return retval;
}
+static int wacom_bpt_touch(struct wacom_wac *wacom)
+{
+ struct wacom_features *features = &wacom->features;
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int sp = 0, sx = 0, sy = 0, count = 0;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ int p = data[9 * i + 2];
+ input_mt_slot(input, i);
+ /*
+ * Touch events need to be disabled while stylus is
+ * in proximity because user's hand is resting on touchpad
+ * and sending unwanted events. User expects tablet buttons
+ * to continue working though.
+ */
+ if (p && !wacom->shared->stylus_in_proximity) {
+ int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
+ int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
+ if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
+ x <<= 5;
+ y <<= 5;
+ }
+ input_report_abs(input, ABS_MT_PRESSURE, p);
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ if (wacom->id[i] < 0)
+ wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID;
+ if (!count++)
+ sp = p, sx = x, sy = y;
+ } else {
+ wacom->id[i] = -1;
+ }
+ input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]);
+ }
+
+ input_report_key(input, BTN_TOUCH, count > 0);
+ input_report_key(input, BTN_TOOL_FINGER, count == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2);
+
+ input_report_abs(input, ABS_PRESSURE, sp);
+ input_report_abs(input, ABS_X, sx);
+ input_report_abs(input, ABS_Y, sy);
+
+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+ input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
+ input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
+
+ input_sync(input);
+
+ return 0;
+}
+
+static int wacom_bpt_pen(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
+
+ /*
+ * Similar to Graphire protocol, data[1] & 0x20 is proximity and
+ * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore
+ * 2 unused tool ID's.
+ */
+ prox = (data[1] & 0x30) == 0x30;
+
+ /*
+ * All reports shared between PEN and RUBBER tool must be
+ * forced to a known starting value (zero) when transitioning to
+ * out-of-prox.
+ *
+ * If not reset then, to userspace, it will look like lost events
+ * if new tool comes in-prox with same values as previous tool sent.
+ *
+ * Hardware does report zero in most out-of-prox cases but not all.
+ */
+ if (prox) {
+ if (!wacom->shared->stylus_in_proximity) {
+ if (data[1] & 0x08) {
+ wacom->tool[0] = BTN_TOOL_RUBBER;
+ wacom->id[0] = ERASER_DEVICE_ID;
+ } else {
+ wacom->tool[0] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom->shared->stylus_in_proximity = true;
+ }
+ x = le16_to_cpup((__le16 *)&data[2]);
+ y = le16_to_cpup((__le16 *)&data[4]);
+ p = le16_to_cpup((__le16 *)&data[6]);
+ d = data[8];
+ pen = data[1] & 0x01;
+ btn1 = data[1] & 0x02;
+ btn2 = data[1] & 0x04;
+ }
+
+ input_report_key(input, BTN_TOUCH, pen);
+ input_report_key(input, BTN_STYLUS, btn1);
+ input_report_key(input, BTN_STYLUS2, btn2);
+
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_PRESSURE, p);
+ input_report_abs(input, ABS_DISTANCE, d);
+
+ if (!prox) {
+ wacom->id[0] = 0;
+ wacom->shared->stylus_in_proximity = false;
+ }
+
+ input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
+ input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
+
+ return 1;
+}
+
+static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
+{
+ if (len == WACOM_PKGLEN_BBTOUCH)
+ return wacom_bpt_touch(wacom);
+ else if (len == WACOM_PKGLEN_BBFUN)
+ return wacom_bpt_pen(wacom);
+
+ return 0;
+}
+
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
{
bool sync;
sync = wacom_tpc_irq(wacom_wac, len);
break;
+ case BAMBOO_PT:
+ sync = wacom_bpt_irq(wacom_wac, len);
+ break;
+
default:
sync = false;
break;
input_sync(wacom_wac->input);
}
-static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
+static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->input;
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
- input_set_capability(input_dev, EV_REL, REL_WHEEL);
-
- __set_bit(BTN_LEFT, input_dev->keybit);
- __set_bit(BTN_RIGHT, input_dev->keybit);
- __set_bit(BTN_MIDDLE, input_dev->keybit);
- __set_bit(BTN_SIDE, input_dev->keybit);
- __set_bit(BTN_EXTRA, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
- __set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
- __set_bit(BTN_TOOL_LENS, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+}
+
+static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
+{
+ struct input_dev *input_dev = wacom_wac->input;
+
+ input_set_capability(input_dev, EV_REL, REL_WHEEL);
+
+ wacom_setup_cintiq(wacom_wac);
+
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+ __set_bit(BTN_MIDDLE, input_dev->keybit);
+ __set_bit(BTN_SIDE, input_dev->keybit);
+ __set_bit(BTN_EXTRA, input_dev->keybit);
+ __set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+ __set_bit(BTN_TOOL_LENS, input_dev->keybit);
+
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
}
+void wacom_setup_device_quirks(struct wacom_features *features)
+{
+
+ /* touch device found but size is not defined. use default */
+ if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
+ features->x_max = 1023;
+ features->y_max = 1023;
+ }
+
+ /* these device have multiple inputs */
+ if (features->type == TABLETPC || features->type == TABLETPC2FG ||
+ features->type == BAMBOO_PT)
+ features->quirks |= WACOM_QUIRK_MULTI_INPUT;
+
+ /* quirks for bamboo touch */
+ if (features->type == BAMBOO_PT &&
+ features->device_type == BTN_TOOL_TRIPLETAP) {
+ features->x_max <<= 5;
+ features->y_max <<= 5;
+ features->x_fuzz <<= 5;
+ features->y_fuzz <<= 5;
+ features->pressure_max = 256;
+ features->pressure_fuzz = 16;
+ features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
+ }
+}
+
void wacom_setup_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
__set_bit(BTN_TOUCH, input_dev->keybit);
- input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
+ features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
+ features->y_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
+ features->pressure_fuzz, 0);
__set_bit(ABS_MISC, input_dev->absbit);
__set_bit(BTN_9, input_dev->keybit);
/* fall through */
+ case CINTIQ:
+ for (i = 0; i < 8; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ wacom_setup_cintiq(wacom_wac);
+ break;
+
case INTUOS3:
case INTUOS3L:
- case CINTIQ:
__set_bit(BTN_4, input_dev->keybit);
__set_bit(BTN_5, input_dev->keybit);
__set_bit(BTN_6, input_dev->keybit);
case PENPARTNER:
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
break;
+
+ case BAMBOO_PT:
+ __clear_bit(ABS_MISC, input_dev->absbit);
+
+ if (features->device_type == BTN_TOOL_TRIPLETAP) {
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_FORWARD, input_dev->keybit);
+ __set_bit(BTN_BACK, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+
+ input_mt_create_slots(input_dev, 2);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, features->x_max,
+ features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, features->y_max,
+ features->y_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+ 0, features->pressure_max,
+ features->pressure_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
+ MAX_TRACKING_ID, 0, 0);
+ } else if (features->device_type == BTN_TOOL_PEN) {
+ __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+ __set_bit(BTN_TOOL_PEN, input_dev->keybit);
+ __set_bit(BTN_STYLUS, input_dev->keybit);
+ __set_bit(BTN_STYLUS2, input_dev->keybit);
+ }
+ break;
}
}
{ "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
+static struct wacom_features wacom_features_0xD0 =
+ { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD1 =
+ { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD2 =
+ { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD3 =
+ { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
{ USB_DEVICE_WACOM(0xC6) },
{ USB_DEVICE_WACOM(0xC7) },
{ USB_DEVICE_WACOM(0xCE) },
+ { USB_DEVICE_WACOM(0xD0) },
+ { USB_DEVICE_WACOM(0xD1) },
+ { USB_DEVICE_WACOM(0xD2) },
+ { USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
projects / karo-tx-linux.git / blobdiff