#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
/* I2C addresses to scan */
static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
-/* ISA addresses to scan (none) */
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
/* Insmod parameters */
-SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_INSMOD_1(asb100);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
static void asb100_init_client(struct i2c_client *client);
static struct i2c_driver asb100_driver = {
- .owner = THIS_MODULE,
- .name = "asb100",
+ .driver = {
+ .name = "asb100",
+ },
.id = I2C_DRIVERID_ASB100,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = asb100_attach_adapter,
.detach_client = asb100_detach_client,
};
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, asb100_detect);
+ return i2c_probe(adapter, &addr_data, asb100_detect);
}
static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
int i, id, err;
struct asb100_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
id = i2c_adapter_id(adapter);
struct i2c_client *new_client;
struct asb100_data *data;
- /* asb100 is SMBus only */
- if (i2c_is_isa_adapter(adapter)) {
- pr_debug("asb100.o: detect failed, "
- "cannot attach to legacy adapter!\n");
- err = -ENODEV;
- goto ERROR0;
- }
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
client structure, even though we cannot fill it completely yet.
But it allows us to access asb100_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
- pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+ if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+ pr_debug("asb100.o: detect failed, kzalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct asb100_data));
new_client = &data->client;
init_MUTEX(&data->lock);
if (data)
hwmon_device_unregister(data->class_dev);
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "client deregistration failed; "
- "client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
/* main client */
if (data)
vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */