* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
+#define DRV_NAME "ide-floppy"
+#define PFX DRV_NAME ": "
+
#define IDEFLOPPY_VERSION "1.00"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
+#include <linux/hdreg.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi_ioctl.h>
#include <linux/io.h>
#include <asm/unaligned.h>
-/* define to see debug info */
-#define IDEFLOPPY_DEBUG_LOG 0
+#include "ide-floppy.h"
-/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG(fmt, args...)
+/* module parameters */
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);
+
+/* define to see debug info */
+#define IDEFLOPPY_DEBUG_LOG 0
#if IDEFLOPPY_DEBUG_LOG
-#define debug_log(fmt, args...) \
- printk(KERN_INFO "ide-floppy: " fmt, ## args)
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
-#define debug_log(fmt, args...) do {} while (0)
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
-
-/* Some drives require a longer irq timeout. */
-#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
-
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
*/
#define IDEFLOPPY_MAX_PC_RETRIES 3
-/*
- * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
- * bytes.
- */
-#define IDEFLOPPY_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage for packet
- * commands and requests, which will remain valid while we leave the driver to
- * wait for an interrupt or a timeout event.
- */
-#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
-
/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
#define CAPACITY_NO_CARTRIDGE 0x03
/*
- * Most of our global data which we need to save even as we leave the driver
- * due to an interrupt or a timer event is stored in a variable of type
- * idefloppy_floppy_t, defined below.
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
*/
-typedef struct ide_floppy_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-
- /* Current packet command */
- struct ide_atapi_pc *pc;
- /* Last failed packet command */
- struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDEFLOPPY_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
-
- /* Last error information */
- u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
- int progress_indication;
-
- /* Device information */
- /* Current format */
- int blocks, block_size, bs_factor;
- /* Last format capacity descriptor */
- u8 cap_desc[8];
- /* Copy of the flexible disk page */
- u8 flexible_disk_page[32];
- /* Write protect */
- int wp;
- /* Supports format progress report */
- int srfp;
-} idefloppy_floppy_t;
-
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
-
-/* Defines for the MODE SENSE command */
-#define MODE_SENSE_CURRENT 0x00
-#define MODE_SENSE_CHANGEABLE 0x01
-#define MODE_SENSE_DEFAULT 0x02
-#define MODE_SENSE_SAVED 0x03
-
-/* IOCTLs used in low-level formatting. */
-#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
-#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
-#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
-#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
- * See SFF-8070i spec.
- */
-#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
-#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-
static DEFINE_MUTEX(idefloppy_ref_mutex);
-#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
-
-#define ide_floppy_g(disk) \
- container_of((disk)->private_data, struct ide_floppy_obj, driver)
-
static void idefloppy_cleanup_obj(struct kref *);
static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
struct ide_floppy_obj *floppy = NULL;
mutex_lock(&idefloppy_ref_mutex);
- floppy = ide_floppy_g(disk);
+ floppy = ide_drv_g(disk, ide_floppy_obj);
if (floppy) {
if (ide_device_get(floppy->drive))
floppy = NULL;
struct request *rq = HWGROUP(drive)->rq;
int error;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0:
+ error = IDEFLOPPY_ERROR_GENERAL;
+ break;
+
+ case 1:
+ error = 0;
+ break;
+
+ default:
+ error = uptodate;
}
+
if (error)
floppy->failed_pc = NULL;
/* Why does this happen? */
return 0;
}
-static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount, int direction)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = pc->rq;
- struct req_iterator iter;
- struct bio_vec *bvec;
- unsigned long flags;
- int count, done = 0;
- char *data;
-
- rq_for_each_segment(bvec, rq, iter) {
- if (!bcount)
- break;
-
- count = min(bvec->bv_len, bcount);
-
- data = bvec_kmap_irq(bvec, &flags);
- if (direction)
- hwif->tp_ops->output_data(drive, NULL, data, count);
- else
- hwif->tp_ops->input_data(drive, NULL, data, count);
- bvec_kunmap_irq(data, &flags);
-
- bcount -= count;
- pc->b_count += count;
- done += count;
- }
-
- idefloppy_end_request(drive, 1, done >> 9);
-
- if (bcount) {
- printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
- drive->name, __func__, bcount);
- ide_pad_transfer(drive, direction, bcount);
- }
-}
-
static void idefloppy_update_buffers(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idefloppy_end_request(drive, 1, 0);
}
-/*
- * Generate a new packet command request in front of the request queue, before
- * the current request so that it will be processed immediately, on the next
- * pass through the driver.
- */
-static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
- struct request *rq)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
-
- blk_rq_init(NULL, rq);
- rq->buffer = (char *) pc;
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd_flags |= REQ_PREEMPT;
- rq->rq_disk = floppy->disk;
- memcpy(rq->cmd, pc->c, 12);
- ide_do_drive_cmd(drive, rq);
-}
-
-static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
- floppy->pc_stack_index = 0;
- return (&floppy->pc_stack[floppy->pc_stack_index++]);
-}
-
-static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
- floppy->rq_stack_index = 0;
- return (&floppy->rq_stack[floppy->rq_stack_index++]);
-}
-
-static void ide_floppy_callback(ide_drive_t *drive)
+static void ide_floppy_callback(ide_drive_t *drive, int dsc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (floppy->failed_pc == pc)
floppy->failed_pc = NULL;
(pc->rq && blk_pc_request(pc->rq)))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- u8 *buf = floppy->pc->buf;
+ u8 *buf = pc->buf;
if (!pc->error) {
floppy->sense_key = buf[2] & 0x0F;
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
if (floppy->failed_pc)
- debug_log("pc = %x, ", floppy->failed_pc->c[0]);
+ ide_debug_log(IDE_DBG_PC, "pc = %x, ",
+ floppy->failed_pc->c[0]);
- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key, floppy->asc, floppy->ascq);
+ ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
+ "ascq = %x\n", floppy->sense_key,
+ floppy->asc, floppy->ascq);
} else
- printk(KERN_ERR "Error in REQUEST SENSE itself - "
- "Aborting request!\n");
+ printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
}
idefloppy_end_request(drive, uptodate, 0);
}
-static void idefloppy_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc, 0, sizeof(*pc));
- pc->buf = pc->pc_buf;
- pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
-}
-
-static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_REQUEST_SENSE;
- pc->c[4] = 255;
- pc->req_xfer = 18;
-}
-
-/*
- * Called when an error was detected during the last packet command. We queue a
- * request sense packet command in the head of the request list.
- */
-static void idefloppy_retry_pc(ide_drive_t *drive)
-{
- struct ide_atapi_pc *pc;
- struct request *rq;
-
- (void)ide_read_error(drive);
- pc = idefloppy_next_pc_storage(drive);
- rq = idefloppy_next_rq_storage(drive);
- idefloppy_create_request_sense_cmd(pc);
- idefloppy_queue_pc_head(drive, pc, rq);
-}
-
-/* The usual interrupt handler called during a packet command. */
-static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
- idefloppy_retry_pc, NULL, ide_floppy_io_buffers);
-}
-
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
-
- /* Timeout for the packet command */
- return IDEFLOPPY_WAIT_CMD;
-}
-
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. idefloppy_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = IDEFLOPPY_WAIT_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
-}
-
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc)
{
floppy->ascq == 0x00)
return;
- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
+ printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
"asc = %2x, ascq = %2x\n",
floppy->drive->name, pc->c[0], floppy->sense_key,
floppy->asc, floppy->ascq);
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
floppy->failed_pc = pc;
+
/* Set the current packet command */
- floppy->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
pc->error = IDEFLOPPY_ERROR_GENERAL;
floppy->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
- debug_log("Retry number - %d\n", pc->retries);
+ ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries);
pc->retries++;
- return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- IDEFLOPPY_WAIT_CMD, NULL);
-}
-
-static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
-{
- debug_log("creating prevent removal command, prevent = %d\n", prevent);
-
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
}
-static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
+void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
pc->req_xfer = 255;
}
-static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
- int l, int flags)
-{
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_FORMAT_UNIT;
- pc->c[1] = 0x17;
-
- memset(pc->buf, 0, 12);
- pc->buf[1] = 0xA2;
- /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
-
- if (flags & 1) /* Verify bit on... */
- pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
- pc->buf[3] = 8;
-
- put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
- pc->buf_size = 12;
- pc->flags |= PC_FLAG_WRITING;
-}
-
/* A mode sense command is used to "sense" floppy parameters. */
-static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
- u8 page_code, u8 type)
+void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = GPCMD_MODE_SENSE_10;
pc->c[1] = 0;
- pc->c[2] = page_code + (type << 6);
+ pc->c[2] = page_code;
switch (page_code) {
case IDEFLOPPY_CAPABILITIES_PAGE:
length += 32;
break;
