This driver can also be built as a module. If so, the module
will be called gl520sm.
+config SENSORS_GPIO_FAN
+ tristate "GPIO fan"
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for fans connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-fan.
+
config SENSORS_CORETEMP
tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
- sensor chips.
+ MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
+ W83L771W/G/AWG/ASG sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
This driver can also be built as a module. If so, the module will
be called ltc4245.
+config SENSORS_LTC4261
+ tristate "Linear Technology LTC4261"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4261
+ Negative Voltage Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4261.
+
config SENSORS_LM95241
tristate "National Semiconductor LM95241 sensor chip"
depends on I2C
will be called sht15.
config SENSORS_S3C
- tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410
+ tristate "Samsung built-in ADC"
+ depends on S3C_ADC
help
If you say yes here you get support for the on-board ADCs of
- the Samsung S3C24XX or S3C64XX series of SoC
+ the Samsung S3C24XX, S3C64XX and other series of SoC
This driver can also be built as a module. If so, the module
- will be called s3c-hwmo.
+ will be called s3c-hwmon.
config SENSORS_S3C_RAW
bool "Include raw channel attributes in sysfs"
This driver can also be built as a module. If so, the module
will be called w83793.
+config SENSORS_W83795
+ tristate "Winbond/Nuvoton W83795G/ADG"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83795G and
+ W83795ADG hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83795.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on I2C && EXPERIMENTAL
This driver provides support for the Ultra45 workstation environmental
sensors.
-config SENSORS_HDAPS
- tristate "IBM Hard Drive Active Protection System (hdaps)"
- depends on INPUT && X86
- select INPUT_POLLDEV
- default n
- help
- This driver provides support for the IBM Hard Drive Active Protection
- System (hdaps), which provides an accelerometer and other misc. data.
- ThinkPads starting with the R50, T41, and X40 are supported. The
- accelerometer data is readable via sysfs.
-
- This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick.
-
- If your ThinkPad is not recognized by the driver, please update to latest
- BIOS. This is especially the case for some R52 ThinkPads.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of hdaps.
-
config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT