/*
* PL08X private data structures
* An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit,
- * start & end do not - their bus bit info is in cctl.
+ * start & end do not - their bus bit info is in cctl. Also note that these
+ * are fixed 32-bit quantities.
*/
-struct lli {
- dma_addr_t src;
- dma_addr_t dst;
- dma_addr_t next;
+struct pl08x_lli {
+ u32 src;
+ u32 dst;
+ u32 lli;
u32 cctl;
};
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
struct pl08x_driver_data {
struct dma_device memcpy;
void __iomem *base;
struct amba_device *adev;
- struct vendor_data *vd;
+ const struct vendor_data *vd;
struct pl08x_platform_data *pd;
struct pl08x_phy_chan *phy_chans;
struct dma_pool *pool;
int pool_ctr;
+ u8 lli_buses;
+ u8 mem_buses;
spinlock_t lock;
};
/* Maximum times we call dma_pool_alloc on this pool without freeing */
#define PL08X_MAX_ALLOCS 0x40
-#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli))
+#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
#define PL08X_ALIGN 8
static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
/*
* Set the initial DMA register values i.e. those for the first LLI
* The next LLI pointer and the configuration interrupt bit have
- * been set when the LLIs were constructed
+ * been set when the LLIs were constructed. Poke them into the hardware
+ * and start the transfer.
*/
-static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
- struct pl08x_phy_chan *ch)
+static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
+ struct pl08x_txd *txd)
{
- /* Wait for channel inactive */
- while (pl08x_phy_channel_busy(ch))
- ;
-
- dev_vdbg(&pl08x->adev->dev,
- "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
- "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n",
- ch->id,
- ch->csrc,
- ch->cdst,
- ch->cctl,
- ch->clli,
- ch->ccfg);
-
- writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR);
- writel(ch->cdst, ch->base + PL080_CH_DST_ADDR);
- writel(ch->clli, ch->base + PL080_CH_LLI);
- writel(ch->cctl, ch->base + PL080_CH_CONTROL);
- writel(ch->ccfg, ch->base + PL080_CH_CONFIG);
-}
-
-static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
-{
- struct pl08x_channel_data *cd = plchan->cd;
+ struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *phychan = plchan->phychan;
- struct pl08x_txd *txd = plchan->at;
-
- /* Copy the basic control register calculated at transfer config */
- phychan->csrc = txd->csrc;
- phychan->cdst = txd->cdst;
- phychan->clli = txd->clli;
- phychan->cctl = txd->cctl;
-
- /* Assign the signal to the proper control registers */
- phychan->ccfg = cd->ccfg;
- phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK;
- phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK;
- /* If it wasn't set from AMBA, ignore it */
- if (txd->direction == DMA_TO_DEVICE)
- /* Select signal as destination */
- phychan->ccfg |=
- (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT);
- else if (txd->direction == DMA_FROM_DEVICE)
- /* Select signal as source */
- phychan->ccfg |=
- (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT);
- /* Always enable error interrupts */
- phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK;
- /* Always enable terminal interrupts */
- phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK;
-}
-
-/*
- * Enable the DMA channel
- * Assumes all other configuration bits have been set
- * as desired before this code is called
- */
-static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x,
- struct pl08x_phy_chan *ch)
-{
+ struct pl08x_lli *lli = &txd->llis_va[0];
u32 val;
- /*
- * Do not access config register until channel shows as disabled
- */
- while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id))
- ;
+ plchan->at = txd;
- /*
- * Do not access config register until channel shows as inactive
- */
- val = readl(ch->base + PL080_CH_CONFIG);
+ /* Wait for channel inactive */
+ while (pl08x_phy_channel_busy(phychan))
+ cpu_relax();
+
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
+ txd->ccfg);
+
+ writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
+ writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
+ writel(lli->lli, phychan->base + PL080_CH_LLI);
+ writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
+ writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
+
+ /* Enable the DMA channel */
+ /* Do not access config register until channel shows as disabled */
+ while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+ cpu_relax();
+
+ /* Do not access config register until channel shows as inactive */
+ val = readl(phychan->base + PL080_CH_CONFIG);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(phychan->base + PL080_CH_CONFIG);
- writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG);
+ writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
}
/*
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(ch))
- ;
+ cpu_relax();
}
static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
{
struct pl08x_phy_chan *ch;
- struct pl08x_txd *txdi = NULL;
struct pl08x_txd *txd;
unsigned long flags;
- u32 bytes = 0;
+ size_t bytes = 0;
spin_lock_irqsave(&plchan->lock, flags);
-
ch = plchan->phychan;
txd = plchan->at;
/*
- * Next follow the LLIs to get the number of pending bytes in the
- * currently active transaction.
