#define CCLKG_BURST_POLICY 0x368
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
-#define UTMIPLL_HW_PWRDN_CFG0 0x52c
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
-#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
-#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
-
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
};
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u8 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x04,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
static struct clk **clks;
-static void tegra124_utmi_param_configure(void __iomem *clk_base)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (osc_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
- osc_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
- active_delay_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
- enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
- xtal_freq_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- /* Setup HW control of UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- udelay(1);
-
- /* Setup SW override of UTMIPLL assuming USB2.0
- ports are assigned to USB2 */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(1);
-
- /* Enable HW control UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
static __init void tegra124_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
static void __init tegra124_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
- u32 val;
struct clk *clk;
/* PLLC */
clks[TEGRA124_CLK_PLL_M_UD] = clk;
/* PLLU */
- val = readl(clk_base + pll_u_params.base_reg);
- val &= ~BIT(24); /* disable PLLU_OVERRIDE */
- writel(val, clk_base + pll_u_params.base_reg);
-
- clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
- &pll_u_params, &pll_u_lock);
+ clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
+ &pll_u_params, &pll_u_lock);
clk_register_clkdev(clk, "pll_u", NULL);
clks[TEGRA124_CLK_PLL_U] = clk;
- tegra124_utmi_param_configure(clk_base);
-
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
projects / linux-beck.git / blobdiff