default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
- "in create_mode_sense_cmd\n");
+ printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->req_xfer = length;
}
-static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
-{
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_START_STOP_UNIT;
- pc->c[4] = start;
-}
-
-static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
+static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
+ idefloppy_floppy_t *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
int cmd = rq_data_dir(rq);
- debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
- block, blocks);
+ ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__,
+ block, blocks);
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
memcpy(rq->cmd, pc->c, 12);
pc->rq = rq;
- pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
+ pc->b_count = 0;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
pc->buf = NULL;
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
- pc->b_count = rq->data_len;
+ pc->b_count = 0;
if (rq->data_len && rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
pc->buf = rq->data;
struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;
- debug_log("dev: %s, cmd_type: %x, errors: %d\n",
- rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->cmd_type, rq->errors);
- debug_log("sector: %ld, nr_sectors: %ld, "
- "current_nr_sectors: %d\n", (long)rq->sector,
- rq->nr_sectors, rq->current_nr_sectors);
+ ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
+ "errors: %d\n",
+ __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
+ rq->cmd[0], rq->cmd_type, rq->errors);
+
+ ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, "
+ "current_nr_sectors: %d\n",
+ __func__, (long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);
if (rq->errors >= ERROR_MAX) {
if (floppy->failed_pc)
ide_floppy_report_error(floppy, floppy->failed_pc);
else
- printk(KERN_ERR "ide-floppy: %s: I/O error\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
+
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
if (((long)rq->sector % floppy->bs_factor) ||
(rq->nr_sectors % floppy->bs_factor)) {
- printk(KERN_ERR "%s: unsupported r/w request size\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
+ drive->name);
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
- pc = idefloppy_next_pc_storage(drive);
- idefloppy_create_rw_cmd(floppy, pc, rq, block);
+ pc = &floppy->queued_pc;
+ idefloppy_create_rw_cmd(drive, pc, rq, block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
- pc = idefloppy_next_pc_storage(drive);
+ pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
- blk_dump_rq_flags(rq,
- "ide-floppy: unsupported command in queue");
+ blk_dump_rq_flags(rq, PFX "unsupported command in queue");
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
- pc->rq = rq;
-
- return idefloppy_issue_pc(drive, pc);
-}
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);
-/*
- * Add a special packet command request to the tail of the request queue,
- * and wait for it to be serviced.
- */
-static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct request *rq;
- int error;
+ pc->sg = hwif->sg_table;
+ pc->sg_cnt = hwif->sg_nents;
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->buffer = (char *) pc;
- rq->cmd_type = REQ_TYPE_SPECIAL;
- memcpy(rq->cmd, pc->c, 12);
- error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
- blk_put_request(rq);
+ pc->rq = rq;
- return error;
+ return idefloppy_issue_pc(drive, pc);
}
/*
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
- MODE_SENSE_CURRENT);
+ ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
- " parameters\n");
+ if (ide_queue_pc_tail(drive, disk, &pc)) {
+ printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
- floppy->wp = !!(pc.buf[3] & 0x80);
- set_disk_ro(floppy->disk, floppy->wp);
+
+ if (pc.buf[3] & 0x80)
+ drive->atapi_flags |= IDE_AFLAG_WP;
+ else
+ drive->atapi_flags &= ~IDE_AFLAG_WP;
+
+ set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP));
+
page = &pc.buf[8];
transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
capacity = cyls * heads * sectors * sector_size;
if (memcmp(page, &floppy->flexible_disk_page, 32))
- printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
+ printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, cyls, heads,
sectors, transfer_rate / 8, sector_size, rpm);
lba_capacity = floppy->blocks * floppy->block_size;
if (capacity < lba_capacity) {
- printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
+ printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
return 0;
}
-static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
-
- floppy->srfp = 0;
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
- MODE_SENSE_CURRENT);
-
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
- if (idefloppy_queue_pc_tail(drive, &pc))
- return 1;
-
- floppy->srfp = pc.buf[8 + 2] & 0x40;
- return (0);
-}
-
/*
* Determine if a media is present in the floppy drive, and if so, its LBA
* capacity.