+ * Follow the LLIs to get the number of remaining
+ * bytes in the currently active transaction.
*/
if (ch && txd) {
- struct lli *llis_va = txd->llis_va;
- struct lli *llis_bus = (struct lli *) txd->llis_bus;
- u32 clli = readl(ch->base + PL080_CH_LLI);
+ u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
- /* First get the bytes in the current active LLI */
+ /* First get the remaining bytes in the active transfer */
bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
if (clli) {
- int i = 0;
+ struct pl08x_lli *llis_va = txd->llis_va;
+ dma_addr_t llis_bus = txd->llis_bus;
+ int index;
- /* Forward to the LLI pointed to by clli */
- while ((clli != (u32) &(llis_bus[i])) &&
- (i < MAX_NUM_TSFR_LLIS))
- i++;
+ BUG_ON(clli < llis_bus || clli >= llis_bus +
+ sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
+
+ /*
+ * Locate the next LLI - as this is an array,
+ * it's simple maths to find.
+ */
+ index = (clli - llis_bus) / sizeof(struct pl08x_lli);
+
+ for (; index < MAX_NUM_TSFR_LLIS; index++) {
+ bytes += get_bytes_in_cctl(llis_va[index].cctl);
- while (clli) {
- bytes += get_bytes_in_cctl(llis_va[i].cctl);
/*
* A LLI pointer of 0 terminates the LLI list
*/
- clli = llis_va[i].next;
- i++;
+ if (!llis_va[index].lli)
+ break;
}
}
}
/* Sum up all queued transactions */
if (!list_empty(&plchan->desc_list)) {
+ struct pl08x_txd *txdi;
list_for_each_entry(txdi, &plchan->desc_list, node) {
bytes += txdi->len;
}
-
}
spin_unlock_irqrestore(&plchan->lock, flags);
}
static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
- u32 tsize)
+ size_t tsize)
{
u32 retbits = cctl;
* Fills in one LLI for a certain transfer descriptor
* and advance the counter
*/
-static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
- struct pl08x_txd *txd, int num_llis, int len,
- u32 cctl, u32 *remainder)
+static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+ struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder)
{
- struct lli *llis_va = txd->llis_va;
- struct lli *llis_bus = (struct lli *) txd->llis_bus;
+ struct pl08x_lli *llis_va = txd->llis_va;
+ dma_addr_t llis_bus = txd->llis_bus;
BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
- llis_va[num_llis].cctl = cctl;
- llis_va[num_llis].src = txd->srcbus.addr;
- llis_va[num_llis].dst = txd->dstbus.addr;
-
- /*
- * On versions with dual masters, you can optionally AND on
- * PL080_LLI_LM_AHB2 to the LLI to tell the hardware to read
- * in new LLIs with that controller, but we always try to
- * choose AHB1 to point into memory. The idea is to have AHB2
- * fixed on the peripheral and AHB1 messing around in the
- * memory. So we don't manipulate this bit currently.
- */
-
- llis_va[num_llis].next =
- (dma_addr_t)((u32) &(llis_bus[num_llis + 1]));
+ llis_va[num_llis].cctl = cctl;
+ llis_va[num_llis].src = txd->srcbus.addr;
+ llis_va[num_llis].dst = txd->dstbus.addr;
+ llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+ if (pl08x->lli_buses & PL08X_AHB2)
+ llis_va[num_llis].lli |= PL080_LLI_LM_AHB2;
if (cctl & PL080_CONTROL_SRC_INCR)
txd->srcbus.addr += len;
if (cctl & PL080_CONTROL_DST_INCR)
txd->dstbus.addr += len;
- *remainder -= len;
+ BUG_ON(*remainder < len);
- return num_llis + 1;
+ *remainder -= len;
}
/*
* Return number of bytes to fill to boundary, or len
*/
-static inline u32 pl08x_pre_boundary(u32 addr, u32 len)
+static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
{
u32 boundary;
static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
- struct pl08x_channel_data *cd = txd->cd;
struct pl08x_bus_data *mbus, *sbus;
- u32 remainder;
+ size_t remainder;
int num_llis = 0;
u32 cctl;
- int max_bytes_per_lli;
- int total_bytes = 0;
- struct lli *llis_va;
- struct lli *llis_bus;
+ size_t max_bytes_per_lli;
+ size_t total_bytes = 0;
+ struct pl08x_lli *llis_va;
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
&txd->llis_bus);
pl08x->pool_ctr++;
- /*
- * Initialize bus values for this transfer
- * from the passed optimal values
- */
- if (!cd) {
- dev_err(&pl08x->adev->dev, "%s no channel data\n", __func__);
- return 0;
- }
-
- /* Get the default CCTL from the platform data */
- cctl = cd->cctl;
-
- /*
- * On the PL080 we have two bus masters and we
- * should select one for source and one for
- * destination. We try to use AHB2 for the
- * bus which does not increment (typically the
- * peripheral) else we just choose something.
