#include "zx_plane_regs.h"
#include "zx_vou.h"
-struct zx_plane {
- struct drm_plane plane;
- void __iomem *layer;
- void __iomem *csc;
- void __iomem *hbsc;
- void __iomem *rsz;
-};
-
-#define to_zx_plane(plane) container_of(plane, struct zx_plane, plane)
-
static const uint32_t gl_formats[] = {
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB4444,
};
+static const uint32_t vl_formats[] = {
+ DRM_FORMAT_NV12, /* Semi-planar YUV420 */
+ DRM_FORMAT_YUV420, /* Planar YUV420 */
+ DRM_FORMAT_YUYV, /* Packed YUV422 */
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
+ DRM_FORMAT_YUV444, /* YUV444 8bit */
+ /*
+ * TODO: add formats below that HW supports:
+ * - YUV420 P010
+ * - YUV420 Hantro
+ * - YUV444 10bit
+ */
+};
+
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
+
+static int zx_vl_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *plane_state)
+{
+ struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_crtc *crtc = plane_state->crtc;
+ struct drm_crtc_state *crtc_state;
+ struct drm_rect clip;
+ int min_scale = FRAC_16_16(1, 8);
+ int max_scale = FRAC_16_16(8, 1);
+
+ if (!crtc || !fb)
+ return 0;
+
+ crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+ crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ /* nothing to check when disabling or disabled */
+ if (!crtc_state->enable)
+ return 0;
+
+ /* plane must be enabled */
+ if (!plane_state->crtc)
+ return -EINVAL;
+
+ clip.x1 = 0;
+ clip.y1 = 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+ return drm_plane_helper_check_state(plane_state, &clip,
+ min_scale, max_scale,
+ true, true);
+}
+
+static int zx_vl_get_fmt(uint32_t format)
+{
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ return VL_FMT_YUV420;
+ case DRM_FORMAT_YUV420:
+ return VL_YUV420_PLANAR | VL_FMT_YUV420;
+ case DRM_FORMAT_YUYV:
+ return VL_YUV422_YUYV | VL_FMT_YUV422;
+ case DRM_FORMAT_YVYU:
+ return VL_YUV422_YVYU | VL_FMT_YUV422;
+ case DRM_FORMAT_UYVY:
+ return VL_YUV422_UYVY | VL_FMT_YUV422;
+ case DRM_FORMAT_VYUY:
+ return VL_YUV422_VYUY | VL_FMT_YUV422;
+ case DRM_FORMAT_YUV444:
+ return VL_FMT_YUV444_8BIT;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ return -EINVAL;
+ }
+}
+
+static inline void zx_vl_set_update(struct zx_plane *zplane)
+{
+ void __iomem *layer = zplane->layer;
+
+ zx_writel_mask(layer + VL_CTRL0, VL_UPDATE, VL_UPDATE);
+}
+
+static inline void zx_vl_rsz_set_update(struct zx_plane *zplane)
+{
+ zx_writel(zplane->rsz + RSZ_VL_ENABLE_CFG, 1);
+}
+
+static int zx_vl_rsz_get_fmt(uint32_t format)
+{
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ case DRM_FORMAT_YUV420:
+ return RSZ_VL_FMT_YCBCR420;
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ return RSZ_VL_FMT_YCBCR422;
+ case DRM_FORMAT_YUV444:
+ return RSZ_VL_FMT_YCBCR444;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ return -EINVAL;
+ }
+}
+
+static inline u32 rsz_step_value(u32 src, u32 dst)
+{
+ u32 val = 0;
+
+ if (src == dst)
+ val = 0;
+ else if (src < dst)
+ val = RSZ_PARA_STEP((src << 16) / dst);
+ else if (src > dst)
+ val = RSZ_DATA_STEP(src / dst) |
+ RSZ_PARA_STEP(((src << 16) / dst) & 0xffff);
+
+ return val;
+}
+
+static void zx_vl_rsz_setup(struct zx_plane *zplane, uint32_t format,
