/*
Mantis VP-1034 driver
- Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
#include "mantis_vp1034.h"
+#include "mantis_reg.h"
-struct mb86a16_config vp1034_config = {
+struct mb86a16_config vp1034_mb86a16_config = {
.demod_address = 0x08,
.set_voltage = vp1034_set_voltage,
};
#define MANTIS_MODEL_NAME "VP-1034"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
-struct mantis_hwconfig vp1034_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
-};
-
int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct mantis_pci *mantis = fe->dvb->priv;
switch (voltage) {
case SEC_VOLTAGE_13:
- dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]");
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
- dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]");
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
- dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
break;
default:
- dprintk(verbose, MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage);
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
return -EINVAL;
}
mmwrite(0x00, MANTIS_GPIF_DOUT);
return 0;
}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};