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *cap_desc;
u8 header_len, desc_cnt;
floppy->bs_factor = 1;
set_capacity(floppy->disk, 0);
- idefloppy_create_read_capacity_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ ide_floppy_create_read_capacity_cmd(&pc);
+ if (ide_queue_pc_tail(drive, disk, &pc)) {
+ printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
header_len = pc.buf[3];
blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
- debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
- i, blocks * length / 1024, blocks, length);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
+ "%d sector size\n",
+ i, blocks * length / 1024, blocks, length);
if (i)
continue;
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
if (memcmp(cap_desc, &floppy->cap_desc, 8))
- printk(KERN_INFO "%s: %dkB, %d blocks, %d "
- "sector size\n", drive->name,
- blocks * length / 1024, blocks, length);
+ printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
+ "sector size\n",
+ drive->name, blocks * length / 1024,
+ blocks, length);
memcpy(&floppy->cap_desc, cap_desc, 8);
if (!length || length % 512) {
- printk(KERN_NOTICE "%s: %d bytes block size "
- "not supported\n", drive->name, length);
+ printk(KERN_NOTICE PFX "%s: %d bytes block size"
+ " not supported\n", drive->name, length);
} else {
floppy->blocks = blocks;
floppy->block_size = length;
floppy->bs_factor = length / 512;
if (floppy->bs_factor != 1)
- printk(KERN_NOTICE "%s: warning: non "
- "512 bytes block size not "
- "fully supported\n",
- drive->name);
+ printk(KERN_NOTICE PFX "%s: Warning: "
+ "non 512 bytes block size not "
+ "fully supported\n",
+ drive->name);
rc = 0;
}
break;
* This is a KERN_ERR so it appears on screen
* for the user to see
*/
- printk(KERN_ERR "%s: No disk in drive\n", drive->name);
+ printk(KERN_ERR PFX "%s: No disk in drive\n",
+ drive->name);
break;
case CAPACITY_INVALID:
- printk(KERN_ERR "%s: Invalid capacity for disk "
+ printk(KERN_ERR PFX "%s: Invalid capacity for disk "
"in drive\n", drive->name);
break;
}
- debug_log("Descriptor 0 Code: %d\n",
- pc.buf[desc_start + 4] & 0x03);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n",
+ pc.buf[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
(void) ide_floppy_get_flexible_disk_page(drive);
- set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
- return rc;
-}
-
-/*
- * Obtain the list of formattable capacities.
- * Very similar to ide_floppy_get_capacity, except that we push the capacity
- * descriptors to userland, instead of our own structures.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_capacities {
- * int nformats;
- * struct {
- * int nblocks;
- * int blocksize;
- * } formats[];
- * };
- *
- * userland initializes nformats to the number of allocated formats[] records.
- * On exit we set nformats to the number of records we've actually initialized.
- */
-
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
-{
- struct ide_atapi_pc pc;
- u8 header_len, desc_cnt;
- int i, blocks, length, u_array_size, u_index;
- int __user *argp;
-
- if (get_user(u_array_size, arg))
- return (-EFAULT);
-
- if (u_array_size <= 0)
- return (-EINVAL);
-
- idefloppy_create_read_capacity_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
- return (-EIO);
- }
- header_len = pc.buf[3];
- desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
- u_index = 0;
- argp = arg + 1;
-
- /*
- * We always skip the first capacity descriptor. That's the current
- * capacity. We are interested in the remaining descriptors, the
- * formattable capacities.
- */
- for (i = 1; i < desc_cnt; i++) {
- unsigned int desc_start = 4 + i*8;
-
- if (u_index >= u_array_size)
- break; /* User-supplied buffer too small */
-
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
-
- if (put_user(blocks, argp))
- return(-EFAULT);
- ++argp;
-
- if (put_user(length, argp))
- return (-EFAULT);
- ++argp;
-
- ++u_index;
- }
-
- if (put_user(u_index, arg))
- return (-EFAULT);
- return (0);
-}
-
-/*
- * Get ATAPI_FORMAT_UNIT progress indication.
- *
- * Userland gives a pointer to an int. The int is set to a progress
- * indicator 0-65536, with 65536=100%.
- *
- * If the drive does not support format progress indication, we just check
- * the dsc bit, and return either 0 or 65536.
