]) {
+ brd = dev_id;
+ break;
+ }
-/*
- * This routine sends a break character out the serial port.
- */
-static void mxser_send_break(struct mxser_struct *info, int duration)
-{
- unsigned long flags;
+ if (i == MXSER_BOARDS)
+ goto irq_stop;
+ if (brd == NULL)
+ goto irq_stop;
+ max = brd->info->nports;
+ while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
+ irqbits = inb(brd->vector) & brd->vector_mask;
+ if (irqbits == brd->vector_mask)
+ break;
- if (!info->base)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_lock_irqsave(&info->slock, flags);
- outb(inb(info->base + UART_LCR) | UART_LCR_SBC,
- info->base + UART_LCR);
- spin_unlock_irqrestore(&info->slock, flags);
- schedule_timeout(duration);
- spin_lock_irqsave(&info->slock, flags);
- outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC,
- info->base + UART_LCR);
- spin_unlock_irqrestore(&info->slock, flags);
-}
+ handled = IRQ_HANDLED;
+ for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
+ if (irqbits == brd->vector_mask)
+ break;
+ if (bits & irqbits)
+ continue;
+ port = &brd->ports[i];
+
+ int_cnt = 0;
+ spin_lock(&port->slock);
+ do {
+ iir = inb(port->ioaddr + UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ break;
+ iir &= MOXA_MUST_IIR_MASK;
+ if (!port->port.tty ||
+ (port->port.flags & ASYNC_CLOSING) ||
+ !(port->port.flags &
+ ASYNC_INITIALIZED)) {
+ status = inb(port->ioaddr + UART_LSR);
+ outb(0x27, port->ioaddr + UART_FCR);
+ inb(port->ioaddr + UART_MSR);
+ break;
+ }
-static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct mxser_struct *info = tty->driver_data;
- unsigned char control, status;
- unsigned long flags;
+ status = inb(port->ioaddr + UART_LSR);
+
+ if (status & UART_LSR_PE)
+ port->err_shadow |= NPPI_NOTIFY_PARITY;
+ if (status & UART_LSR_FE)
+ port->err_shadow |= NPPI_NOTIFY_FRAMING;
+ if (status & UART_LSR_OE)
+ port->err_shadow |=
+ NPPI_NOTIFY_HW_OVERRUN;
+ if (status & UART_LSR_BI)
+ port->err_shadow |= NPPI_NOTIFY_BREAK;
+
+ if (port->board->chip_flag) {
+ if (iir == MOXA_MUST_IIR_GDA ||
+ iir == MOXA_MUST_IIR_RDA ||
+ iir == MOXA_MUST_IIR_RTO ||
+ iir == MOXA_MUST_IIR_LSR)
+ mxser_receive_chars(port,
+ &status);
+ } else {
+ status &= port->read_status_mask;
+ if (status & UART_LSR_DR)
+ mxser_receive_chars(port,
+ &status);
+ }
+ msr = inb(port->ioaddr + UART_MSR);
+ if (msr & UART_MSR_ANY_DELTA)
+ mxser_check_modem_status(port, msr);
+
+ if (port->board->chip_flag) {
+ if (iir == 0x02 && (status &
+ UART_LSR_THRE))
+ mxser_transmit_chars(port);
+ } else {
+ if (status & UART_LSR_THRE)
+ mxser_transmit_chars(port);
+ }
+ } while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
+ spin_unlock(&port->slock);
+ }
+ }
- if (tty->index == MXSER_PORTS)
- return -ENOIOCTLCMD;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
+irq_stop:
+ return handled;
+}
+
+static const struct tty_operations mxser_ops = {
+ .open = mxser_open,
+ .close = mxser_close,
+ .write = mxser_write,
+ .put_char = mxser_put_char,
+ .flush_chars = mxser_flush_chars,
+ .write_room = mxser_write_room,
+ .chars_in_buffer = mxser_chars_in_buffer,
+ .flush_buffer = mxser_flush_buffer,
+ .ioctl = mxser_ioctl,
+ .throttle = mxser_throttle,
+ .unthrottle = mxser_unthrottle,
+ .set_termios = mxser_set_termios,
+ .stop = mxser_stop,
+ .start = mxser_start,
+ .hangup = mxser_hangup,
+ .break_ctl = mxser_rs_break,
+ .wait_until_sent = mxser_wait_until_sent,
+ .tiocmget = mxser_tiocmget,
+ .tiocmset = mxser_tiocmset,
+};
- control = info->MCR;
+/*
+ * The MOXA Smartio/Industio serial driver boot-time initialization code!
