This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
+config LEDS_MIKROTIK_RB532
+ tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS && MIKROTIK_RB532
+ help
+ This option enables support for the so called "User LED" of
+ Mikrotik's Routerboard 532.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
depends on LEDS_CLASS && X86 && EXPERIMENTAL
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+ You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
- and they must be connected to the GPIO lines.
+ and they must be connected to the GPIO lines. The LEDs must be
+ defined as platform devices and/or OpenFirmware platform devices.
+ The code to use these bindings can be selected below.
+
+config LEDS_GPIO_PLATFORM
+ bool "Platform device bindings for GPIO LEDs"
+ depends on LEDS_GPIO
+ default y
+ help
+ Let the leds-gpio driver drive LEDs which have been defined as
+ platform devices. If you don't know what this means, say yes.
+
+config LEDS_GPIO_OF
+ bool "OpenFirmware platform device bindings for GPIO LEDs"
+ depends on LEDS_GPIO && OF_DEVICE
+ default y
+ help
+ Let the leds-gpio driver drive LEDs which have been defined as
+ of_platform devices. For instance, LEDs which are listed in a "dts"
+ file.
+
+config LEDS_LP3944
+ tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS && I2C
+ help
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lp3944.
config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
+ tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
programs through the leds subsystem. This LED have three
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
+config LEDS_DAC124S085
+ tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS && SPI
+ help
+ This option enables support for DAC124S085 SPI DAC from NatSemi,
+ which can be used to control up to four LEDs.
+
+config LEDS_PWM
+ tristate "PWM driven LED Support"
+ depends on LEDS_CLASS && HAVE_PWM
+ help
+ This option enables support for pwm driven LEDs
+
+config LEDS_BD2802
+ tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS && I2C
+ help
+ This option enables support for BD2802GU RGB LED driver chips
+ accessed via the I2C bus.
+
comment "LED Triggers"
config LEDS_TRIGGERS
If unsure, say N.
+config LEDS_TRIGGER_GPIO
+ tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
+ depends on GPIOLIB
+ help
+ This allows LEDs to be controlled by gpio events. It's good
+ when using gpios as switches and triggering the needed LEDs
+ from there. One use case is n810's keypad LEDs that could
+ be triggered by this trigger when user slides up to show
+ keypad.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
depends on LEDS_TRIGGERS