}
EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
-static bool drm_kms_helper_poll = true;
-module_param_named(poll, drm_kms_helper_poll, bool, 0600);
-
-static void drm_mode_validate_flag(struct drm_connector *connector,
- int flags)
-{
- struct drm_display_mode *mode;
-
- if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE |
- DRM_MODE_FLAG_3D_MASK))
- return;
-
- list_for_each_entry(mode, &connector->modes, head) {
- if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
- !(flags & DRM_MODE_FLAG_INTERLACE))
- mode->status = MODE_NO_INTERLACE;
- if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
- !(flags & DRM_MODE_FLAG_DBLSCAN))
- mode->status = MODE_NO_DBLESCAN;
- if ((mode->flags & DRM_MODE_FLAG_3D_MASK) &&
- !(flags & DRM_MODE_FLAG_3D_MASK))
- mode->status = MODE_NO_STEREO;
- }
-
- return;
-}
-
-/**
- * drm_helper_probe_single_connector_modes - get complete set of display modes
- * @connector: connector to probe
- * @maxX: max width for modes
- * @maxY: max height for modes
- *
- * Based on the helper callbacks implemented by @connector try to detect all
- * valid modes. Modes will first be added to the connector's probed_modes list,
- * then culled (based on validity and the @maxX, @maxY parameters) and put into
- * the normal modes list.
- *
- * Intended to be use as a generic implementation of the ->fill_modes()
- * @connector vfunc for drivers that use the crtc helpers for output mode
- * filtering and detection.
- *
- * Returns:
- * The number of modes found on @connector.
- */
-int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
- uint32_t maxX, uint32_t maxY)
-{
- struct drm_device *dev = connector->dev;
- struct drm_display_mode *mode;
- struct drm_connector_helper_funcs *connector_funcs =
- connector->helper_private;
- int count = 0;
- int mode_flags = 0;
- bool verbose_prune = true;
-
- WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
- drm_get_connector_name(connector));
- /* set all modes to the unverified state */
- list_for_each_entry(mode, &connector->modes, head)
- mode->status = MODE_UNVERIFIED;
-
- if (connector->force) {
- if (connector->force == DRM_FORCE_ON)
- connector->status = connector_status_connected;
- else
- connector->status = connector_status_disconnected;
- if (connector->funcs->force)
- connector->funcs->force(connector);
- } else {
- connector->status = connector->funcs->detect(connector, true);
- }
-
- /* Re-enable polling in case the global poll config changed. */
- if (drm_kms_helper_poll != dev->mode_config.poll_running)
- drm_kms_helper_poll_enable(dev);
-
- dev->mode_config.poll_running = drm_kms_helper_poll;
-
- if (connector->status == connector_status_disconnected) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
- connector->base.id, drm_get_connector_name(connector));
- drm_mode_connector_update_edid_property(connector, NULL);
- verbose_prune = false;
- goto prune;
- }
-
-#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
- count = drm_load_edid_firmware(connector);
- if (count == 0)
-#endif
- count = (*connector_funcs->get_modes)(connector);
-
- if (count == 0 && connector->status == connector_status_connected)
- count = drm_add_modes_noedid(connector, 1024, 768);
- if (count == 0)
- goto prune;
-
- drm_mode_connector_list_update(connector);
-
- if (maxX && maxY)
- drm_mode_validate_size(dev, &connector->modes, maxX, maxY);
-
- if (connector->interlace_allowed)
- mode_flags |= DRM_MODE_FLAG_INTERLACE;
- if (connector->doublescan_allowed)
- mode_flags |= DRM_MODE_FLAG_DBLSCAN;
- if (connector->stereo_allowed)
- mode_flags |= DRM_MODE_FLAG_3D_MASK;
- drm_mode_validate_flag(connector, mode_flags);
-
- list_for_each_entry(mode, &connector->modes, head) {
- if (mode->status == MODE_OK)
- mode->status = connector_funcs->mode_valid(connector,
- mode);
- }
-
-prune:
- drm_mode_prune_invalid(dev, &connector->modes, verbose_prune);
-
- if (list_empty(&connector->modes))
- return 0;
-
- list_for_each_entry(mode, &connector->modes, head)
- mode->vrefresh = drm_mode_vrefresh(mode);
-
- drm_mode_sort(&connector->modes);
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
- drm_get_connector_name(connector));
- list_for_each_entry(mode, &connector->modes, head) {
- drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
- drm_mode_debug_printmodeline(mode);
- }
-
- return count;
-}
-EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
-
/**
* drm_helper_encoder_in_use - check if a given encoder is in use
* @encoder: encoder to check
encoder->bridge->funcs->post_disable(encoder->bridge);
}
-/**
- * drm_helper_disable_unused_functions - disable unused objects
- * @dev: DRM device
- *
- * This function walks through the entire mode setting configuration of @dev. It
- * will remove any crtc links of unused encoders and encoder links of
- * disconnected connectors. Then it will disable all unused encoders and crtcs
- * either by calling their disable callback if available or by calling their
- * dpms callback with DRM_MODE_DPMS_OFF.
