]> git.karo-electronics.de Git - linux-beck.git/blobdiff - drivers/gpu/drm/nouveau/nouveau_bios.c
drm/nv40: rework lvds table parsing
[linux-beck.git] / drivers / gpu / drm / nouveau / nouveau_bios.c
index aed6068a6ca5a8c1ba351dab5499121e148c09b9..075eb894648f5501aa35e2b895a68ef3a75ce97d 100644 (file)
@@ -3198,7 +3198,6 @@ static int run_lvds_table(struct drm_device *dev, struct dcb_entry *dcbent, int
        struct nvbios *bios = &dev_priv->vbios;
        unsigned int outputset = (dcbent->or == 4) ? 1 : 0;
        uint16_t scriptptr = 0, clktable;
-       uint8_t clktableptr = 0;
 
        /*
         * For now we assume version 3.0 table - g80 support will need some
@@ -3217,26 +3216,29 @@ static int run_lvds_table(struct drm_device *dev, struct dcb_entry *dcbent, int
                scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 11 + outputset * 2]);
                break;
        case LVDS_RESET:
+               clktable = bios->fp.lvdsmanufacturerpointer + 15;
+               if (dcbent->or == 4)
+                       clktable += 8;
+
                if (dcbent->lvdsconf.use_straps_for_mode) {
                        if (bios->fp.dual_link)
-                               clktableptr += 2;
-                       if (bios->fp.BITbit1)
-                               clktableptr++;
+                               clktable += 4;
+                       if (bios->fp.if_is_24bit)
+                               clktable += 2;
                } else {
                        /* using EDID */
-                       uint8_t fallback = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
-                       int fallbackcmpval = (dcbent->or == 4) ? 4 : 1;
+                       int cmpval_24bit = (dcbent->or == 4) ? 4 : 1;
 
                        if (bios->fp.dual_link) {
-                               clktableptr += 2;
-                               fallbackcmpval *= 2;
+                               clktable += 4;
+                               cmpval_24bit <<= 1;
                        }
-                       if (fallbackcmpval & fallback)
-                               clktableptr++;
+
+                       if (bios->fp.strapless_is_24bit & cmpval_24bit)
+                               clktable += 2;
                }
 
-               /* adding outputset * 8 may not be correct */
-               clktable = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 15 + clktableptr * 2 + outputset * 8]);
+               clktable = ROM16(bios->data[clktable]);
                if (!clktable) {
                        NV_ERROR(dev, "Pixel clock comparison table not found\n");
                        return -ENOENT;
@@ -3545,7 +3547,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
         * at which modes should be set up in the dual link style.
         *
         * Following the header, the BMP (ver 0xa) table has several records,
-        * indexed by a seperate xlat table, indexed in turn by the fp strap in
+        * indexed by a separate xlat table, indexed in turn by the fp strap in
         * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
         * numbers for use by INIT_SUB which controlled panel init and power,
         * and finally a dword of ms to sleep between power off and on
@@ -3638,31 +3640,19 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
                *if_is_24bit = bios->data[lvdsofs] & 16;
                break;
        case 0x30:
-               /*
-                * My money would be on there being a 24 bit interface bit in
-                * this table, but I have no example of a laptop bios with a
-                * 24 bit panel to confirm that. Hence we shout loudly if any
-                * bit other than bit 0 is set (I've not even seen bit 1)
-                */
-               if (bios->data[lvdsofs] > 1)
-                       NV_ERROR(dev,
-                                "You have a very unusual laptop display; please report it\n");
+       case 0x40:
                /*
                 * No sign of the "power off for reset" or "reset for panel
                 * on" bits, but it's safer to assume we should
                 */
                bios->fp.power_off_for_reset = true;
                bios->fp.reset_after_pclk_change = true;
+
                /*
                 * It's ok lvdsofs is wrong for nv4x edid case; dual_link is
-                * over-written, and BITbit1 isn't used
+                * over-written, and if_is_24bit isn't used
                 */
                bios->fp.dual_link = bios->data[lvdsofs] & 1;
-               bios->fp.BITbit1 = bios->data[lvdsofs] & 2;
-               bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
-               break;
-       case 0x40:
-               bios->fp.dual_link = bios->data[lvdsofs] & 1;
                bios->fp.if_is_24bit = bios->data[lvdsofs] & 2;
                bios->fp.strapless_is_24bit = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
                bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;