+ u32 src_w, u32 src_h, u32 dst_w, u32 dst_h)
+{
+ void __iomem *rsz = zplane->rsz;
+ u32 src_chroma_w = src_w;
+ u32 src_chroma_h = src_h;
+ u32 fmt;
+
+ /* Set up source and destination resolution */
+ zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+ zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+ /* Configure data format for VL RSZ */
+ fmt = zx_vl_rsz_get_fmt(format);
+ if (fmt >= 0)
+ zx_writel_mask(rsz + RSZ_VL_CTRL_CFG, RSZ_VL_FMT_MASK, fmt);
+
+ /* Calculate Chroma height and width */
+ if (fmt == RSZ_VL_FMT_YCBCR420) {
+ src_chroma_w = src_w >> 1;
+ src_chroma_h = src_h >> 1;
+ } else if (fmt == RSZ_VL_FMT_YCBCR422) {
+ src_chroma_w = src_w >> 1;
+ }
+
+ /* Set up Luma and Chroma step registers */
+ zx_writel(rsz + RSZ_VL_LUMA_HOR, rsz_step_value(src_w, dst_w));
+ zx_writel(rsz + RSZ_VL_LUMA_VER, rsz_step_value(src_h, dst_h));
+ zx_writel(rsz + RSZ_VL_CHROMA_HOR, rsz_step_value(src_chroma_w, dst_w));
+ zx_writel(rsz + RSZ_VL_CHROMA_VER, rsz_step_value(src_chroma_h, dst_h));
+
+ zx_vl_rsz_set_update(zplane);
+}
+
+static void zx_vl_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ struct drm_plane_state *state = plane->state;
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_rect *src = &state->src;
+ struct drm_rect *dst = &state->dst;
+ struct drm_gem_cma_object *cma_obj;
+ void __iomem *layer = zplane->layer;
+ void __iomem *hbsc = zplane->hbsc;
+ void __iomem *paddr_reg;
+ dma_addr_t paddr;
+ u32 src_x, src_y, src_w, src_h;
+ u32 dst_x, dst_y, dst_w, dst_h;
+ uint32_t format;
+ u32 fmt;
+ int num_planes;
+ int i;
+
+ if (!fb)
+ return;
+
+ format = fb->format->format;
+
+ src_x = src->x1 >> 16;
+ src_y = src->y1 >> 16;
+ src_w = drm_rect_width(src) >> 16;
+ src_h = drm_rect_height(src) >> 16;
+
+ dst_x = dst->x1;
+ dst_y = dst->y1;
+ dst_w = drm_rect_width(dst);
+ dst_h = drm_rect_height(dst);
+
+ /* Set up data address registers for Y, Cb and Cr planes */
+ num_planes = drm_format_num_planes(format);
+ paddr_reg = layer + VL_Y;
+ for (i = 0; i < num_planes; i++) {
+ cma_obj = drm_fb_cma_get_gem_obj(fb, i);
+ paddr = cma_obj->paddr + fb->offsets[i];
+ paddr += src_y * fb->pitches[i];
+ paddr += src_x * drm_format_plane_cpp(format, i);
+ zx_writel(paddr_reg, paddr);
+ paddr_reg += 4;
+ }
+
+ /* Set up source height/width register */
+ zx_writel(layer + VL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+ /* Set up start position register */
+ zx_writel(layer + VL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+ /* Set up end position register */
+ zx_writel(layer + VL_POS_END,
+ GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+ /* Strides of Cb and Cr planes should be identical */
+ zx_writel(layer + VL_STRIDE, LUMA_STRIDE(fb->pitches[0]) |
+ CHROMA_STRIDE(fb->pitches[1]));
+
+ /* Set up video layer data format */
+ fmt = zx_vl_get_fmt(format);
+ if (fmt >= 0)
+ zx_writel(layer + VL_CTRL1, fmt);
+
+ /* Always use scaler since it exists (set for not bypass) */
+ zx_writel_mask(layer + VL_CTRL2, VL_SCALER_BYPASS_MODE,
+ VL_SCALER_BYPASS_MODE);
+
+ zx_vl_rsz_setup(zplane, format, src_w, src_h, dst_w, dst_h);
+
+ /* Enable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+ zx_vou_layer_enable(plane);
+
+ zx_vl_set_update(zplane);
