/* Function will be called if the device is unplugged */
static void gigaset_disconnect(struct usb_interface *interface);
+/* functions called before/after suspend */
+static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
+static int gigaset_resume(struct usb_interface *intf);
+
+/* functions called before/after device reset */
+static int gigaset_pre_reset(struct usb_interface *intf);
+static int gigaset_post_reset(struct usb_interface *intf);
+
static int atread_submit(struct cardstate *, int);
static void stopurbs(struct bas_bc_state *);
static int req_submit(struct bc_state *, int, int, int);
spinlock_t lock; /* locks all following */
atomic_t basstate; /* bitmap (BS_*) */
int pending; /* uncompleted base request */
+ wait_queue_head_t waitqueue;
int rcvbuf_size; /* size of AT receive buffer */
/* 0: no receive in progress */
int retry_cmd_in; /* receive req retry count */
#define BS_ATTIMER 0x020 /* waiting for HD_READY_SEND_ATDATA */
#define BS_ATRDPEND 0x040 /* urb_cmd_in in use */
#define BS_ATWRPEND 0x080 /* urb_cmd_out in use */
+#define BS_SUSPEND 0x100 /* USB port suspended */
static struct gigaset_driver *driver = NULL;
.probe = gigaset_probe,
.disconnect = gigaset_disconnect,
.id_table = gigaset_table,
+ .suspend = gigaset_suspend,
+ .resume = gigaset_resume,
+ .reset_resume = gigaset_post_reset,
+ .pre_reset = gigaset_pre_reset,
+ .post_reset = gigaset_post_reset,
};
/* get message text for usb_submit_urb return code
int rc;
update_basstate(ucs, 0, BS_ATRDPEND);
+ wake_up(&ucs->waitqueue);
if (!ucs->rcvbuf_size) {
dev_warn(cs->dev, "%s: no receive in progress\n", __func__);
static int atread_submit(struct cardstate *cs, int timeout)
{
struct bas_cardstate *ucs = cs->hw.bas;
+ int basstate;
int ret;
gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
ucs->rcvbuf_size);
- if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) {
+ basstate = update_basstate(ucs, BS_ATRDPEND, 0);
+ if (basstate & BS_ATRDPEND) {
dev_err(cs->dev,
"could not submit HD_READ_ATMESSAGE: URB busy\n");
return -EBUSY;
}
+ if (basstate & BS_SUSPEND) {
+ dev_notice(cs->dev,
+ "HD_READ_ATMESSAGE not submitted, "
+ "suspend in progress\n");
+ update_basstate(ucs, 0, BS_ATRDPEND);
+ /* treat like disconnect */
+ return -ENODEV;
+ }
+
ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ;
ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE;
ucs->dr_cmd_in.wValue = 0;
}
check_pending(ucs);
+ wake_up(&ucs->waitqueue);
resubmit:
rc = usb_submit_urb(urb, GFP_ATOMIC);
dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n",
pending);
}
+
+ wake_up(&ucs->waitqueue);
}
/* write_ctrl_callback
break;
default: /* any failure */
- if (++ucs->retry_ctrl > BAS_RETRY) {
+ /* don't retry if suspend requested */
+ if (++ucs->retry_ctrl > BAS_RETRY ||
+ (atomic_read(&ucs->basstate) & BS_SUSPEND)) {
dev_err(&ucs->interface->dev,
"control request 0x%02x failed: %s\n",
ucs->dr_ctrl.bRequest,
del_timer(&ucs->timer_ctrl);
ucs->pending = 0;
spin_unlock_irqrestore(&ucs->lock, flags);
+ wake_up(&ucs->waitqueue);
}
/* req_submit
return -ENODEV;
}
+ if (atomic_read(&cs->hw.bas->basstate) & BS_SUSPEND) {
+ dev_notice(cs->dev,
+ "not starting isochronous I/O, "
+ "suspend in progress\n");
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return -EHOSTUNREACH;
+ }
+
if ((ret = starturbs(bcs)) < 0) {
dev_err(cs->dev,
"could not start isochronous I/O for channel B%d: %s\n",
unsigned long flags;
update_basstate(ucs, 0, BS_ATWRPEND);
+ wake_up(&ucs->waitqueue);
/* check status */
switch (status) {
ucs->retry_cmd_out);
break;
}
+ if (atomic_read(&ucs->basstate) & BS_SUSPEND) {
+ dev_warn(cs->dev,
+ "command write: %s, "
+ "won't retry - suspend requested\n",
+ get_usb_statmsg(status));
+ break;
+ }
if (cs->cmdbuf == NULL) {
dev_warn(cs->dev,
"command write: %s, "
int rc;
int retval = 0;
+ /* check if suspend requested */
+ if (atomic_read(&ucs->basstate) & BS_SUSPEND) {
+ gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "suspending");
+ return -EHOSTUNREACH;
+ }
+
/* check if AT channel is open */
if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) {
gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open");
init_timer(&ucs->timer_ctrl);
init_timer(&ucs->timer_atrdy);
init_timer(&ucs->timer_cmd_in);
+ init_waitqueue_head(&ucs->waitqueue);
return 1;
}
gigaset_unassign(cs);
}
+/* gigaset_suspend
+ * This function is called before the USB connection is suspended.
+ */
+static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct cardstate *cs = usb_get_intfdata(intf);
+ struct bas_cardstate *ucs = cs->hw.bas;
+ int basstate;
+ int rc;
+
+ /* set suspend flag; this stops AT command/response traffic */
+ if (update_basstate(ucs, BS_SUSPEND, 0) & BS_SUSPEND) {
+ gig_dbg(DEBUG_SUSPEND, "already suspended");
+ return 0;
+ }
+
+ /* wait a bit for blocking conditions to go away */
+ rc = wait_event_timeout(ucs->waitqueue,
+ !(atomic_read(&ucs->basstate) &
+ (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)),
+ BAS_TIMEOUT*HZ/10);
+ gig_dbg(DEBUG_SUSPEND, "wait_event_timeout() -> %d", rc);
+
+ /* check for conditions preventing suspend */
+ basstate = atomic_read(&ucs->basstate);
+ if (basstate & (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)) {
+ dev_warn(cs->dev, "cannot suspend:\n");
+ if (basstate & BS_B1OPEN)
+ dev_warn(cs->dev, " B channel 1 open\n");
+ if (basstate & BS_B2OPEN)
+ dev_warn(cs->dev, " B channel 2 open\n");
+ if (basstate & BS_ATRDPEND)
+ dev_warn(cs->dev, " receiving AT reply\n");
+ if (basstate & BS_ATWRPEND)
+ dev_warn(cs->dev, " sending AT command\n");
+ update_basstate(ucs, 0, BS_SUSPEND);
+ return -EBUSY;
+ }
+
+ /* close AT channel if open */
+ if (basstate & BS_ATOPEN) {
+ gig_dbg(DEBUG_SUSPEND, "closing AT channel");
+ rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, 0);
+ if (rc) {
+ update_basstate(ucs, 0, BS_SUSPEND);
+ return rc;
+ }
+ wait_event_timeout(ucs->waitqueue, !ucs->pending,
+ BAS_TIMEOUT*HZ/10);
+ /* in case of timeout, proceed anyway */
+ }
+
+ /* kill all URBs and timers that might still be pending */
+ usb_kill_urb(ucs->urb_ctrl);
+ usb_kill_urb(ucs->urb_int_in);
+ del_timer_sync(&ucs->timer_ctrl);
+
+ gig_dbg(DEBUG_SUSPEND, "suspend complete");
+ return 0;
+}
+
+/* gigaset_resume
+ * This function is called after the USB connection has been resumed.
+ */
+static int gigaset_resume(struct usb_interface *intf)
+{
+ struct cardstate *cs = usb_get_intfdata(intf);
+ struct bas_cardstate *ucs = cs->hw.bas;
+ int rc;
+
+ /* resubmit interrupt URB for spontaneous messages from base */
+ rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
+ if (rc) {
+ dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
+ get_usb_rcmsg(rc));
+ return rc;
+ }
+
+ /* clear suspend flag to reallow activity */
+ update_basstate(ucs, 0, BS_SUSPEND);
+
+ gig_dbg(DEBUG_SUSPEND, "resume complete");
+ return 0;
+}
+
+/* gigaset_pre_reset
+ * This function is called before the USB connection is reset.
+ */
+static int gigaset_pre_reset(struct usb_interface *intf)
+{
+ /* handle just like suspend */
+ return gigaset_suspend(intf, PMSG_ON);
+}
+
+/* gigaset_post_reset
+ * This function is called after the USB connection has been reset.
+ */
+static int gigaset_post_reset(struct usb_interface *intf)
+{
+ /* FIXME: send HD_DEVICE_INIT_ACK? */
+
+ /* resume operations */
+ return gigaset_resume(intf);
+}
+
+
static const struct gigaset_ops gigops = {
gigaset_write_cmd,
gigaset_write_room,
projects / mv-sheeva.git / blobdiff