- */
- cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
- if (pl08x->vd->dualmaster) {
- if (cctl & PL080_CONTROL_SRC_INCR)
- /* Source increments, use AHB2 for destination */
- cctl |= PL080_CONTROL_DST_AHB2;
- else if (cctl & PL080_CONTROL_DST_INCR)
- /* Destination increments, use AHB2 for source */
- cctl |= PL080_CONTROL_SRC_AHB2;
- else
- /* Just pick something, source AHB1 dest AHB2 */
- cctl |= PL080_CONTROL_DST_AHB2;
- }
+ /* Get the default CCTL */
+ cctl = txd->cctl;
/* Find maximum width of the source bus */
txd->srcbus.maxwidth =
max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) *
PL080_CONTROL_TRANSFER_SIZE_MASK;
dev_vdbg(&pl08x->adev->dev,
- "%s max bytes per lli = %d\n",
+ "%s max bytes per lli = %zu\n",
__func__, max_bytes_per_lli);
/* We need to count this down to zero */
remainder = txd->len;
dev_vdbg(&pl08x->adev->dev,
- "%s remainder = %d\n",
+ "%s remainder = %zu\n",
__func__, remainder);
/*
pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus,
&mbus, &sbus, cctl);
-
- /*
- * The lowest bit of the LLI register
- * is also used to indicate which master to
- * use for reading the LLIs.
- */
-
if (txd->len < mbus->buswidth) {
/*
* Less than a bus width available
"less than a bus width (remain 0x%08x)\n",
__func__, remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- num_llis =
- pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1,
+ pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
cctl, &remainder);
total_bytes++;
}
"(remain 0x%08x)\n",
__func__, remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- num_llis = pl08x_fill_lli_for_desc
- (pl08x, txd, num_llis, 1, cctl, &remainder);
+ pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
+ cctl, &remainder);
total_bytes++;
}
* width left
*/
while (remainder > (mbus->buswidth - 1)) {
- int lli_len, target_len;
- int tsize;
- int odd_bytes;
+ size_t lli_len, target_len, tsize, odd_bytes;
/*
* If enough left try to send max possible,
if (lli_len <= 0) {
dev_err(&pl08x->adev->dev,
- "%s lli_len is %d, <= 0\n",
+ "%s lli_len is %zu, <= 0\n",
__func__, lli_len);
return 0;
}
if (target_len != lli_len) {
dev_vdbg(&pl08x->adev->dev,
- "%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n",
+ "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
__func__, target_len, lli_len, txd->len);
}
tsize);
dev_vdbg(&pl08x->adev->dev,
- "%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n",
+ "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, remainder);
- num_llis = pl08x_fill_lli_for_desc(pl08x, txd,
- num_llis, lli_len, cctl,
- &remainder);
+ pl08x_fill_lli_for_desc(pl08x, txd, num_llis++,
+ lli_len, cctl, &remainder);
total_bytes += lli_len;
}
&& (remainder); j++) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single byte (remain 0x%08x)\n",
+ "%s align with boundary, single byte (remain 0x%08zx)\n",
__func__, remainder);
- num_llis =
- pl08x_fill_lli_for_desc(pl08x,
- txd, num_llis, 1,
- cctl, &remainder);
+ pl08x_fill_lli_for_desc(pl08x, txd,
+ num_llis++, 1, cctl,
+ &remainder);
total_bytes++;
}
}
/*
* Send any odd bytes
*/
- if (remainder < 0) {
- dev_err(&pl08x->adev->dev, "%s remainder not fitted 0x%08x bytes\n",
- __func__, remainder);
- return 0;
- }
-
while (remainder) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single odd byte (remain %d)\n",
+ "%s align with boundary, single odd byte (remain %zu)\n",
__func__, remainder);
- num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis,
- 1, cctl, &remainder);
+ pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
+ cctl, &remainder);
total_bytes++;
}
}
if (total_bytes != txd->len) {
dev_err(&pl08x->adev->dev,
- "%s size of encoded lli:s don't match total txd, transferred 0x%08x from size 0x%08x\n",
+ "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
__func__, total_bytes, txd->len);
return 0;
}
__func__, (u32) MAX_NUM_TSFR_LLIS);
return 0;
}
+
+ llis_va = txd->llis_va;
/*
- * Decide whether this is a loop or a terminated transfer
+ * The final LLI terminates the LLI.
*/
- llis_va = txd->llis_va;
- llis_bus = (struct lli *) txd->llis_bus;
-
- if (cd->circular_buffer) {
- /*
- * Loop the circular buffer so that the next element
- * points back to the beginning of the LLI.
- */
- llis_va[num_llis - 1].next =
- (dma_addr_t)((unsigned int)&(llis_bus[0]));
- } else {
- /*
- * On non-circular buffers, the final LLI terminates
- * the LLI.
- */
- llis_va[num_llis - 1].next = 0;
- /*
- * The final LLI element shall also fire an interrupt
- */
- llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
- }
-
- /* Now store the channel register values */
- txd->csrc = llis_va[0].src;
- txd->cdst = llis_va[0].dst;
- if (num_llis > 1)
- txd->clli = llis_va[0].next;
- else
- txd->clli = 0;
-
- txd->cctl = llis_va[0].cctl;
- /* ccfg will be set at physical channel allocation time */
+ llis_va[num_llis - 1].lli = 0;
+ /*
+ * The final LLI element shall also fire an interrupt
+ */
+ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
#ifdef VERBOSE_DEBUG
{
llis_va[i].src,
llis_va[i].dst,
llis_va[i].cctl,
- llis_va[i].next
+ llis_va[i].lli
);
}
}
struct pl08x_txd *txd)
{
/* Free the LLI */
- dma_pool_free(pl08x->pool, txd->llis_va,
- txd->llis_bus);
+ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
pl08x->pool_ctr--;
return -EBUSY;
}
ch->signal = ret;
+
+ /* Assign the flow control signal to this channel */
+ if (txd->direction == DMA_TO_DEVICE)
+ txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
+ else if (txd->direction == DMA_FROM_DEVICE)
+ txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
}
dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
return 0;
}
+static void release_phy_channel(struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_driver_data *pl08x = plchan->host;
+
+ if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) {
+ pl08x->pd->put_signal(plchan);
+ plchan->phychan->signal = -1;
+ }
+ pl08x_put_phy_channel(pl08x, plchan->phychan);
+ plchan->phychan = NULL;
+}
+
static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan);
enum dma_slave_buswidth addr_width;
u32 maxburst;
u32 cctl = 0;
- /* Mask out all except src and dst channel */
- u32 ccfg = cd->ccfg & 0x000003DEU;
int i;
/* Transfer direction */
plchan->runtime_direction = config->direction;
if (config->direction == DMA_TO_DEVICE) {
plchan->runtime_addr = config->dst_addr;
- cctl |= PL080_CONTROL_SRC_INCR;
- ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
addr_width = config->dst_addr_width;
maxburst = config->dst_maxburst;
} else if (config->direction == DMA_FROM_DEVICE) {
plchan->runtime_addr = config->src_addr;
- cctl |= PL080_CONTROL_DST_INCR;
- ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
addr_width = config->src_addr_width;
maxburst = config->src_maxburst;
} else {
cctl |= burst_sizes[i].reg;
}
- /* Access the cell in privileged mode, non-bufferable, non-cacheable */
- cctl &= ~PL080_CONTROL_PROT_MASK;
- cctl |= PL080_CONTROL_PROT_SYS;
-
/* Modify the default channel data to fit PrimeCell request */
cd->cctl = cctl;
- cd->ccfg = ccfg;
dev_dbg(&pl08x->adev->dev,
"configured channel %s (%s) for %s, data width %d, "
- "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n",
+ "maxburst %d words, LE, CCTL=0x%08x\n",
dma_chan_name(chan), plchan->name,
(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
addr_width,
maxburst,
- cctl, ccfg);
+ cctl);
}
/*
static void pl08x_issue_pending(struct dma_chan *chan)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
- struct pl08x_driver_data *pl08x = plchan->host;
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
struct pl08x_txd,
node);
list_del(&next->node);
- plchan->at = next;
plchan->state = PL08X_CHAN_RUNNING;
- /* Configure the physical channel for the active txd */
- pl08x_config_phychan_for_txd(plchan);
- pl08x_set_cregs(pl08x, plchan->phychan);
- pl08x_enable_phy_chan(pl08x, plchan->phychan);
+ pl08x_start_txd(plchan, next);
}
spin_unlock_irqrestore(&plchan->lock, flags);
spin_lock_irqsave(&plchan->lock, plchan->lockflags);
- /*
- * If this device is not using a circular buffer then
- * queue this new descriptor for transfer.
- * The descriptor for a circular buffer continues
- * to be used until the channel is freed.
- */
- if (txd->cd->circular_buffer)
- dev_err(&pl08x->adev->dev,
- "%s attempting to queue a circular buffer\n",
- __func__);
- else
- list_add_tail(&txd->node,
- &plchan->desc_list);
+ list_add_tail(&txd->node, &plchan->desc_list);
/*
* See if we already have a physical channel allocated,
return 0;
}
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port. We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst)
+{
+ u32 cctl = 0;
+
+ if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+ cctl |= PL080_CONTROL_DST_AHB2;
+ if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+ cctl |= PL080_CONTROL_SRC_AHB2;
+
+ return cctl;
+}
+
+static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+
+ if (txd) {
+ dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
+ txd->tx.tx_submit = pl08x_tx_submit;
+ INIT_LIST_HEAD(&txd->node);
+
+ /* Always enable error and terminal interrupts */
+ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
+ PL080_CONFIG_TC_IRQ_MASK;
+ }
+ return txd;
+}
+
/*
* Initialize a descriptor to be used by memcpy submit
*/
struct pl08x_txd *txd;
int ret;
- txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ txd = pl08x_get_txd(plchan);
if (!txd) {
dev_err(&pl08x->adev->dev,
"%s no memory for descriptor\n", __func__);
return NULL;
}
- dma_async_tx_descriptor_init(&txd->tx, chan);
txd->direction = DMA_NONE;
txd->srcbus.addr = src;
txd->dstbus.addr = dest;
+ txd->len = len;
/* Set platform data for m2m */
- txd->cd = &pl08x->pd->memcpy_channel;
+ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl = pl08x->pd->memcpy_channel.cctl &
+ ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
+
/* Both to be incremented or the code will break */
- txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
- txd->tx.tx_submit = pl08x_tx_submit;
- txd->tx.callback = NULL;
- txd->tx.callback_param = NULL;
- txd->len = len;
+ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
+
+ if (pl08x->vd->dualmaster)
+ txd->cctl |= pl08x_select_bus(pl08x,
+ pl08x->mem_buses, pl08x->mem_buses);
- INIT_LIST_HEAD(&txd->node);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
+ u8 src_buses, dst_buses;
int ret;
/*
dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
__func__, sgl->length, plchan->name);
- txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ txd = pl08x_get_txd(plchan);
if (!txd) {
dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
return NULL;
}
- dma_async_tx_descriptor_init(&txd->tx, chan);
-
if (direction != plchan->runtime_direction)
dev_err(&pl08x->adev->dev, "%s DMA setup does not match "
"the direction configured for the PrimeCell\n",
* channel target address dynamically at runtime.