+}
+
+static void zx_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ void __iomem *hbsc = zplane->hbsc;
+
+ zx_vou_layer_disable(plane);
+
+ /* Disable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
+}
+
+static const struct drm_plane_helper_funcs zx_vl_plane_helper_funcs = {
+ .atomic_check = zx_vl_plane_atomic_check,
+ .atomic_update = zx_vl_plane_atomic_update,
+ .atomic_disable = zx_plane_atomic_disable,
+};
+
static int zx_gl_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *plane_state)
{
zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
}
-void zx_plane_set_update(struct drm_plane *plane)
-{
- struct zx_plane *zplane = to_zx_plane(plane);
-
- zx_gl_rsz_set_update(zplane);
- zx_gl_set_update(zplane);
-}
-
static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
u32 dst_w, u32 dst_h)
{
/* Enable HBSC block */
zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+ zx_vou_layer_enable(plane);
+
zx_gl_set_update(zplane);
}
static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
.atomic_check = zx_gl_plane_atomic_check,
.atomic_update = zx_gl_plane_atomic_update,
+ .atomic_disable = zx_plane_atomic_disable,
};
static void zx_plane_destroy(struct drm_plane *plane)
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
+void zx_plane_set_update(struct drm_plane *plane)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+
+ /* Do nothing if the plane is not enabled */
+ if (!plane->state->crtc)
+ return;
+
+ switch (plane->type) {
+ case DRM_PLANE_TYPE_PRIMARY:
+ zx_gl_rsz_set_update(zplane);
+ zx_gl_set_update(zplane);
+ break;
+ case DRM_PLANE_TYPE_OVERLAY:
+ zx_vl_rsz_set_update(zplane);
+ zx_vl_set_update(zplane);
+ break;
+ default:
+ WARN_ONCE(1, "unsupported plane type %d\n", plane->type);
+ }
+}
+
static void zx_plane_hbsc_init(struct zx_plane *zplane)
{
void __iomem *hbsc = zplane->hbsc;
zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
}
-struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
- struct zx_layer_data *data,
- enum drm_plane_type type)
+int zx_plane_init(struct drm_device *drm, struct zx_plane *zplane,
+ enum drm_plane_type type)
{
const struct drm_plane_helper_funcs *helper;
- struct zx_plane *zplane;
- struct drm_plane *plane;
+ struct drm_plane *plane = &zplane->plane;
+ struct device *dev = zplane->dev;
const uint32_t *formats;
unsigned int format_count;
int ret;
- zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
- if (!zplane)
- return ERR_PTR(-ENOMEM);
-
- plane = &zplane->plane;
-
- zplane->layer = data->layer;
- zplane->hbsc = data->hbsc;
- zplane->csc = data->csc;
- zplane->rsz = data->rsz;
-
zx_plane_hbsc_init(zplane);
switch (type) {
format_count = ARRAY_SIZE(gl_formats);
break;
case DRM_PLANE_TYPE_OVERLAY:
- /* TODO: add video layer (vl) support */
+ helper = &zx_vl_plane_helper_funcs;
+ formats = vl_formats;
+ format_count = ARRAY_SIZE(vl_formats);
break;
default:
- return ERR_PTR(-ENODEV);
+ return -ENODEV;
}
ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
type, NULL);
if (ret) {
DRM_DEV_ERROR(dev, "failed to init universal plane: %d\n", ret);
- return ERR_PTR(ret);
+ return ret;
}
drm_plane_helper_add(plane, helper);
- return plane;
+ return 0;
}
projects / karo-tx-linux.git / blobdiff