u8 mrdmode = 0;
if (dev->device == PCI_DEVICE_ID_CMD_646) {
- u8 rev = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- switch (rev) {
+ switch (dev->revision) {
case 0x07:
case 0x05:
printk("%s: UltraDMA capable\n", name);
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- u8 rev = 0;
-
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
if (!hwif->dma_base)
return;
- hwif->mwdma_mask = 0x07;
- hwif->ultra_mask = hwif->cds->udma_mask;
-
/*
* UltraDMA only supported on PCI646U and PCI646U2, which
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
- if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5)
+ if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
hwif->ultra_mask = 0x00;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
break;
case PCI_DEVICE_ID_CMD_646:
hwif->chipset = ide_cmd646;
- if (rev == 0x01) {
+ if (dev->revision == 0x01) {
hwif->ide_dma_end = &cmd646_1_ide_dma_end;
break;
- } else if (rev >= 0x03)
+ } else if (dev->revision >= 0x03)
goto alt_irq_bits;
/* fall thru */
default:
}
}
-static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
-{
- return ide_setup_pci_device(dev, d);
-}
-
-static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
-{
- /*
- * The original PCI0646 didn't have the primary channel enable bit,
- * it appeared starting with PCI0646U (i.e. revision ID 3).
- */
- if (dev->revision < 3)
- d->enablebits[0].reg = 0;
-
- return ide_setup_pci_device(dev, d);
-}
-
static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
{ /* 0 */
.name = "CMD643",
- .init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
+ .mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
.name = "CMD646",
- .init_setup = init_setup_cmd646,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
- .udma_mask = 0x07, /* udma0-2 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
},{ /* 2 */
.name = "CMD648",
- .init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
- .udma_mask = 0x1f, /* udma0-4 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
},{ /* 3 */
.name = "CMD649",
- .init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
- .udma_mask = 0x3f, /* udma0-5 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
}
};
-/*
- * We may have to modify enablebits for PCI0646, so we'd better pass
- * a local copy of the ide_pci_device_t structure down the call chain...
- */
static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_pci_device_t d = cmd64x_chipsets[id->driver_data];
+ ide_pci_device_t d;
+ u8 idx = id->driver_data;
+
+ d = cmd64x_chipsets[idx];
+
+ /*
+ * The original PCI0646 didn't have the primary channel enable bit,
+ * it appeared starting with PCI0646U (i.e. revision ID 3).
+ */
+ if (idx == 1 && dev->revision < 3)
+ d.enablebits[0].reg = 0;
- return d.init_setup(dev, &d);
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id cmd64x_pci_tbl[] = {