struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp;
+ if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
+ return;
+
tmp = I915_READ(PFIT_CONTROL);
if (!(tmp & PFIT_ENABLE))
return;
uint16_t postoff = 0;
if (intel_crtc->config.limited_color_range)
- postoff = (16 * (1 << 13) / 255) & 0x1fff;
+ postoff = (16 * (1 << 12) / 255) & 0x1fff;
I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
/* Make sure we're not on PC8 state before disabling PC8, otherwise
* we'll hang the machine! */
- dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL);
+ gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
if (val & LCPLL_POWER_DOWN_ALLOW) {
val &= ~LCPLL_POWER_DOWN_ALLOW;
DRM_ERROR("Switching back to LCPLL failed\n");
}
- dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
+ gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
}
void hsw_enable_pc8_work(struct work_struct *__work)
else
i9xx_clock(refclk, &clock);
} else {
- u32 lvds = I915_READ(LVDS);
+ u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
if (is_lvds) {
intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1));
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
+ MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit(ring, DERRMR);
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
}
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
PIPE_CONF_CHECK_I(pipe_bpp);
- if (!IS_HASWELL(dev)) {
+ if (!HAS_DDI(dev)) {
PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock);
PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
}
{
struct drm_device *dev = crtc->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_display_mode *saved_mode, *saved_hwmode;
+ struct drm_display_mode *saved_mode;
struct intel_crtc_config *pipe_config = NULL;
struct intel_crtc *intel_crtc;
unsigned disable_pipes, prepare_pipes, modeset_pipes;
int ret = 0;
- saved_mode = kcalloc(2, sizeof(*saved_mode), GFP_KERNEL);
+ saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
if (!saved_mode)
return -ENOMEM;
- saved_hwmode = saved_mode + 1;
intel_modeset_affected_pipes(crtc, &modeset_pipes,
&prepare_pipes, &disable_pipes);
- *saved_hwmode = crtc->hwmode;
*saved_mode = crtc->mode;
/* Hack: Because we don't (yet) support global modeset on multiple
/* mode_set/enable/disable functions rely on a correct pipe
* config. */
to_intel_crtc(crtc)->config = *pipe_config;
+
+ /*
+ * Calculate and store various constants which
+ * are later needed by vblank and swap-completion
+ * timestamping. They are derived from true hwmode.
+ */
+ drm_calc_timestamping_constants(crtc,
+ &pipe_config->adjusted_mode);
}
/* Only after disabling all output pipelines that will be changed can we
for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
dev_priv->display.crtc_enable(&intel_crtc->base);
- if (modeset_pipes) {
- /* Store real post-adjustment hardware mode. */
- crtc->hwmode = pipe_config->adjusted_mode;
-
- /* Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(crtc);
- }
-
/* FIXME: add subpixel order */
done:
- if (ret && crtc->enabled) {
- crtc->hwmode = *saved_hwmode;
+ if (ret && crtc->enabled)
crtc->mode = *saved_mode;
- }
out:
kfree(pipe_config);
intel_ddi_init(dev, PORT_D);
} else if (HAS_PCH_SPLIT(dev)) {
int found;
- dpd_is_edp = intel_dpd_is_edp(dev);
+ dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
if (has_edp_a(dev))
intel_dp_init(dev, DP_A, PORT_A);
intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
PORT_C);
if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C,
- PORT_C);
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
}
intel_dsi_init(dev);
/* Sony Vaio Y cannot use SSC on LVDS */
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
- /*
- * All GM45 Acer (and its brands eMachines and Packard Bell) laptops
- * seem to use inverted backlight PWM.
- */
- { 0x2a42, 0x1025, PCI_ANY_ID, quirk_invert_brightness },
+ /* Acer Aspire 5734Z must invert backlight brightness */
+ { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
+
+ /* Acer/eMachines G725 */
+ { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
+
+ /* Acer/eMachines e725 */
+ { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
+
+ /* Acer/Packard Bell NCL20 */
+ { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
+
+ /* Acer Aspire 4736Z */
+ { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
};
static void intel_init_quirks(struct drm_device *dev)
}
intel_modeset_check_state(dev);
-
- drm_mode_config_reset(dev);
}
void intel_modeset_gem_init(struct drm_device *dev)
intel_setup_overlay(dev);
+ mutex_lock(&dev->mode_config.mutex);
+ drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, false);
+ mutex_unlock(&dev->mode_config.mutex);
}
void intel_modeset_cleanup(struct drm_device *dev)
int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
u16 gmch_ctrl;
- pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
+ pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl);
if (state)
gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
else
gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
- pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
+ pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl);
return 0;
}
projects / karo-tx-linux.git / blobdiff