*/
#include <linux/i2c.h>
-#include <linux/pm_runtime.h>
#include <drm/drmP.h>
#include "framebuffer.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
-#include "psb_intel_display.h"
+#include "gma_display.h"
#include "power.h"
#include "cdv_device.h"
+static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock);
-struct cdv_intel_range_t {
- int min, max;
-};
-
-struct cdv_intel_p2_t {
- int dot_limit;
- int p2_slow, p2_fast;
-};
-
-struct cdv_intel_clock_t {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
-};
-
-#define INTEL_P2_NUM 2
-
-struct cdv_intel_limit_t {
- struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1;
- struct cdv_intel_p2_t p2;
- bool (*find_pll)(const struct cdv_intel_limit_t *, struct drm_crtc *,
- int, int, struct cdv_intel_clock_t *);
-};
-
-static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit,
- struct drm_crtc *crtc, int target, int refclk,
- struct cdv_intel_clock_t *best_clock);
-static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target,
- int refclk,
- struct cdv_intel_clock_t *best_clock);
#define CDV_LIMIT_SINGLE_LVDS_96 0
#define CDV_LIMIT_SINGLE_LVDS_100 1
#define CDV_LIMIT_DP_27 4
#define CDV_LIMIT_DP_100 5
-static const struct cdv_intel_limit_t cdv_intel_limits[] = {
+static const struct gma_limit_t cdv_intel_limits[] = {
{ /* CDV_SINGLE_LVDS_96MHz */
.dot = {.min = 20000, .max = 115500},
.vco = {.min = 1800000, .max = 3600000},
.m2 = {.min = 58, .max = 158},
.p = {.min = 28, .max = 140},
.p1 = {.min = 2, .max = 10},
- .p2 = {.dot_limit = 200000,
- .p2_slow = 14, .p2_fast = 14},
- .find_pll = cdv_intel_find_best_PLL,
+ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+ .find_pll = gma_find_best_pll,
},
{ /* CDV_SINGLE_LVDS_100MHz */
.dot = {.min = 20000, .max = 115500},
* is 80-224Mhz. Prefer single channel as much as possible.
*/
.p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
- .find_pll = cdv_intel_find_best_PLL,
+ .find_pll = gma_find_best_pll,
},
{ /* CDV_DAC_HDMI_27MHz */
.dot = {.min = 20000, .max = 400000},
.p = {.min = 5, .max = 90},
.p1 = {.min = 1, .max = 9},
.p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
- .find_pll = cdv_intel_find_best_PLL,
+ .find_pll = gma_find_best_pll,
},
{ /* CDV_DAC_HDMI_96MHz */
.dot = {.min = 20000, .max = 400000},
.p = {.min = 5, .max = 100},
.p1 = {.min = 1, .max = 10},
.p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
- .find_pll = cdv_intel_find_best_PLL,
+ .find_pll = gma_find_best_pll,
},
{ /* CDV_DP_27MHz */
.dot = {.min = 160000, .max = 272000},
*/
static int
cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
- struct cdv_intel_clock_t *clock, bool is_lvds, u32 ddi_select)
+ struct gma_clock_t *clock, bool is_lvds, u32 ddi_select)
{
- struct psb_intel_crtc *psb_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_crtc->pipe;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
u32 m, n_vco, p;
int ret = 0;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
return 0;
}
-/*
- * Returns whether any encoder on the specified pipe is of the specified type
- */
-static bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *l_entry;
-
- list_for_each_entry(l_entry, &mode_config->connector_list, head) {
- if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
- struct psb_intel_encoder *psb_intel_encoder =
- psb_intel_attached_encoder(l_entry);
- if (psb_intel_encoder->type == type)
- return true;
- }
- }
- return false;
-}
-
-static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
- int refclk)
+static const struct gma_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+ int refclk)
{
- const struct cdv_intel_limit_t *limit;
- if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ const struct gma_limit_t *limit;
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
/*
* Now only single-channel LVDS is supported on CDV. If it is
* incorrect, please add the dual-channel LVDS.
limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
else
limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
- } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
- psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
+ } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ gma_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
if (refclk == 27000)
limit = &cdv_intel_limits[CDV_LIMIT_DP_27];
else
}
/* m1 is reserved as 0 in CDV, n is a ring counter */
-static void cdv_intel_clock(struct drm_device *dev,
- int refclk, struct cdv_intel_clock_t *clock)
+static void cdv_intel_clock(int refclk, struct gma_clock_t *clock)
{
clock->m = clock->m2 + 2;
clock->p = clock->p1 * clock->p2;
clock->dot = clock->vco / clock->p;
}
-
-#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
-static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc,
- const struct cdv_intel_limit_t *limit,
- struct cdv_intel_clock_t *clock)
-{
- if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
- INTELPllInvalid("p1 out of range\n");
- if (clock->p < limit->p.min || limit->p.max < clock->p)
- INTELPllInvalid("p out of range\n");
- /* unnecessary to check the range of m(m1/M2)/n again */
- if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
- INTELPllInvalid("vco out of range\n");
- /* XXX: We may need to be checking "Dot clock"
- * depending on the multiplier, connector, etc.,
- * rather than just a single range.
- */
- if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
- INTELPllInvalid("dot out of range\n");
-
- return true;
-}
-
-static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit,
- struct drm_crtc *crtc, int target, int refclk,
- struct cdv_intel_clock_t *best_clock)
+static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk,
+ struct gma_clock_t *best_clock)
{
- struct drm_device *dev = crtc->dev;
- struct cdv_intel_clock_t clock;
- int err = target;
-
-
- if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
- /*
- * For LVDS, if the panel is on, just rely on its current
- * settings for dual-channel. We haven't figured out how to
- * reliably set up different single/dual channel state, if we
- * even can.
- */
- if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- clock.m1 = 0;
- /* m1 is reserved as 0 in CDV, n is a ring counter.
- So skip the m1 loop */
- for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
- for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
- clock.m2++) {
- for (clock.p1 = limit->p1.min;
- clock.p1 <= limit->p1.max;
- clock.p1++) {
- int this_err;
-
- cdv_intel_clock(dev, refclk, &clock);
-
- if (!cdv_intel_PLL_is_valid(crtc,
- limit, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- }
-
- return err != target;
-}
-
-static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target,
- int refclk,
- struct cdv_intel_clock_t *best_clock)
-{
- struct cdv_intel_clock_t clock;
+ struct gma_clock_t clock;
if (refclk == 27000) {
if (target < 200000) {
clock.p1 = 2;
clock.p = clock.p1 * clock.p2;
clock.vco = (refclk * clock.m) / clock.n;
clock.dot = clock.vco / clock.p;
- memcpy(best_clock, &clock, sizeof(struct cdv_intel_clock_t));
+ memcpy(best_clock, &clock, sizeof(struct gma_clock_t));
return true;
}
-static int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
- int x, int y, struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- int pipe = psb_intel_crtc->pipe;
- const struct psb_offset *map = &dev_priv->regmap[pipe];
- unsigned long start, offset;
- u32 dspcntr;
- int ret = 0;
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- /* no fb bound */
- if (!crtc->fb) {
- dev_err(dev->dev, "No FB bound\n");
- goto psb_intel_pipe_cleaner;
- }
-
-
- /* We are displaying this buffer, make sure it is actually loaded
- into the GTT */
- ret = psb_gtt_pin(psbfb->gtt);
- if (ret < 0)
- goto psb_intel_pipe_set_base_exit;
- start = psbfb->gtt->offset;
- offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
-
- REG_WRITE(map->stride, crtc->fb->pitches[0]);
-
- dspcntr = REG_READ(map->cntr);
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- dev_err(dev->dev, "Unknown color depth\n");
- ret = -EINVAL;
- goto psb_intel_pipe_set_base_exit;
- }
- REG_WRITE(map->cntr, dspcntr);
-
- dev_dbg(dev->dev,
- "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
-
- REG_WRITE(map->base, offset);
- REG_READ(map->base);
- REG_WRITE(map->surf, start);
- REG_READ(map->surf);
-
-psb_intel_pipe_cleaner:
- /* If there was a previous display we can now unpin it */
- if (old_fb)
- psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
-
-psb_intel_pipe_set_base_exit:
- gma_power_end(dev);
- return ret;
-}
-
#define FIFO_PIPEA (1 << 0)
#define FIFO_PIPEB (1 << 1)
{
struct drm_crtc *crtc;
struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = NULL;
+ struct gma_crtc *gma_crtc = NULL;
crtc = dev_priv->pipe_to_crtc_mapping[pipe];
- psb_intel_crtc = to_psb_intel_crtc(crtc);
+ gma_crtc = to_gma_crtc(crtc);
- if (crtc->fb == NULL || !psb_intel_crtc->active)
+ if (crtc->fb == NULL || !gma_crtc->active)
return false;
return true;
}
static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc)
{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
- if (psb_intel_crtc->pipe != 1)
+ if (gma_crtc->pipe != 1)
return false;
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct psb_intel_encoder *psb_intel_encoder =
- psb_intel_attached_encoder(connector);
+ struct gma_encoder *gma_encoder =
+ gma_attached_encoder(connector);
if (!connector->encoder
|| connector->encoder->crtc != crtc)
continue;
- if (psb_intel_encoder->type == INTEL_OUTPUT_LVDS)
+ if (gma_encoder->type == INTEL_OUTPUT_LVDS)
return true;
}
return false;
}
-static void cdv_intel_disable_self_refresh (struct drm_device *dev)
+void cdv_disable_sr(struct drm_device *dev)
{
if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) {
REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN));
REG_READ(FW_BLC_SELF);
- cdv_intel_wait_for_vblank(dev);
+ gma_wait_for_vblank(dev);
/* Cedarview workaround to write ovelay plane, which force to leave
* MAX_FIFO state.
REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/);
REG_READ(OV_OVADD);
- cdv_intel_wait_for_vblank(dev);
+ gma_wait_for_vblank(dev);
}
}
-static void cdv_intel_update_watermark (struct drm_device *dev, struct drm_crtc *crtc)
+void cdv_update_wm(struct drm_device *dev, struct drm_crtc *crtc)
{
+ struct drm_psb_private *dev_priv = dev->dev_private;
if (cdv_intel_single_pipe_active(dev)) {
u32 fw;
REG_WRITE(DSPFW6, 0x10);
- cdv_intel_wait_for_vblank(dev);
+ gma_wait_for_vblank(dev);
/* enable self-refresh for single pipe active */
REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
REG_READ(FW_BLC_SELF);
- cdv_intel_wait_for_vblank(dev);
+ gma_wait_for_vblank(dev);
} else {
REG_WRITE(DSPFW5, 0x01010101);
REG_WRITE(DSPFW6, 0x1d0);
- cdv_intel_wait_for_vblank(dev);
-
- cdv_intel_disable_self_refresh(dev);
-
- }
-}
-
-/** Loads the palette/gamma unit for the CRTC with the prepared values */
-static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int palreg = PALETTE_A;
- int i;
-
- /* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
- return;
-
- switch (psb_intel_crtc->pipe) {
- case 0:
- break;
- case 1:
- palreg = PALETTE_B;
- break;
- case 2:
- palreg = PALETTE_C;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return;
- }
-
- if (gma_power_begin(dev, false)) {
- for (i = 0; i < 256; i++) {
- REG_WRITE(palreg + 4 * i,
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]));
- }
- gma_power_end(dev);
- } else {
- for (i = 0; i < 256; i++) {
- dev_priv->regs.pipe[0].palette[i] =
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]);
- }
-
- }
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- const struct psb_offset *map = &dev_priv->regmap[pipe];
- u32 temp;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- cdv_intel_disable_self_refresh(dev);
-
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- if (psb_intel_crtc->active)
- break;
-
- psb_intel_crtc->active = true;
-
- /* Enable the DPLL */
- temp = REG_READ(map->dpll);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- REG_WRITE(map->dpll, temp);
- REG_READ(map->dpll);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
- REG_READ(map->dpll);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
- REG_READ(map->dpll);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- }
-
- /* Jim Bish - switch plan and pipe per scott */
- /* Enable the plane */
- temp = REG_READ(map->cntr);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(map->cntr,
- temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(map->base, REG_READ(map->base));
- }
-
- udelay(150);
-
- /* Enable the pipe */
- temp = REG_READ(map->conf);
- if ((temp & PIPEACONF_ENABLE) == 0)
- REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
-
- temp = REG_READ(map->status);
- temp &= ~(0xFFFF);
- temp |= PIPE_FIFO_UNDERRUN;
- REG_WRITE(map->status, temp);
- REG_READ(map->status);
-
- cdv_intel_crtc_load_lut(crtc);
-
- /* Give the overlay scaler a chance to enable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, true); TODO */
- break;
- case DRM_MODE_DPMS_OFF:
- if (!psb_intel_crtc->active)
- break;
-
- psb_intel_crtc->active = false;
-
- /* Give the overlay scaler a chance to disable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Jim Bish - changed pipe/plane here as well. */
-
- drm_vblank_off(dev, pipe);
- /* Wait for vblank for the disable to take effect */
- cdv_intel_wait_for_vblank(dev);
-
- /* Next, disable display pipes */
- temp = REG_READ(map->conf);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
- REG_READ(map->conf);
- }
-
- /* Wait for vblank for the disable to take effect. */
- cdv_intel_wait_for_vblank(dev);
-
- udelay(150);
-
- /* Disable display plane */
- temp = REG_READ(map->cntr);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(map->cntr,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(map->base, REG_READ(map->base));