- */
-void drm_helper_disable_unused_functions(struct drm_device *dev)
+static void __drm_helper_disable_unused_functions(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct drm_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
continue;
- if (connector->status == connector_status_disconnected)
- connector->encoder = NULL;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
(*crtc_funcs->disable)(crtc);
else
(*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
- crtc->fb = NULL;
+ crtc->primary->fb = NULL;
}
}
}
+
+/**
+ * drm_helper_disable_unused_functions - disable unused objects
+ * @dev: DRM device
+ *
+ * This function walks through the entire mode setting configuration of @dev. It
+ * will remove any crtc links of unused encoders and encoder links of
+ * disconnected connectors. Then it will disable all unused encoders and crtcs
+ * either by calling their disable callback if available or by calling their
+ * dpms callback with DRM_MODE_DPMS_OFF.
+ */
+void drm_helper_disable_unused_functions(struct drm_device *dev)
+{
+ drm_modeset_lock_all(dev);
+ __drm_helper_disable_unused_functions(dev);
+ drm_modeset_unlock_all(dev);
+}
EXPORT_SYMBOL(drm_helper_disable_unused_functions);
/*
}
}
- drm_helper_disable_unused_functions(dev);
+ __drm_helper_disable_unused_functions(dev);
return 0;
}
* @set: mode set configuration
*
* Setup a new configuration, provided by the upper layers (either an ioctl call
- * from userspace or internally e.g. from the fbdev suppport code) in @set, and
+ * from userspace or internally e.g. from the fbdev support code) in @set, and
* enable it. This is the main helper functions for drivers that implement
* kernel mode setting with the crtc helper functions and the assorted
* ->prepare(), ->modeset() and ->commit() helper callbacks.
