* - the unit is screen coordinates.
* @src_y: offset y on a framebuffer to be displayed.
* - the unit is screen coordinates.
- * @src_width: width of a partial image to be displayed from framebuffer.
- * @src_height: height of a partial image to be displayed from framebuffer.
- * @fb_width: width of a framebuffer.
- * @fb_height: height of a framebuffer.
+ * @src_w: width of a partial image to be displayed from framebuffer.
+ * @src_h: height of a partial image to be displayed from framebuffer.
* @crtc_x: offset x on hardware screen.
* @crtc_y: offset y on hardware screen.
- * @crtc_width: window width to be displayed (hardware screen).
- * @crtc_height: window height to be displayed (hardware screen).
- * @mode_width: width of screen mode.
- * @mode_height: height of screen mode.
+ * @crtc_w: window width to be displayed (hardware screen).
+ * @crtc_h: window height to be displayed (hardware screen).
* @h_ratio: horizontal scaling ratio, 16.16 fixed point
* @v_ratio: vertical scaling ratio, 16.16 fixed point
- * @refresh: refresh rate.
- * @scan_flag: interlace or progressive way.
- * (it could be DRM_MODE_FLAG_*)
- * @bpp: pixel size.(in bit)
- * @pixel_format: fourcc pixel format of this overlay
* @dma_addr: array of bus(accessed by dma) address to the memory region
* allocated for a overlay.
* @zpos: order of overlay layer(z position).
struct drm_plane base;
unsigned int src_x;
unsigned int src_y;
- unsigned int src_width;
- unsigned int src_height;
- unsigned int fb_width;
- unsigned int fb_height;
+ unsigned int src_w;
+ unsigned int src_h;
unsigned int crtc_x;
unsigned int crtc_y;
- unsigned int crtc_width;
- unsigned int crtc_height;
- unsigned int mode_width;
- unsigned int mode_height;
+ unsigned int crtc_w;
+ unsigned int crtc_h;
unsigned int h_ratio;
unsigned int v_ratio;
- unsigned int refresh;
- unsigned int scan_flag;
- unsigned int bpp;
- unsigned int pitch;
- uint32_t pixel_format;
dma_addr_t dma_addr[MAX_FB_BUFFER];
unsigned int zpos;
};
* @mode_set: convert drm_display_mode to hw specific display mode and
* would be called by encoder->mode_set().
* @check_mode: check if mode is valid or not.
- * @dpms: display device on or off.
+ * @enable: display device on.
+ * @disable: display device off.
* @commit: apply changes to hw
*/
struct exynos_drm_display;
struct drm_display_mode *mode);
int (*check_mode)(struct exynos_drm_display *display,
struct drm_display_mode *mode);
- void (*dpms)(struct exynos_drm_display *display, int mode);
+ void (*enable)(struct exynos_drm_display *display);
+ void (*disable)(struct exynos_drm_display *display);
void (*commit)(struct exynos_drm_display *display);
};
* @disable_vblank: specific driver callback for disabling vblank interrupt.
* @wait_for_vblank: wait for vblank interrupt to make sure that
* hardware overlay is updated.
- * @win_commit: apply hardware specific overlay data to registers.
- * @win_disable: disable hardware specific overlay.
+ * @update_plane: apply hardware specific overlay data to registers.
+ * @disable_plane: disable hardware specific overlay.
* @te_handler: trigger to transfer video image at the tearing effect
* synchronization signal if there is a page flip request.
* @clock_enable: optional function enabling/disabling display domain clock,
int (*enable_vblank)(struct exynos_drm_crtc *crtc);
void (*disable_vblank)(struct exynos_drm_crtc *crtc);
void (*wait_for_vblank)(struct exynos_drm_crtc *crtc);
- void (*win_commit)(struct exynos_drm_crtc *crtc, unsigned int zpos);
- void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos);
+ void (*update_plane)(struct exynos_drm_crtc *crtc,
+ struct exynos_drm_plane *plane);
+ void (*disable_plane)(struct exynos_drm_crtc *crtc,
+ struct exynos_drm_plane *plane);
void (*te_handler)(struct exynos_drm_crtc *crtc);
void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable);
- void (*clear_channels)(struct exynos_drm_crtc *crtc);
};
/*