- REG_READ(map->base);
- }
-
- temp = REG_READ(map->dpll);
- if ((temp & DPLL_VCO_ENABLE) != 0) {
- REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
- REG_READ(map->dpll);
- }
+ gma_wait_for_vblank(dev);
- /* Wait for the clocks to turn off. */
- udelay(150);
- break;
+ dev_priv->ops->disable_sr(dev);
}
- cdv_intel_update_watermark(dev, crtc);
- /*Set FIFO Watermarks*/
- REG_WRITE(DSPARB, 0x3F3E);
-}
-
-static void cdv_intel_crtc_prepare(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static void cdv_intel_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
}
-
/**
* Return the pipe currently connected to the panel fitter,
* or -1 if the panel fitter is not present or not in use
{
struct drm_device *dev = crtc->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
const struct psb_offset *map = &dev_priv->regmap[pipe];
int refclk;
- struct cdv_intel_clock_t clock;
+ struct gma_clock_t clock;
u32 dpll = 0, dspcntr, pipeconf;
bool ok;
bool is_crt = false, is_lvds = false, is_tv = false;
bool is_hdmi = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
- const struct cdv_intel_limit_t *limit;
+ const struct gma_limit_t *limit;
u32 ddi_select = 0;
bool is_edp = false;
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct psb_intel_encoder *psb_intel_encoder =
- psb_intel_attached_encoder(connector);
+ struct gma_encoder *gma_encoder =
+ gma_attached_encoder(connector);
if (!connector->encoder
|| connector->encoder->crtc != crtc)
continue;
- ddi_select = psb_intel_encoder->ddi_select;
- switch (psb_intel_encoder->type) {
+ ddi_select = gma_encoder->ddi_select;
+ switch (gma_encoder->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
drm_mode_debug_printmodeline(adjusted_mode);
- limit = cdv_intel_limit(crtc, refclk);
+ limit = gma_crtc->clock_funcs->limit(crtc, refclk);
ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
&clock);
if (!ok) {
- dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
+ DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
+ adjusted_mode->clock, clock.dot);
return 0;
}
REG_WRITE(map->conf, pipeconf);
REG_READ(map->conf);
- cdv_intel_wait_for_vblank(dev);
+ gma_wait_for_vblank(dev);
REG_WRITE(map->cntr, dspcntr);
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
}
- cdv_intel_wait_for_vblank(dev);
-
- return 0;
-}
-
-
-/**
- * Save HW states of giving crtc
- */
-static void cdv_intel_crtc_save(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe];
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_dbg(dev->dev, "No CRTC state found\n");
- return;
- }
-
- crtc_state->saveDSPCNTR = REG_READ(map->cntr);
- crtc_state->savePIPECONF = REG_READ(map->conf);
- crtc_state->savePIPESRC = REG_READ(map->src);
- crtc_state->saveFP0 = REG_READ(map->fp0);
- crtc_state->saveFP1 = REG_READ(map->fp1);
- crtc_state->saveDPLL = REG_READ(map->dpll);
- crtc_state->saveHTOTAL = REG_READ(map->htotal);
- crtc_state->saveHBLANK = REG_READ(map->hblank);
- crtc_state->saveHSYNC = REG_READ(map->hsync);
- crtc_state->saveVTOTAL = REG_READ(map->vtotal);
- crtc_state->saveVBLANK = REG_READ(map->vblank);
- crtc_state->saveVSYNC = REG_READ(map->vsync);
- crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
-
- /*NOTE: DSPSIZE DSPPOS only for psb*/
- crtc_state->saveDSPSIZE = REG_READ(map->size);
- crtc_state->saveDSPPOS = REG_READ(map->pos);
-
- crtc_state->saveDSPBASE = REG_READ(map->base);
-
- DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- crtc_state->saveDSPCNTR,
- crtc_state->savePIPECONF,
- crtc_state->savePIPESRC,
- crtc_state->saveFP0,
- crtc_state->saveFP1,
- crtc_state->saveDPLL,
- crtc_state->saveHTOTAL,
- crtc_state->saveHBLANK,
- crtc_state->saveHSYNC,
- crtc_state->saveVTOTAL,
- crtc_state->saveVBLANK,
- crtc_state->saveVSYNC,
- crtc_state->saveDSPSTRIDE,
- crtc_state->saveDSPSIZE,
- crtc_state->saveDSPPOS,
- crtc_state->saveDSPBASE
- );
-
- paletteReg = map->palette;
- for (i = 0; i < 256; ++i)
- crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
-}
-
-/**
- * Restore HW states of giving crtc
- */
-static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe];
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_dbg(dev->dev, "No crtc state\n");
- return;
- }
-
- DRM_DEBUG(
- "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- REG_READ(map->cntr),
- REG_READ(map->conf),
- REG_READ(map->src),
- REG_READ(map->fp0),
- REG_READ(map->fp1),
- REG_READ(map->dpll),
- REG_READ(map->htotal),
- REG_READ(map->hblank),
- REG_READ(map->hsync),
- REG_READ(map->vtotal),
- REG_READ(map->vblank),
- REG_READ(map->vsync),
- REG_READ(map->stride),
- REG_READ(map->size),
- REG_READ(map->pos),
- REG_READ(map->base)
- );
-
- DRM_DEBUG(
- "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- crtc_state->saveDSPCNTR,
- crtc_state->savePIPECONF,
- crtc_state->savePIPESRC,
- crtc_state->saveFP0,
- crtc_state->saveFP1,
- crtc_state->saveDPLL,
- crtc_state->saveHTOTAL,
- crtc_state->saveHBLANK,
- crtc_state->saveHSYNC,
- crtc_state->saveVTOTAL,
- crtc_state->saveVBLANK,
- crtc_state->saveVSYNC,
- crtc_state->saveDSPSTRIDE,
- crtc_state->saveDSPSIZE,
- crtc_state->saveDSPPOS,
- crtc_state->saveDSPBASE
- );
-
-
- if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
- REG_WRITE(map->dpll,
- crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
- REG_READ(map->dpll);
- DRM_DEBUG("write dpll: %x\n",
- REG_READ(map->dpll));
- udelay(150);
- }
-
- REG_WRITE(map->fp0, crtc_state->saveFP0);
- REG_READ(map->fp0);
-
- REG_WRITE(map->fp1, crtc_state->saveFP1);
- REG_READ(map->fp1);
-
- REG_WRITE(map->dpll, crtc_state->saveDPLL);
- REG_READ(map->dpll);
- udelay(150);
-
- REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
- REG_WRITE(map->hblank, crtc_state->saveHBLANK);
- REG_WRITE(map->hsync, crtc_state->saveHSYNC);
- REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
- REG_WRITE(map->vblank, crtc_state->saveVBLANK);
- REG_WRITE(map->vsync, crtc_state->saveVSYNC);
- REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
-
- REG_WRITE(map->size, crtc_state->saveDSPSIZE);
- REG_WRITE(map->pos, crtc_state->saveDSPPOS);
-
- REG_WRITE(map->src, crtc_state->savePIPESRC);
- REG_WRITE(map->base, crtc_state->saveDSPBASE);
- REG_WRITE(map->conf, crtc_state->savePIPECONF);
-
- cdv_intel_wait_for_vblank(dev);
-
- REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
- REG_WRITE(map->base, crtc_state->saveDSPBASE);
-
- cdv_intel_wait_for_vblank(dev);
-
- paletteReg = map->palette;
- for (i = 0; i < 256; ++i)
- REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
-}
-
-static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file_priv,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
- uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
- size_t addr = 0;
- struct gtt_range *gt;
- struct drm_gem_object *obj;
- int ret = 0;
-
- /* if we want to turn of the cursor ignore width and height */
- if (!handle) {
- /* turn off the cursor */
- temp = CURSOR_MODE_DISABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, 0);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
-
- return 0;
- }
-
- /* Currently we only support 64x64 cursors */
- if (width != 64 || height != 64) {
- dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
- return -EINVAL;
- }
-
- obj = drm_gem_object_lookup(dev, file_priv, handle);
- if (!obj)
- return -ENOENT;
-
- if (obj->size < width * height * 4) {
- dev_dbg(dev->dev, "buffer is to small\n");
- ret = -ENOMEM;
- goto unref_cursor;
- }
-
- gt = container_of(obj, struct gtt_range, gem);
-
- /* Pin the memory into the GTT */
- ret = psb_gtt_pin(gt);
- if (ret) {
- dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
- goto unref_cursor;
- }
-
- addr = gt->offset; /* Or resource.start ??? */
-
- psb_intel_crtc->cursor_addr = addr;
-
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- }
-
- psb_intel_crtc->cursor_obj = obj;
- return ret;
-
-unref_cursor:
- drm_gem_object_unreference(obj);
- return ret;
-}
-
-static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t temp = 0;
- uint32_t adder;
-
-
- if (x < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
- x = -x;
- }
- if (y < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
- y = -y;
- }
-
- temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
- temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+ gma_wait_for_vblank(dev);
- adder = psb_intel_crtc->cursor_addr;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
- REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
- gma_power_end(dev);
- }
return 0;
}
-static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, uint32_t start, uint32_t size)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int i;
- int end = (start + size > 256) ? 256 : start + size;
-
- for (i = start; i < end; i++) {
- psb_intel_crtc->lut_r[i] = red[i] >> 8;
- psb_intel_crtc->lut_g[i] = green[i] >> 8;
- psb_intel_crtc->lut_b[i] = blue[i] >> 8;
- }
-
- cdv_intel_crtc_load_lut(crtc);
-}
-
-static int cdv_crtc_set_config(struct drm_mode_set *set)
-{
- int ret = 0;
- struct drm_device *dev = set->crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!dev_priv->rpm_enabled)
- return drm_crtc_helper_set_config(set);
-
- pm_runtime_forbid(&dev->pdev->dev);
-
- ret = drm_crtc_helper_set_config(set);
-
- pm_runtime_allow(&dev->pdev->dev);
-
- return ret;
-}
-
/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
/* FIXME: why are we using this, should it be cdv_ in this tree ? */
-static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock)
+static void i8xx_clock(int refclk, struct gma_clock_t *clock)
{
clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
clock->p = clock->p1 * clock->p2;
struct drm_crtc *crtc)
{
struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
const struct psb_offset *map = &dev_priv->regmap[pipe];
u32 dpll;
u32 fp;
- struct cdv_intel_clock_t clock;
+ struct gma_clock_t clock;
bool is_lvds;
struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc)
{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
const struct psb_offset *map = &dev_priv->regmap[pipe];
return mode;
}
-static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
-
- kfree(psb_intel_crtc->crtc_state);
- drm_crtc_cleanup(crtc);
- kfree(psb_intel_crtc);
-}
-
-static void cdv_intel_crtc_disable(struct drm_crtc *crtc)
-{
- struct gtt_range *gt;
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-
- if (crtc->fb) {
- gt = to_psb_fb(crtc->fb)->gtt;
- psb_gtt_unpin(gt);
- }
-}
-
const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
- .dpms = cdv_intel_crtc_dpms,
- .mode_fixup = cdv_intel_crtc_mode_fixup,
+ .dpms = gma_crtc_dpms,
+ .mode_fixup = gma_crtc_mode_fixup,
.mode_set = cdv_intel_crtc_mode_set,
- .mode_set_base = cdv_intel_pipe_set_base,
- .prepare = cdv_intel_crtc_prepare,
- .commit = cdv_intel_crtc_commit,
- .disable = cdv_intel_crtc_disable,
+ .mode_set_base = gma_pipe_set_base,
+ .prepare = gma_crtc_prepare,
+ .commit = gma_crtc_commit,
+ .disable = gma_crtc_disable,
};
const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
- .save = cdv_intel_crtc_save,
- .restore = cdv_intel_crtc_restore,
- .cursor_set = cdv_intel_crtc_cursor_set,
- .cursor_move = cdv_intel_crtc_cursor_move,
- .gamma_set = cdv_intel_crtc_gamma_set,
- .set_config = cdv_crtc_set_config,
- .destroy = cdv_intel_crtc_destroy,
+ .save = gma_crtc_save,
+ .restore = gma_crtc_restore,
+ .cursor_set = gma_crtc_cursor_set,
+ .cursor_move = gma_crtc_cursor_move,
+ .gamma_set = gma_crtc_gamma_set,
+ .set_config = gma_crtc_set_config,
+ .destroy = gma_crtc_destroy,
+};
+
+const struct gma_clock_funcs cdv_clock_funcs = {
+ .clock = cdv_intel_clock,
+ .limit = cdv_intel_limit,
+ .pll_is_valid = gma_pll_is_valid,
};
projects / karo-tx-linux.git / blobdiff