#define DW_IC_TXFLR 0x74
#define DW_IC_RXFLR 0x78
#define DW_IC_TX_ABRT_SOURCE 0x80
+#define DW_IC_ENABLE_STATUS 0x9c
#define DW_IC_COMP_PARAM_1 0xf4
#define DW_IC_COMP_TYPE 0xfc
#define DW_IC_COMP_TYPE_VALUE 0x44570140
return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
}
+static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+ int timeout = 100;
+
+ do {
+ dw_writel(dev, enable, DW_IC_ENABLE);
+ if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+ return;
+
+ /*
+ * Wait 10 times the signaling period of the highest I2C
+ * transfer supported by the driver (for 400KHz this is
+ * 25us) as described in the DesignWare I2C databook.
+ */
+ usleep_range(25, 250);
+ } while (timeout--);
+
+ dev_warn(dev->dev, "timeout in %sabling adapter\n",
+ enable ? "en" : "dis");
+}
+
/**
* i2c_dw_init() - initialize the designware i2c master hardware
* @dev: device private data
}
/* Disable the adapter */
- dw_writel(dev, 0, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, false);
/* set standard and fast speed deviders for high/low periods */
return -ETIMEDOUT;
}
timeout--;
- mdelay(1);
+ usleep_range(1000, 1100);
}
return 0;
u32 ic_con;
/* Disable the adapter */
- dw_writel(dev, 0, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, false);
/* set the slave (target) address */
dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
dw_writel(dev, ic_con, DW_IC_CON);
/* Enable the adapter */
- dw_writel(dev, 1, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, true);
/* Enable interrupts */
dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
/* no error */
if (likely(!dev->cmd_err)) {
/* Disable the adapter */
- dw_writel(dev, 0, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, false);
ret = num;
goto done;
}
ret = -EIO;
done:
- pm_runtime_put(dev->dev);
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
mutex_unlock(&dev->lock);
return ret;
void i2c_dw_enable(struct dw_i2c_dev *dev)
{
/* Enable the adapter */
- dw_writel(dev, 1, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, true);
}
EXPORT_SYMBOL_GPL(i2c_dw_enable);
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
/* Disable controller */
- dw_writel(dev, 0, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, false);
/* Disable all interupts */
dw_writel(dev, 0, DW_IC_INTR_MASK);