+ */
- spin_lock_irqsave(&info->slock, flags);
- status = inb(info->base + UART_MSR);
- if (status & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(info, status);
- spin_unlock_irqrestore(&info->slock, flags);
- return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
- ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
- ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
- ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
- ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
- ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
+ unsigned int irq)
+{
+ if (irq)
+ free_irq(brd->irq, brd);
+ if (pdev != NULL) { /* PCI */
+#ifdef CONFIG_PCI
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+#endif
+ } else {
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
+ }
}
-static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
+static int __devinit mxser_initbrd(struct mxser_board *brd,
+ struct pci_dev *pdev)
{
- struct mxser_struct *info = tty->driver_data;
- unsigned long flags;
+ struct mxser_port *info;
+ unsigned int i;
+ int retval;
+ printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
- if (tty->index == MXSER_PORTS)
- return -ENOIOCTLCMD;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
+ for (i = 0; i < brd->info->nports; i++) {
+ info = &brd->ports[i];
+ tty_port_init(&info->port);
+ info->board = brd;
+ info->stop_rx = 0;
+ info->ldisc_stop_rx = 0;
- spin_lock_irqsave(&info->slock, flags);
+ /* Enhance mode enabled here */
+ if (brd->chip_flag != MOXA_OTHER_UART)
+ mxser_enable_must_enchance_mode(info->ioaddr);
- if (set & TIOCM_RTS)
- info->MCR |= UART_MCR_RTS;
- if (set & TIOCM_DTR)
- info->MCR |= UART_MCR_DTR;
+ info->port.flags = ASYNC_SHARE_IRQ;
+ info->type = brd->uart_type;
- if (clear & TIOCM_RTS)
- info->MCR &= ~UART_MCR_RTS;
- if (clear & TIOCM_DTR)
- info->MCR &= ~UART_MCR_DTR;
+ process_txrx_fifo(info);
- outb(info->MCR, info->base + UART_MCR);
- spin_unlock_irqrestore(&info->slock, flags);
- return 0;
-}
+ info->custom_divisor = info->baud_base * 16;
+ info->port.close_delay = 5 * HZ / 10;
+ info->port.closing_wait = 30 * HZ;
+ info->normal_termios = mxvar_sdriver->init_termios;
+ init_waitqueue_head(&info->delta_msr_wait);
+ memset(&info->mon_data, 0, sizeof(struct mxser_mon));
+ info->err_shadow = 0;
+ spin_lock_init(&info->slock);
+ /* before set INT ISR, disable all int */
+ outb(inb(info->ioaddr + UART_IER) & 0xf0,
+ info->ioaddr + UART_IER);
+ }
-static int mxser_read_register(int, unsigned short *);
-static int mxser_program_mode(int);
-static void mxser_normal_mode(int);
+ retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
+ brd);
+ if (retval) {
+ printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
+ "conflict with another device.\n",
+ brd->info->name, brd->irq);
+ /* We hold resources, we need to release them. */
+ mxser_release_res(brd, pdev, 0);
+ }
+ return retval;
+}
-static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf)
+static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
{
int id, i, bits;
unsigned short regs[16], irq;
unsigned char scratch, scratch2;
- hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART;
+ brd->chip_flag = MOXA_OTHER_UART;
id = mxser_read_register(cap, regs);
- if (id == C168_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_C168_ISA;
- hwconf->ports = 8;
- } else if (id == C104_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_C104_ISA;
- hwconf->ports = 4;
- } else if (id == C102_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_C102_ISA;
- hwconf->ports = 2;
- } else if (id == CI132_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_CI132;
- hwconf->ports = 2;
- } else if (id == CI134_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_CI134;
- hwconf->ports = 4;
- } else if (id == CI104J_ASIC_ID) {
- hwconf->board_type = MXSER_BOARD_CI104J;
- hwconf->ports = 4;
- } else
+ switch (id) {
+ case C168_ASIC_ID:
+ brd->info = &mxser_cards[0];
+ break;
+ case C104_ASIC_ID:
+ brd->info = &mxser_cards[1];
+ break;
+ case CI104J_ASIC_ID:
+ brd->info = &mxser_cards[2];
+ break;
+ case C102_ASIC_ID:
+ brd->info = &mxser_cards[5];
+ break;
+ case CI132_ASIC_ID:
+ brd->info = &mxser_cards[6];
+ break;
+ case CI134_ASIC_ID:
+ brd->info = &mxser_cards[7];
+ break;
+ default:
return 0;
+ }
irq = 0;
- if (hwconf->ports == 2) {
+ /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
+ Flag-hack checks if configuration should be read as 2-port here. */
+ if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
if (irq != (regs[9] & 0xFF00))
return MXSER_ERR_IRQ_CONFLIT;
- } else if (hwconf->ports == 4) {
+ } else if (brd->info->nports == 4) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if (irq != regs[9])
return MXSER_ERR_IRQ_CONFLIT;
- } else if (hwconf->ports == 8) {
+ } else if (brd->info->nports == 8) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if (!irq)
return MXSER_ERR_IRQ;
- hwconf->irq = ((int)(irq & 0xF000) >> 12);
+ brd->irq = ((int)(irq & 0xF000) >> 12);
for (i = 0; i < 8; i++)
- hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8;
+ brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
if ((regs[12] & 0x80) == 0)
return MXSER_ERR_VECTOR;
- hwconf->vector = (int)regs[11]; /* interrupt vector */
+ brd->vector = (int)regs[11]; /* interrupt vector */
if (id == 1)
- hwconf->vector_mask = 0x00FF;
+ brd->vector_mask = 0x00FF;
else
- hwconf->vector_mask = 0x000F;
+ brd->vector_mask = 0x000F;
for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
if (regs[12] & bits) {
- hwconf->baud_base[i] = 921600;
- hwconf->MaxCanSetBaudRate[i] = 921600; /* add by Victor Yu. 09-04-2002 */
+ brd->ports[i].baud_base = 921600;
+ brd->ports[i].max_baud = 921600;
} else {
- hwconf->baud_base[i] = 115200;
- hwconf->MaxCanSetBaudRate[i] = 115200; /* add by Victor Yu. 09-04-2002 */
+ brd->ports[i].baud_base = 115200;
+ brd->ports[i].max_baud = 115200;
}
}
scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
scratch = inb(cap + UART_IIR);
if (scratch & 0xC0)
- hwconf->uart_type = PORT_16550A;
+ brd->uart_type = PORT_16550A;
else
- hwconf->uart_type = PORT_16450;
- if (id == 1)
- hwconf->ports = 8;
- else
- hwconf->ports = 4;
- request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)");
- request_region(hwconf->vector, 1, "mxser(vector)");
- return hwconf->ports;
+ brd->uart_type = PORT_16450;
+ if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
+ "mxser(IO)"))
+ return MXSER_ERR_IOADDR;
+ if (!request_region(brd->vector, 1, "mxser(vector)")) {
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ return MXSER_ERR_VECTOR;
+ }
+ return brd->info->nports;
}
-#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
-#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
-#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
-#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
-#define EN_CCMD 0x000 /* Chip's command register */
-#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
-#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
-#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
-#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
-#define EN0_DCFG 0x00E /* Data configuration reg WR */
-#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
-#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
-#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
-static int mxser_read_register(int port, unsigned short *regs)
+static int __devinit mxser_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- int i, k, value, id;
- unsigned int j;
+#ifdef CONFIG_PCI
+ struct mxser_board *brd;
+ unsigned int i, j;
+ unsigned long ioaddress;
+ int retval = -EINVAL;
- id = mxser_program_mode(port);
- if (id < 0)
- return id;
- for (i = 0; i < 14; i++) {
- k = (i & 0x3F) | 0x180;
- for (j = 0x100; j > 0; j >>= 1) {
- outb(CHIP_CS, port);
- if (k & j) {
- outb(CHIP_CS | CHIP_DO, port);
- outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
- } else {
- outb(CHIP_CS, port);
- outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (mxser_boards[i].info == NULL)
+ break;
+
+ if (i >= MXSER_BOARDS) {
+ printk(KERN_ERR "Too many Smartio/Industio family boards found "
+ "(maximum %d), board not configured\n", MXSER_BOARDS);
+ goto err;
+ }
+
+ brd = &mxser_boards[i];
+ brd->idx = i * MXSER_PORTS_PER_BOARD;
+ printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+ mxser_cards[ent->driver_data].name,
+ pdev->bus->number, PCI_SLOT(pdev->devfn));
+
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+ goto err;
+ }
+
+ /* io address */
+ ioaddress = pci_resource_start(pdev, 2);
+ retval = pci_request_region(pdev, 2, "mxser(IO)");
+ if (retval)
+ goto err;
+
+ brd->info = &mxser_cards[ent->driver_data];
+ for (i = 0; i < brd->info->nports; i++)
+ brd->ports[i].ioaddr = ioaddress + 8 * i;
+
+ /* vector */
+ ioaddress = pci_resource_start(pdev, 3);
+ retval = pci_request_region(pdev, 3, "mxser(vector)");
+ if (retval)
+ goto err_relio;
+ brd->vector = ioaddress;
+
+ /* irq */
+ brd->irq = pdev->irq;
+
+ brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
+ brd->uart_type = PORT_16550A;
+ brd->vector_mask = 0;
+
+ for (i = 0; i < brd->info->nports; i++) {
+ for (j = 0; j < UART_INFO_NUM; j++) {
+ if (Gpci_uart_info[j].type == brd->chip_flag) {
+ brd->ports[i].max_baud =
+ Gpci_uart_info[j].max_baud;
+
+ /* exception....CP-102 */
+ if (brd->info->flags & MXSER_HIGHBAUD)
+ brd->ports[i].max_baud = 921600;
+ break;
}
}
- (void)inb(port);
- value = 0;
- for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
- outb(CHIP_CS, port);
- outb(CHIP_CS | CHIP_SK, port);
- if (inb(port) & CHIP_DI)
- value |= j;
+ }
+
+ if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
+ for (i = 0; i < brd->info->nports; i++) {
+ if (i < 4)
+ brd->ports[i].opmode_ioaddr = ioaddress + 4;
+ else
+ brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
}
- regs[i] = value;
- outb(0, port);
+ outb(0, ioaddress + 4); /* default set to RS232 mode */
+ outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
}
- mxser_normal_mode(port);
- return id;
+
+ for (i = 0; i < brd->info->nports; i++) {
+ brd->vector_mask |= (1 << i);
+ brd->ports[i].baud_base = 921600;
+ }
+
+ /* mxser_initbrd will hook ISR. */
+ retval = mxser_initbrd(brd, pdev);
+ if (retval)
+ goto err_null;
+
+ for (i = 0; i < brd->info->nports; i++)
+ tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+
+ pci_set_drvdata(pdev, brd);
+
+ return 0;
+err_relio:
+ pci_release_region(pdev, 2);
+err_null:
+ brd->info = NULL;
+err:
+ return retval;
+#else
+ return -ENODEV;
+#endif
}
-static int mxser_program_mode(int port)
+static void __devexit mxser_remove(struct pci_dev *pdev)
{
- int id, i, j, n;
- /* unsigned long flags; */
+ struct mxser_board *brd = pci_get_drvdata(pdev);
+ unsigned int i;
- spin_lock(&gm_lock);
- outb(0, port);
- outb(0, port);
- outb(0, port);
- (void)inb(port);
- (void)inb(port);
- outb(0, port);
- (void)inb(port);
- /* restore_flags(flags); */
- spin_unlock(&gm_lock);
+ for (i = 0; i < brd->info->nports; i++)
+ tty_unregister_device(mxvar_sdriver, brd->idx + i);
- id = inb(port + 1) & 0x1F;
- if ((id != C168_ASIC_ID) &&
- (id != C104_ASIC_ID) &&
- (id != C102_ASIC_ID) &&
- (id != CI132_ASIC_ID) &&
- (id != CI134_ASIC_ID) &&
- (id != CI104J_ASIC_ID))
- return -1;
- for (i = 0, j = 0; i < 4; i++) {
- n = inb(port + 2);
- if (n == 'M') {
- j = 1;
- } else if ((j == 1) && (n == 1)) {
- j = 2;
- break;
- } else
- j = 0;
- }
- if (j != 2)
- id = -2;
- return id;
+ mxser_release_res(brd, pdev, 1);
+ brd->info = NULL;
}
-static void mxser_normal_mode(int port)
+static struct pci_driver mxser_driver = {
+ .name = "mxser",
+ .id_table = mxser_pcibrds,
+ .probe = mxser_probe,
+ .remove = __devexit_p(mxser_remove)
+};
+
+static int __init mxser_module_init(void)
{
- int i, n;
+ struct mxser_board *brd;
+ unsigned long cap;
+ unsigned int i, m, isaloop;
+ int retval, b;
- outb(0xA5, port + 1);
- outb(0x80, port + 3);
- outb(12, port + 0); /* 9600 bps */
- outb(0, port + 1);
- outb(0x03, port + 3); /* 8 data bits */
- outb(0x13, port + 4); /* loop back mode */
- for (i = 0; i < 16; i++) {
- n = inb(port + 5);
- if ((n & 0x61) == 0x60)
- break;
- if ((n & 1) == 1)
- (void)inb(port);
+ pr_debug("Loading module mxser ...\n");
+
+ mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
+ if (!mxvar_sdriver)
+ return -ENOMEM;
+
+ printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
+ MXSER_VERSION);
+
+ /* Initialize the tty_driver structure */
+ mxvar_sdriver->owner = THIS_MODULE;
+ mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
+ mxvar_sdriver->name = "ttyMI";
+ mxvar_sdriver->major = ttymajor;
+ mxvar_sdriver->minor_start = 0;
+ mxvar_sdriver->num = MXSER_PORTS + 1;
+ mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
+ mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
+ mxvar_sdriver->init_termios = tty_std_termios;
+ mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
+ mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(mxvar_sdriver, &mxser_ops);
+
+ retval = tty_register_driver(mxvar_sdriver);
+ if (retval) {
+ printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
+ "tty driver !\n");
+ goto err_put;
}
- outb(0x00, port + 4);
+
+ mxvar_diagflag = 0;
+
+ m = 0;
+ /* Start finding ISA boards here */
+ for (isaloop = 0; isaloop < 2; isaloop++)
+ for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
+ if (!isaloop)
+ cap = mxserBoardCAP[b]; /* predefined */
+ else
+ cap = ioaddr[b]; /* module param */
+
+ if (!cap)
+ continue;
+
+ brd = &mxser_boards[m];
+ retval = mxser_get_ISA_conf(cap, brd);
+
+ if (retval != 0)
+ printk(KERN_INFO "Found MOXA %s board "
+ "(CAP=0x%x)\n",
+ brd->info->name, ioaddr[b]);
+
+ if (retval <= 0) {
+ if (retval == MXSER_ERR_IRQ)
+ printk(KERN_ERR "Invalid interrupt "
+ "number, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_IRQ_CONFLIT)
+ printk(KERN_ERR "Invalid interrupt "
+ "number, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_VECTOR)
+ printk(KERN_ERR "Invalid interrupt "
+ "vector, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_IOADDR)
+ printk(KERN_ERR "Invalid I/O address, "
+ "board not configured\n");
+
+ brd->info = NULL;
+ continue;
+ }
+
+ /* mxser_initbrd will hook ISR. */
+ if (mxser_initbrd(brd, NULL) < 0) {
+ brd->info = NULL;
+ continue;
+ }
+
+ brd->idx = m * MXSER_PORTS_PER_BOARD;
+ for (i = 0; i < brd->info->nports; i++)
+ tty_register_device(mxvar_sdriver, brd->idx + i,
+ NULL);
+
+ m++;
+ }
+
+ retval = pci_register_driver(&mxser_driver);
+ if (retval) {
+ printk(KERN_ERR "Can't register pci driver\n");
+ if (!m) {
+ retval = -ENODEV;
+ goto err_unr;
+ } /* else: we have some ISA cards under control */
+ }
+
+ pr_debug("Done.\n");
+
+ return 0;
+err_unr:
+ tty_unregister_driver(mxvar_sdriver);
+err_put:
+ put_tty_driver(mxvar_sdriver);
+ return retval;
+}
+
+static void __exit mxser_module_exit(void)
+{
+ unsigned int i, j;
+
+ pr_debug("Unloading module mxser ...\n");
+
+ pci_unregister_driver(&mxser_driver);
+
+ for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
+ if (mxser_boards[i].info != NULL)
+ for (j = 0; j < mxser_boards[i].info->nports; j++)
+ tty_unregister_device(mxvar_sdriver,
+ mxser_boards[i].idx + j);
+ tty_unregister_driver(mxvar_sdriver);
+ put_tty_driver(mxvar_sdriver);
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (mxser_boards[i].info != NULL)
+ mxser_release_res(&mxser_boards[i], NULL, 1);
+
+ pr_debug("Done.\n");
}
module_init(mxser_module_init);