#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+#define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
+#define MI_ARB_ENABLE (1<<0)
+#define MI_ARB_DISABLE (0<<0)
#define MI_SET_CONTEXT MI_INSTR(0x18, 0)
#define MI_MM_SPACE_GTT (1<<8)
#define DISPLAY_PLANE_B (1<<20)
#define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2))
#define PIPE_CONTROL_CS_STALL (1<<20)
+#define PIPE_CONTROL_TLB_INVALIDATE (1<<18)
#define PIPE_CONTROL_QW_WRITE (1<<14)
#define PIPE_CONTROL_DEPTH_STALL (1<<13)
#define PIPE_CONTROL_WRITE_FLUSH (1<<12)
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
#define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK (1 << 16)
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE (1 << 0)
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3)
+#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)
+#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
+#define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
+#define GEN6_BSD_GO_INDICATOR (1 << 4)
#define GEN6_BSD_HWSTAM 0x12098
#define GEN6_BSD_IMR 0x120a8
#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
+#define DPLL_LOCK_VLV (1<<15)
#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
#define SRX_INDEX 0x3c4
#define DDRMPLL1 0X12c20
#define PEG_BAND_GAP_DATA 0x14d68
+#define GEN6_GT_THREAD_STATUS_REG 0x13805c
+#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7
+#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16))
+
#define GEN6_GT_PERF_STATUS 0x145948
#define GEN6_RP_STATE_LIMITS 0x145994
#define GEN6_RP_STATE_CAP 0x145998
*/
#define CCID 0x2180
#define CCID_EN (1<<0)
+#define CXT_SIZE 0x21a0
+#define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f)
+#define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f)
+#define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f)
+#define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f)
+#define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f)
+#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_POWER_SIZE(cxt_reg) + \
+ GEN6_CXT_RING_SIZE(cxt_reg) + \
+ GEN6_CXT_RENDER_SIZE(cxt_reg) + \
+ GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \
+ GEN6_CXT_PIPELINE_SIZE(cxt_reg))
+#define GEN7_CXT_SIZE 0x21a8
+#define GEN7_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 25) & 0x7f)
+#define GEN7_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 22) & 0x7)
+#define GEN7_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f)
+#define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f)
+#define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7)
+#define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f)
+#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \
+ GEN7_CXT_RING_SIZE(ctx_reg) + \
+ GEN7_CXT_RENDER_SIZE(ctx_reg) + \
+ GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
+ GEN7_CXT_GT1_SIZE(ctx_reg) + \
+ GEN7_CXT_VFSTATE_SIZE(ctx_reg))
+
/*
* Overlay regs
*/
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define PORT_HOTPLUG_STAT 0x61114
-#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
-#define DPB_HOTPLUG_INT_STATUS (1 << 29)
-#define HDMIC_HOTPLUG_INT_STATUS (1 << 28)
-#define DPC_HOTPLUG_INT_STATUS (1 << 28)
-#define HDMID_HOTPLUG_INT_STATUS (1 << 27)
-#define DPD_HOTPLUG_INT_STATUS (1 << 27)
+/* HDMI/DP bits are gen4+ */
+#define DPB_HOTPLUG_LIVE_STATUS (1 << 29)
+#define DPC_HOTPLUG_LIVE_STATUS (1 << 28)
+#define DPD_HOTPLUG_LIVE_STATUS (1 << 27)
+#define DPD_HOTPLUG_INT_STATUS (3 << 21)
+#define DPC_HOTPLUG_INT_STATUS (3 << 19)
+#define DPB_HOTPLUG_INT_STATUS (3 << 17)
+/* HDMI bits are shared with the DP bits */
+#define HDMIB_HOTPLUG_LIVE_STATUS (1 << 29)
+#define HDMIC_HOTPLUG_LIVE_STATUS (1 << 28)
+#define HDMID_HOTPLUG_LIVE_STATUS (1 << 27)
+#define HDMID_HOTPLUG_INT_STATUS (3 << 21)
+#define HDMIC_HOTPLUG_INT_STATUS (3 << 19)
+#define HDMIB_HOTPLUG_INT_STATUS (3 << 17)
+/* CRT/TV common between gen3+ */
#define CRT_HOTPLUG_INT_STATUS (1 << 11)
#define TV_HOTPLUG_INT_STATUS (1 << 10)
#define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
#define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
#define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
-#define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
-#define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
+/* SDVO is different across gen3/4 */
+#define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3)