save_set.mode = &set->crtc->mode;
save_set.x = set->crtc->x;
save_set.y = set->crtc->y;
- save_set.fb = set->crtc->fb;
+ save_set.fb = set->crtc->primary->fb;
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
- if (set->crtc->fb != set->fb) {
+ if (set->crtc->primary->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
- if (set->crtc->fb == NULL) {
+ if (set->crtc->primary->fb == NULL) {
DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
mode_changed = true;
} else if (set->fb == NULL) {
mode_changed = true;
} else if (set->fb->pixel_format !=
- set->crtc->fb->pixel_format) {
+ set->crtc->primary->fb->pixel_format) {
mode_changed = true;
} else
fb_changed = true;
if (new_encoder == NULL)
/* don't break so fail path works correct */
fail = 1;
- break;
if (connector->dpms != DRM_MODE_DPMS_ON) {
DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
mode_changed = true;
}
+
+ break;
}
}
DRM_DEBUG_KMS("attempting to set mode from"
" userspace\n");
drm_mode_debug_printmodeline(set->mode);
- set->crtc->fb = set->fb;
+ set->crtc->primary->fb = set->fb;
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
save_set.fb)) {
DRM_ERROR("failed to set mode on [CRTC:%d]\n",
set->crtc->base.id);
- set->crtc->fb = save_set.fb;
+ set->crtc->primary->fb = save_set.fb;
ret = -EINVAL;
goto fail;
}
set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
}
}
- drm_helper_disable_unused_functions(dev);
+ __drm_helper_disable_unused_functions(dev);
} else if (fb_changed) {
set->crtc->x = set->x;
set->crtc->y = set->y;
- set->crtc->fb = set->fb;
+ set->crtc->primary->fb = set->fb;
ret = crtc_funcs->mode_set_base(set->crtc,
set->x, set->y, save_set.fb);
if (ret != 0) {
set->crtc->x = save_set.x;
set->crtc->y = save_set.y;
- set->crtc->fb = save_set.fb;
+ set->crtc->primary->fb = save_set.fb;
goto fail;
}
}
int encoder_dpms;
bool ret;
+ drm_modeset_lock_all(dev);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->enabled)
continue;
ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y, crtc->fb);
+ crtc->x, crtc->y, crtc->primary->fb);
/* Restoring the old config should never fail! */
if (ret == false)
}
/* disable the unused connectors while restoring the modesetting */
- drm_helper_disable_unused_functions(dev);
+ __drm_helper_disable_unused_functions(dev);
+ drm_modeset_unlock_all(dev);
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
-
-/**
- * drm_kms_helper_hotplug_event - fire off KMS hotplug events
- * @dev: drm_device whose connector state changed
- *
- * This function fires off the uevent for userspace and also calls the
- * output_poll_changed function, which is most commonly used to inform the fbdev
- * emulation code and allow it to update the fbcon output configuration.
- *
- * Drivers should call this from their hotplug handling code when a change is
- * detected. Note that this function does not do any output detection of its
- * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the
- * driver already.
- *
- * This function must be called from process context with no mode
- * setting locks held.
- */
-void drm_kms_helper_hotplug_event(struct drm_device *dev)
-{
- /* send a uevent + call fbdev */
- drm_sysfs_hotplug_event(dev);
- if (dev->mode_config.funcs->output_poll_changed)
- dev->mode_config.funcs->output_poll_changed(dev);
-}
-EXPORT_SYMBOL(drm_kms_helper_hotplug_event);
-
-#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
-static void output_poll_execute(struct work_struct *work)
-{
- struct delayed_work *delayed_work = to_delayed_work(work);
- struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
- struct drm_connector *connector;
- enum drm_connector_status old_status;
- bool repoll = false, changed = false;
-
- if (!drm_kms_helper_poll)
- return;
-
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-
- /* Ignore forced connectors. */
- if (connector->force)
- continue;
-
- /* Ignore HPD capable connectors and connectors where we don't
- * want any hotplug detection at all for polling. */
- if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
- continue;
-
- repoll = true;
-
- old_status = connector->status;
- /* if we are connected and don't want to poll for disconnect
- skip it */
- if (old_status == connector_status_connected &&
- !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
- continue;
-
- connector->status = connector->funcs->detect(connector, false);
- if (old_status != connector->status) {
- const char *old, *new;
-
- old = drm_get_connector_status_name(old_status);
- new = drm_get_connector_status_name(connector->status);
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] "
- "status updated from %s to %s\n",
- connector->base.id,
- drm_get_connector_name(connector),
- old, new);
-
- changed = true;
- }
- }
-
- mutex_unlock(&dev->mode_config.mutex);
-
- if (changed)
- drm_kms_helper_hotplug_event(dev);
-
- if (repoll)
- schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
-}
-
-/**
- * drm_kms_helper_poll_disable - disable output polling
- * @dev: drm_device
- *
- * This function disables the output polling work.
- *
- * Drivers can call this helper from their device suspend implementation. It is
- * not an error to call this even when output polling isn't enabled or arlready
- * disabled.
- */
-void drm_kms_helper_poll_disable(struct drm_device *dev)
-{
- if (!dev->mode_config.poll_enabled)
- return;
- cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
-}
-EXPORT_SYMBOL(drm_kms_helper_poll_disable);
-
-/**
- * drm_kms_helper_poll_enable - re-enable output polling.
- * @dev: drm_device
- *
- * This function re-enables the output polling work.
- *
- * Drivers can call this helper from their device resume implementation. It is
- * an error to call this when the output polling support has not yet been set
- * up.
- */
-void drm_kms_helper_poll_enable(struct drm_device *dev)
-{
- bool poll = false;
- struct drm_connector *connector;
-
- if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
- return;
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
- DRM_CONNECTOR_POLL_DISCONNECT))
- poll = true;
- }
-
- if (poll)
- schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
-}
-EXPORT_SYMBOL(drm_kms_helper_poll_enable);
-
-/**
- * drm_kms_helper_poll_init - initialize and enable output polling
- * @dev: drm_device
- *
- * This function intializes and then also enables output polling support for
- * @dev. Drivers which do not have reliable hotplug support in hardware can use
- * this helper infrastructure to regularly poll such connectors for changes in
- * their connection state.
- *
- * Drivers can control which connectors are polled by setting the
- * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On
- * connectors where probing live outputs can result in visual distortion drivers
- * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this.
- * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are
- * completely ignored by the polling logic.
- *
- * Note that a connector can be both polled and probed from the hotplug handler,
- * in case the hotplug interrupt is known to be unreliable.
- */
-void drm_kms_helper_poll_init(struct drm_device *dev)
-{
- INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
- dev->mode_config.poll_enabled = true;
-
- drm_kms_helper_poll_enable(dev);
-}
-EXPORT_SYMBOL(drm_kms_helper_poll_init);
-
-/**
- * drm_kms_helper_poll_fini - disable output polling and clean it up
- * @dev: drm_device
- */
-void drm_kms_helper_poll_fini(struct drm_device *dev)
-{
- drm_kms_helper_poll_disable(dev);
-}
-EXPORT_SYMBOL(drm_kms_helper_poll_fini);
-
-/**
- * drm_helper_hpd_irq_event - hotplug processing
- * @dev: drm_device
- *
- * Drivers can use this helper function to run a detect cycle on all connectors
- * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All
- * other connectors are ignored, which is useful to avoid reprobing fixed
- * panels.
- *
- * This helper function is useful for drivers which can't or don't track hotplug
- * interrupts for each connector.
- *
- * Drivers which support hotplug interrupts for each connector individually and
- * which have a more fine-grained detect logic should bypass this code and
- * directly call drm_kms_helper_hotplug_event() in case the connector state
- * changed.
- *
- * This function must be called from process context with no mode
- * setting locks held.
- *
- * Note that a connector can be both polled and probed from the hotplug handler,
- * in case the hotplug interrupt is known to be unreliable.
- */
-bool drm_helper_hpd_irq_event(struct drm_device *dev)
-{
- struct drm_connector *connector;
- enum drm_connector_status old_status;
- bool changed = false;
-
- if (!dev->mode_config.poll_enabled)
- return false;
-
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-
- /* Only handle HPD capable connectors. */
- if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
- continue;
-
- old_status = connector->status;
-
- connector->status = connector->funcs->detect(connector, false);
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
- connector->base.id,
- drm_get_connector_name(connector),
- drm_get_connector_status_name(old_status),
- drm_get_connector_status_name(connector->status));
- if (old_status != connector->status)
- changed = true;
- }
-
- mutex_unlock(&dev->mode_config.mutex);
-
- if (changed)
- drm_kms_helper_hotplug_event(dev);
-
- return changed;
-}
-EXPORT_SYMBOL(drm_helper_hpd_irq_event);
projects / karo-tx-linux.git / blobdiff