- */
-
-static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
- int progress_indication = 0x10000;
-
- if (floppy->srfp) {
- idefloppy_create_request_sense_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc))
- return (-EIO);
-
- if (floppy->sense_key == 2 &&
- floppy->asc == 4 &&
- floppy->ascq == 4)
- progress_indication = floppy->progress_indication;
-
- /* Else assume format_unit has finished, and we're at 0x10000 */
- } else {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
- u8 stat;
-
- local_irq_save(flags);
- stat = hwif->tp_ops->read_status(hwif);
- local_irq_restore(flags);
-
- progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
- }
- if (put_user(progress_indication, arg))
- return (-EFAULT);
+ set_capacity(disk, floppy->blocks * floppy->bs_factor);
- return (0);
+ return rc;
}
static sector_t idefloppy_capacity(ide_drive_t *drive)
return capacity;
}
-/*
- * Check whether we can support a drive, based on the ATAPI IDENTIFY command
- * results.
- */
-static int idefloppy_identify_device(ide_drive_t *drive, u16 *id)
-{
- u8 gcw[2];
- u8 device_type, protocol, removable, drq_type, packet_size;
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];
-
- device_type = gcw[1] & 0x1F;
- removable = (gcw[0] & 0x80) >> 7;
- protocol = (gcw[1] & 0xC0) >> 6;
- drq_type = (gcw[0] & 0x60) >> 5;
- packet_size = gcw[0] & 0x03;
-
-#ifdef CONFIG_PPC
- /* kludge for Apple PowerBook internal zip */
- if (device_type == 5 &&
- !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
- strstr((char *)&id[ATA_ID_PROD], "ZIP"))
- device_type = 0;
-#endif
-
- if (protocol != 2)
- printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 0)
- printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
- "to floppy\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
- else if (drq_type == 3)
- printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
- "supported\n", drq_type);
- else if (packet_size != 0)
- printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
- "bytes\n", packet_size);
- else
- return 1;
- return 0;
-}
-
#ifdef CONFIG_IDE_PROC_FS
-static void idefloppy_add_settings(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
- &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
- &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
- &drive->bios_sect, NULL);
- ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
- &floppy->ticks, NULL);
-}
-#else
-static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(ticks, pc_delay);
+
+static const struct ide_proc_devset idefloppy_settings[] = {
+ IDE_PROC_DEVSET(bios_cyl, 0, 1023),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(ticks, 0, 255),
+ { 0 },
+};
#endif
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
u8 gcw[2];
*((u16 *)&gcw) = id[ATA_ID_CONFIG];
- floppy->pc = floppy->pc_stack;
- drive->pc_callback = ide_floppy_callback;
+
+ drive->pc_callback = ide_floppy_callback;
+ drive->pc_update_buffers = idefloppy_update_buffers;
+ drive->pc_io_buffers = ide_io_buffers;
if (((gcw[0] & 0x60) >> 5) == 1)
drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}
if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
+ /* IOMEGA Clik! drives do not support lock/unlock commands */
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
}
(void) ide_floppy_get_capacity(drive);
- idefloppy_add_settings(drive);
+
+ ide_proc_register_driver(drive, floppy->driver);
}
static void ide_floppy_remove(ide_drive_t *drive)
static void idefloppy_cleanup_obj(struct kref *kref)
{
- struct ide_floppy_obj *floppy = to_ide_floppy(kref);
+ struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct gendisk *g = floppy->disk;
.remove = ide_floppy_remove,
.version = IDEFLOPPY_VERSION,
.media = ide_floppy,
- .supports_dsc_overlap = 0,
.do_request = idefloppy_do_request,
.end_request = idefloppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idefloppy_proc,
+ .settings = idefloppy_settings,
#endif
};
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy;
ide_drive_t *drive;
- struct ide_atapi_pc pc;
int ret = 0;
- debug_log("Reached %s\n", __func__);
-
floppy = ide_floppy_get(disk);
if (!floppy)
return -ENXIO;
drive = floppy->drive;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
floppy->openers++;
if (floppy->openers == 1) {
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
/* Just in case */
- idefloppy_init_pc(&pc);
- pc.c[0] = GPCMD_TEST_UNIT_READY;
-
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- idefloppy_create_start_stop_cmd(&pc, 1);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
+ if (ide_do_test_unit_ready(drive, disk))
+ ide_do_start_stop(drive, disk, 1);
if (ide_floppy_get_capacity(drive)
&& (filp->f_flags & O_NDELAY) == 0
goto out_put_floppy;
}
- if (floppy->wp && (filp->f_mode & 2)) {
+ if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) {
ret = -EROFS;
goto out_put_floppy;
}
+
drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
- /* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- idefloppy_create_prevent_cmd(&pc, 1);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
+ ide_set_media_lock(drive, disk, 1);
check_disk_change(inode->i_bdev);
} else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
static int idefloppy_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
- struct ide_atapi_pc pc;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (floppy->openers == 1) {
- /* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- idefloppy_create_prevent_cmd(&pc, 0);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
-
+ ide_set_media_lock(drive, disk, 0);
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
}
static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
geo->heads = drive->bios_head;
unsigned long arg, unsigned int cmd)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
+ int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
if (floppy->openers > 1)
return -EBUSY;
- /* The IOMEGA Clik! Drive doesn't support this command -
- * no room for an eject mechanism */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- int prevent = arg ? 1 : 0;
-
- if (cmd == CDROMEJECT)
- prevent = 0;
+ ide_set_media_lock(drive, disk, prevent);
- idefloppy_create_prevent_cmd(pc, prevent);
- (void) idefloppy_queue_pc_tail(floppy->drive, pc);
- }
-
- if (cmd == CDROMEJECT) {
- idefloppy_create_start_stop_cmd(pc, 2);
- (void) idefloppy_queue_pc_tail(floppy->drive, pc);
- }
+ if (cmd == CDROMEJECT)
+ ide_do_start_stop(drive, disk, 2);
return 0;
}
-static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
- int __user *arg)
-{
- struct ide_atapi_pc pc;
- ide_drive_t *drive = floppy->drive;
- int blocks, length, flags, err = 0;
-
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return -EBUSY;
- }
-
- drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
-
- /*
- * Send ATAPI_FORMAT_UNIT to the drive.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_command {
- * int nblocks;
- * int blocksize;
- * int flags;
- * } ;
- *
- * flags is a bitmask, currently, the only defined flag is:
- *
- * 0x01 - verify media after format.
- */
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- err = -EFAULT;
- goto out;
- }
-
- (void) idefloppy_get_sfrp_bit(drive);
- idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
-
- if (idefloppy_queue_pc_tail(drive, &pc))
- err = -EIO;
-
-out:
- if (err)
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return err;
-}
-
-
static int idefloppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct ide_atapi_pc pc;
void __user *argp = (void __user *)arg;
int err;
- switch (cmd) {
- case CDROMEJECT:
- /* fall through */
- case CDROM_LOCKDOOR:
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
return ide_floppy_lockdoor(drive, &pc, arg, cmd);
- case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
- return 0;
- case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
- case IDEFLOPPY_IOCTL_FORMAT_START:
- if (!(file->f_mode & 2))
- return -EPERM;
-
- return ide_floppy_format_unit(floppy, (int __user *)arg);
- case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return idefloppy_get_format_progress(drive, argp);
- }
+
+ err = ide_floppy_format_ioctl(drive, file, cmd, argp);
+ if (err != -ENOTTY)
+ return err;
/*
* skip SCSI_IOCTL_SEND_COMMAND (deprecated)
if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
bdev->bd_disk, cmd, argp);
- else
- err = -ENOTTY;
if (err == -ENOTTY)
err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
static int idefloppy_media_changed(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
int ret;
static int idefloppy_revalidate_disk(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
set_capacity(disk, idefloppy_capacity(floppy->drive));
return 0;
}
if (!strstr("ide-floppy", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_floppy)
goto failed;
- if (!idefloppy_identify_device(drive, drive->id)) {
- printk(KERN_ERR "ide-floppy: %s: not supported by this version"
- " of ide-floppy\n", drive->name);
+
+ if (!ide_check_atapi_device(drive, DRV_NAME)) {
+ printk(KERN_ERR PFX "%s: not supported by this version of "
+ DRV_NAME "\n", drive->name);
goto failed;
}
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
- printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
- " structure\n", drive->name);
+ printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
+ drive->name);
goto failed;
}
ide_init_disk(g, drive);
- ide_proc_register_driver(drive, &idefloppy_driver);
-
kref_init(&floppy->kref);
floppy->drive = drive;
drive->driver_data = floppy;
+ drive->debug_mask = debug_mask;
+
idefloppy_setup(drive, floppy);
g->minors = 1 << PARTN_BITS;
static int __init idefloppy_init(void)
{
- printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
+ printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n");
return driver_register(&idefloppy_driver.gen_driver);
}
MODULE_ALIAS("ide:*m-floppy*");
+MODULE_ALIAS("ide-floppy");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");