+#define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2)
+#define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4)
+#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2)
+#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7)
+#define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6)
/* SDVO port control */
#define SDVOB 0x61140
#define VIDEO_DIP_PORT_C (2 << 29)
#define VIDEO_DIP_PORT_D (3 << 29)
#define VIDEO_DIP_PORT_MASK (3 << 29)
+#define VIDEO_DIP_ENABLE_GCP (1 << 25)
#define VIDEO_DIP_ENABLE_AVI (1 << 21)
#define VIDEO_DIP_ENABLE_VENDOR (2 << 21)
+#define VIDEO_DIP_ENABLE_GAMUT (4 << 21)
#define VIDEO_DIP_ENABLE_SPD (8 << 21)
#define VIDEO_DIP_SELECT_AVI (0 << 19)
#define VIDEO_DIP_SELECT_VENDOR (1 << 19)
#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)
#define VIDEO_DIP_FREQ_MASK (3 << 16)
/* HSW and later: */
+#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)
+#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)
#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)
+#define VIDEO_DIP_ENABLE_VS_HSW (1 << 8)
+#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)
#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
/* Panel power sequencing */
#define PFIT_AUTO_RATIOS 0x61238
/* Backlight control */
-#define BLC_PWM_CTL 0x61254
-#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BLC_PWM_CTL2 0x61250 /* 965+ only */
-#define BLM_COMBINATION_MODE (1 << 30)
+#define BLM_PWM_ENABLE (1 << 31)
+#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */
+#define BLM_PIPE_SELECT (1 << 29)
+#define BLM_PIPE_SELECT_IVB (3 << 29)
+#define BLM_PIPE_A (0 << 29)
+#define BLM_PIPE_B (1 << 29)
+#define BLM_PIPE_C (2 << 29) /* ivb + */
+#define BLM_PIPE(pipe) ((pipe) << 29)
+#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */
+#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26)
+#define BLM_PHASE_IN_ENABLE (1 << 25)
+#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24)
+#define BLM_PHASE_IN_TIME_BASE_SHIFT (16)
+#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16)
+#define BLM_PHASE_IN_COUNT_SHIFT (8)
+#define BLM_PHASE_IN_COUNT_MASK (0xff << 8)
+#define BLM_PHASE_IN_INCR_SHIFT (0)
+#define BLM_PHASE_IN_INCR_MASK (0xff << 0)
+#define BLC_PWM_CTL 0x61254
/*
* This is the most significant 15 bits of the number of backlight cycles in a
* complete cycle of the modulated backlight control.
*
* The actual value is this field multiplied by two.
*/
-#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
-#define BLM_LEGACY_MODE (1 << 16)
+#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
*/
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe)
+#define BLM_POLARITY_PNV (1 << 0) /* pnv only */
#define BLC_HIST_CTL 0x61260
+/* New registers for PCH-split platforms. Safe where new bits show up, the
+ * register layout machtes with gen4 BLC_PWM_CTL[12]. */
+#define BLC_PWM_CPU_CTL2 0x48250
+#define BLC_PWM_CPU_CTL 0x48254
+
+/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
+ * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
+#define BLC_PWM_PCH_CTL1 0xc8250
+#define BLM_PCH_PWM_ENABLE (1 << 31)
+#define BLM_PCH_OVERRIDE_ENABLE (1 << 30)
+#define BLM_PCH_POLARITY (1 << 29)
+#define BLC_PWM_PCH_CTL2 0xc8254
+
/* TV port control */
#define TV_CTL 0x68000
/** Enables the TV encoder */
#define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
#define VLV_DPFLIPSTAT 0x70028
-#define PIPEB_LINE_COMPARE_STATUS (1<<29)
+#define PIPEB_LINE_COMPARE_INT_EN (1<<29)
#define PIPEB_HLINE_INT_EN (1<<28)
#define PIPEB_VBLANK_INT_EN (1<<27)
#define SPRITED_FLIPDONE_INT_EN (1<<26)
#define SPRITEC_FLIPDONE_INT_EN (1<<25)
#define PLANEB_FLIPDONE_INT_EN (1<<24)
-#define PIPEA_LINE_COMPARE_STATUS (1<<21)
+#define PIPEA_LINE_COMPARE_INT_EN (1<<21)
#define PIPEA_HLINE_INT_EN (1<<20)
#define PIPEA_VBLANK_INT_EN (1<<19)
#define SPRITEB_FLIPDONE_INT_EN (1<<18)
#define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE)
#define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
#define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
+#define DSPLINOFF(plane) DSPADDR(plane)
/* Display/Sprite base address macros */
#define DISP_BASEADDR_MASK (0xfffff000)
#define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK)
#define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK)
#define I915_MODIFY_DISPBASE(reg, gfx_addr) \
- (I915_WRITE(reg, gfx_addr | I915_LO_DISPBASE(I915_READ(reg))))