*/
txd->direction = direction;
+ txd->len = sgl->length;
+
+ txd->cctl = plchan->cd->cctl &
+ ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
+ PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
+ PL080_CONTROL_PROT_MASK);
+
+ /* Access the cell in privileged mode, non-bufferable, non-cacheable */
+ txd->cctl |= PL080_CONTROL_PROT_SYS;
+
if (direction == DMA_TO_DEVICE) {
+ txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl |= PL080_CONTROL_SRC_INCR;
txd->srcbus.addr = sgl->dma_address;
if (plchan->runtime_addr)
txd->dstbus.addr = plchan->runtime_addr;
else
txd->dstbus.addr = plchan->cd->addr;
+ src_buses = pl08x->mem_buses;
+ dst_buses = plchan->cd->periph_buses;
} else if (direction == DMA_FROM_DEVICE) {
+ txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl |= PL080_CONTROL_DST_INCR;
if (plchan->runtime_addr)
txd->srcbus.addr = plchan->runtime_addr;
else
txd->srcbus.addr = plchan->cd->addr;
txd->dstbus.addr = sgl->dma_address;
+ src_buses = plchan->cd->periph_buses;
+ dst_buses = pl08x->mem_buses;
} else {
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
- txd->cd = plchan->cd;
- txd->tx.tx_submit = pl08x_tx_submit;
- txd->tx.callback = NULL;
- txd->tx.callback_param = NULL;
- txd->len = sgl->length;
- INIT_LIST_HEAD(&txd->node);
+
+ txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
* Mark physical channel as free and free any slave
* signal
*/
- if ((plchan->phychan->signal >= 0) &&
- pl08x->pd->put_signal) {
- pl08x->pd->put_signal(plchan);
- plchan->phychan->signal = -1;
- }
- pl08x_put_phy_channel(pl08x, plchan->phychan);
- plchan->phychan = NULL;
+ release_phy_channel(plchan);
}
/* Dequeue jobs and free LLIs */
if (plchan->at) {
static void pl08x_tasklet(unsigned long data)
{
struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data;
- struct pl08x_phy_chan *phychan = plchan->phychan;
struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ dma_async_tx_callback callback = NULL;
+ void *callback_param = NULL;
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
- if (plchan->at) {
- dma_async_tx_callback callback =
- plchan->at->tx.callback;
- void *callback_param =
- plchan->at->tx.callback_param;
+ txd = plchan->at;
+ plchan->at = NULL;
- /*
- * Update last completed
- */
- plchan->lc = plchan->at->tx.cookie;
+ if (txd) {
+ callback = txd->tx.callback;
+ callback_param = txd->tx.callback_param;
/*
- * Callback to signal completion
+ * Update last completed
*/
- if (callback)
- callback(callback_param);
+ plchan->lc = txd->tx.cookie;
/*
- * Free the descriptor if it's not for a device
- * using a circular buffer
- */
- if (!plchan->at->cd->circular_buffer) {
- pl08x_free_txd(pl08x, plchan->at);
- plchan->at = NULL;
- }
- /*
- * else descriptor for circular
- * buffers only freed when
- * client has disabled dma
+ * Free the descriptor
*/
+ pl08x_free_txd(pl08x, txd);
}
/*
* If a new descriptor is queued, set it up
struct pl08x_txd,
node);
list_del(&next->node);
- plchan->at = next;
- /* Configure the physical channel for the next txd */
- pl08x_config_phychan_for_txd(plchan);
- pl08x_set_cregs(pl08x, plchan->phychan);
- pl08x_enable_phy_chan(pl08x, plchan->phychan);
+
+ pl08x_start_txd(plchan, next);
} else {
struct pl08x_dma_chan *waiting = NULL;
* No more jobs, so free up the physical channel
* Free any allocated signal on slave transfers too
*/
- if ((phychan->signal >= 0) && pl08x->pd->put_signal) {
- pl08x->pd->put_signal(plchan);
- phychan->signal = -1;
- }
- pl08x_put_phy_channel(pl08x, phychan);
- plchan->phychan = NULL;
+ release_phy_channel(plchan);
plchan->state = PL08X_CHAN_IDLE;
/*
}
spin_unlock_irqrestore(&plchan->lock, flags);
+
+ /* Callback to signal completion */
+ if (callback)
+ callback(callback_param);
}
static irqreturn_t pl08x_irq(int irq, void *dev)
return -ENOMEM;
}
}
+ if (chan->cd->circular_buffer) {
+ dev_err(&pl08x->adev->dev,
+ "channel %s: circular buffers not supported\n",
+ chan->name);
+ kfree(chan);
+ continue;
+ }
dev_info(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
- struct vendor_data *vd = id->data;
+ const struct vendor_data *vd = id->data;
int ret = 0;
int i;
pl08x->adev = adev;
pl08x->vd = vd;
+ /* By default, AHB1 only. If dualmaster, from platform */
+ pl08x->lli_buses = PL08X_AHB1;
+ pl08x->mem_buses = PL08X_AHB1;
+ if (pl08x->vd->dualmaster) {
+ pl08x->lli_buses = pl08x->pd->lli_buses;
+ pl08x->mem_buses = pl08x->pd->mem_buses;
+ }
+
/* A DMA memory pool for LLIs, align on 1-byte boundary */
pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);