Merge remote-tracking branch 'xtensa/for_next'

[karo-tx-linux.git] / drivers / gpu / drm / i2c / adv7511.c

diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index 533d1e3d4a999f971b2479f471c965e3708a73f2..a02112ba1c3df692b3a089a3ab24a8f30d35b7ec 100644 (file)
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -136,6 +136,7 @@ static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
        case ADV7511_REG_BKSV(3):
        case ADV7511_REG_BKSV(4):
        case ADV7511_REG_DDC_STATUS:
+       case ADV7511_REG_EDID_READ_CTRL:
        case ADV7511_REG_BSTATUS(0):
        case ADV7511_REG_BSTATUS(1):
        case ADV7511_REG_CHIP_ID_HIGH:
@@ -362,24 +363,31 @@ static void adv7511_power_on(struct adv7511 *adv7511)
 {
        adv7511->current_edid_segment = -1;
 
-       regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-                    ADV7511_INT0_EDID_READY);
-       regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
-                    ADV7511_INT1_DDC_ERROR);
        regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
                           ADV7511_POWER_POWER_DOWN, 0);
+       if (adv7511->i2c_main->irq) {
+               /*
+                * Documentation says the INT_ENABLE registers are reset in
+                * POWER_DOWN mode. My 7511w preserved the bits, however.
+                * Still, let's be safe and stick to the documentation.
+                */
+               regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+                            ADV7511_INT0_EDID_READY);
+               regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+                            ADV7511_INT1_DDC_ERROR);
+       }
 
        /*
-        * Per spec it is allowed to pulse the HDP signal to indicate that the
+        * Per spec it is allowed to pulse the HPD signal to indicate that the
         * EDID information has changed. Some monitors do this when they wakeup
-        * from standby or are enabled. When the HDP goes low the adv7511 is
+        * from standby or are enabled. When the HPD goes low the adv7511 is
         * reset and the outputs are disabled which might cause the monitor to
-        * go to standby again. To avoid this we ignore the HDP pin for the
+        * go to standby again. To avoid this we ignore the HPD pin for the
         * first few seconds after enabling the output.
         */
        regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
-                          ADV7511_REG_POWER2_HDP_SRC_MASK,
-                          ADV7511_REG_POWER2_HDP_SRC_NONE);
+                          ADV7511_REG_POWER2_HPD_SRC_MASK,
+                          ADV7511_REG_POWER2_HPD_SRC_NONE);
 
        /*
         * Most of the registers are reset during power down or when HPD is low.
@@ -413,9 +421,9 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
        if (ret < 0)
                return false;
 
-       if (irq0 & ADV7511_INT0_HDP) {
+       if (irq0 & ADV7511_INT0_HPD) {
                regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-                            ADV7511_INT0_HDP);
+                            ADV7511_INT0_HPD);
                return true;
        }
 
@@ -438,7 +446,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511)
        regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
        regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
-       if (irq0 & ADV7511_INT0_HDP && adv7511->encoder)
+       if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
                drm_helper_hpd_irq_event(adv7511->encoder->dev);
 
        if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
@@ -567,12 +575,14 @@ static int adv7511_get_modes(struct drm_encoder *encoder,
 
        /* Reading the EDID only works if the device is powered */
        if (!adv7511->powered) {
-               regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-                            ADV7511_INT0_EDID_READY);
-               regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
-                            ADV7511_INT1_DDC_ERROR);
                regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
                                   ADV7511_POWER_POWER_DOWN, 0);
+               if (adv7511->i2c_main->irq) {
+                       regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+                                    ADV7511_INT0_EDID_READY);
+                       regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+                                    ADV7511_INT1_DDC_ERROR);
+               }
                adv7511->current_edid_segment = -1;
        }
 
@@ -638,10 +648,10 @@ adv7511_encoder_detect(struct drm_encoder *encoder,
                if (adv7511->status == connector_status_connected)
                        status = connector_status_disconnected;
        } else {
-               /* Renable HDP sensing */
+               /* Renable HPD sensing */
                regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
-                                  ADV7511_REG_POWER2_HDP_SRC_MASK,
-                                  ADV7511_REG_POWER2_HDP_SRC_BOTH);
+                                  ADV7511_REG_POWER2_HPD_SRC_MASK,
+                                  ADV7511_REG_POWER2_HPD_SRC_BOTH);
        }
 
        adv7511->status = status;