+ (I915_WRITE((reg), (gfx_addr) | I915_LO_DISPBASE(I915_READ(reg))))
/* VBIOS flags */
#define SWF00 0x71410
#define _FDI_RXA_TUSIZE2 0xf0038
#define _FDI_RXB_TUSIZE1 0xf1030
#define _FDI_RXB_TUSIZE2 0xf1038
+#define FDI_RX_TP1_TO_TP2_48 (2<<20)
+#define FDI_RX_TP1_TO_TP2_64 (3<<20)
+#define FDI_RX_FDI_DELAY_90 (0x90<<0)
#define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC)
#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1)
#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2)
#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
/* or SDVOB */
-#define VLV_HDMIB 0x61140
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define TRANSCODER(pipe) ((pipe) << 30)
#define PCH_LVDS 0xe1180
#define LVDS_DETECTED (1 << 1)
-#define BLC_PWM_CPU_CTL2 0x48250
-#define PWM_ENABLE (1 << 31)
-#define PWM_PIPE_A (0 << 29)
-#define PWM_PIPE_B (1 << 29)
-#define BLC_PWM_CPU_CTL 0x48254
+/* vlv has 2 sets of panel control regs. */
+#define PIPEA_PP_STATUS 0x61200
+#define PIPEA_PP_CONTROL 0x61204
+#define PIPEA_PP_ON_DELAYS 0x61208
+#define PIPEA_PP_OFF_DELAYS 0x6120c
+#define PIPEA_PP_DIVISOR 0x61210
-#define BLC_PWM_PCH_CTL1 0xc8250
-#define PWM_PCH_ENABLE (1 << 31)
-#define PWM_POLARITY_ACTIVE_LOW (1 << 29)
-#define PWM_POLARITY_ACTIVE_HIGH (0 << 29)
-#define PWM_POLARITY_ACTIVE_LOW2 (1 << 28)
-#define PWM_POLARITY_ACTIVE_HIGH2 (0 << 28)
-
-#define BLC_PWM_PCH_CTL2 0xc8254
+#define PIPEB_PP_STATUS 0x61300
+#define PIPEB_PP_CONTROL 0x61304
+#define PIPEB_PP_ON_DELAYS 0x61308
+#define PIPEB_PP_OFF_DELAYS 0x6130c
+#define PIPEB_PP_DIVISOR 0x61310
#define PCH_PP_STATUS 0xc7200
#define PCH_PP_CONTROL 0xc7204
#define FORCEWAKE 0xA18C
#define FORCEWAKE_VLV 0x1300b0
#define FORCEWAKE_ACK_VLV 0x1300b4
+#define FORCEWAKE_ACK_HSW 0x130044
#define FORCEWAKE_ACK 0x130090
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_MT_ACK 0x130040
# define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7)
#define GEN6_UCGCTL2 0x9404
+# define GEN7_VDSUNIT_CLOCK_GATE_DISABLE (1 << 30)
+# define GEN7_TDLUNIT_CLOCK_GATE_DISABLE (1 << 22)
# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13)
# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11)
+#define GEN7_UCGCTL4 0x940c
+#define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25)
+
#define GEN6_RPNSWREQ 0xA008
#define GEN6_TURBO_DISABLE (1<<31)
#define GEN6_FREQUENCY(x) ((x)<<25)
#define GEN6_RP_UP_IDLE_MIN (0x1<<3)
#define GEN6_RP_UP_BUSY_AVG (0x2<<3)
#define GEN6_RP_UP_BUSY_CONT (0x4<<3)
+#define GEN7_RP_DOWN_IDLE_AVG (0x2<<0)
#define GEN6_RP_DOWN_IDLE_CONT (0x1<<0)
#define GEN6_RP_UP_THRESHOLD 0xA02C
#define GEN6_RP_DOWN_THRESHOLD 0xA030
#define GEN6_RC6 3
#define GEN6_RC7 4
+#define GEN7_MISCCPCTL (0x9424)
+#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0)
+
+/* IVYBRIDGE DPF */
+#define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */
+#define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14)
+#define GEN7_PARITY_ERROR_VALID (1<<13)
+#define GEN7_L3CDERRST1_BANK_MASK (3<<11)
+#define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8)
+#define GEN7_PARITY_ERROR_ROW(reg) \
+ ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14)
+#define GEN7_PARITY_ERROR_BANK(reg) \
+ ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11)
+#define GEN7_PARITY_ERROR_SUBBANK(reg) \
+ ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8)
+#define GEN7_L3CDERRST1_ENABLE (1<<7)
+
+#define GEN7_L3LOG_BASE 0xB070
+#define GEN7_L3LOG_SIZE 0x80
+
#define G4X_AUD_VID_DID 0x62020
#define INTEL_AUDIO_DEVCL 0x808629FB
#define INTEL_AUDIO_DEVBLC 0x80862801
PIPE_DDI_FUNC_CTL_B)
#define PIPE_DDI_FUNC_ENABLE (1<<31)
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
-#define PIPE_DDI_PORT_MASK (0xf<<28)
+#define PIPE_DDI_PORT_MASK (7<<28)
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
#define PIPE_WM_LINETIME_B 0x45274
#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
PIPE_WM_LINETIME_A, \
- PIPE_WM_LINETIME_A)
+ PIPE_WM_LINETIME_B)
#define PIPE_WM_LINETIME_MASK (0x1ff)
#define PIPE_WM_LINETIME_TIME(x) ((x))
#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16)
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
+#define WM_DBG 0x45280
+#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
+#define WM_DBG_DISALLOW_MAXFIFO (1<<1)
+#define WM_DBG_DISALLOW_SPRITE (1<<2)
+
#endif /* _I915_REG_H_ */
projects / karo-tx-linux.git / blobdiff