.amux = TV,
.tv = 1,
}, {
- .name = name_comp,
- .vmux = 0,
+ .name = name_comp1,
+ .vmux = 3,
.amux = LINE1,
}, {
.name = name_svideo,
.vmux = 8,
- .amux = LINE1,
+ .amux = LINE2,
} },
.radio = {
.name = name_radio,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ .mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 3,
.name = name_radio,
.amux = LINE2,
},
- /* no DVB support for now */
- /* .mpeg = SAA7134_MPEG_DVB, */
},
[SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = {
.name = "Asus Tiger 3in1",
.tuner_type = TUNER_YMEC_TVF_5533MF,
.radio_type = TUNER_TEA5767,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .radio_addr = 0x60,
.gpiomask = 0x80000700,
.inputs = { {
.name = name_tv,
.amux = 2,
},
},
+ [SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS] = {
+ .name = "Avermedia AVerTV GO 007 FM Plus",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .gpiomask = 0x00300003,
+ /* .gpiomask = 0x8c240003, */
+ .inputs = { {
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x01,
+ }, {
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ .gpio = 0x02,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x00300001,
+ },
+ .mute = {
+ .name = name_mute,
+ .amux = TV,
+ .gpio = 0x01,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
.subvendor = 0x17de,
.subdevice = 0x7128,
.driver_data = SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf31d,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS,
+
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
case SAA7134_BOARD_GENIUS_TVGO_A11MCE:
case SAA7134_BOARD_REAL_ANGEL_220:
case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
+ case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
msleep(10);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ dev->has_remote = SAA7134_REMOTE_I2C;
+ break;
case SAA7134_BOARD_AVERMEDIA_M103:
saa7134_set_gpio(dev, 23, 0);
msleep(10);
case SAA7134_BOARD_BEHOLD_M6:
case SAA7134_BOARD_BEHOLD_M63:
case SAA7134_BOARD_BEHOLD_M6_EXTRA:
+ case SAA7134_BOARD_BEHOLD_H6:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
tun_setup.mode_mask = T_RADIO;
- saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ saa_call_all(dev, tuner, s_type_addr, &tun_setup);
mode_mask &= ~T_RADIO;
}
tun_setup.mode_mask = mode_mask;
- saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ saa_call_all(dev, tuner, s_type_addr, &tun_setup);
}
if (dev->tda9887_conf) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &dev->tda9887_conf;
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
- &tda9887_cfg);
+ saa_call_all(dev, tuner, s_config, &tda9887_cfg);
}
if (dev->tuner_type == TUNER_XC2028) {
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ saa_call_all(dev, tuner, s_config, &xc2028_cfg);
}
}
unsigned char buf;
int board;
+ /* Put here the code that enables the chips that are needed
+ for analog mode and doesn't depend on the tuner attachment.
+ It is also a good idea to get tuner type from eeprom, etc before
+ initializing tuner, since we can avoid loading tuner driver
+ on devices that has TUNER_ABSENT
+ */
switch (dev->board) {
case SAA7134_BOARD_BMK_MPEX_NOTUNER:
case SAA7134_BOARD_BMK_MPEX_TUNER:
+ /* Checks if the device has a tuner at 0x60 addr
+ If the device doesn't have a tuner, TUNER_ABSENT
+ will be used at tuner_type, avoiding loading tuner
+ without needing it
+ */
dev->i2c_client.addr = 0x60;
board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0)
? SAA7134_BOARD_BMK_MPEX_NOTUNER
u8 subaddr;
u8 data[3];
int ret, tuner_t;
-
struct i2c_msg msg[] = {{.addr=0x50, .flags=0, .buf=&subaddr, .len = 1},
{.addr=0x50, .flags=I2C_M_RD, .buf=data, .len = 3}};
+
subaddr= 0x14;
tuner_t = 0;
+
+ /* Retrieve device data from eeprom, checking for the
+ proper tuner_type.
+ */
ret = i2c_transfer(&dev->i2c_adap, msg, 2);
if (ret != 2) {
printk(KERN_ERR "EEPROM read failure\n");
dev->name, saa7134_boards[dev->board].name);
break;
}
+ /* break intentionally omitted */
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
{
- /* The Philips EUROPA based hybrid boards have the tuner connected through
- * the channel decoder. We have to make it transparent to find it
+ /* The Philips EUROPA based hybrid boards have the tuner
+ connected through the channel decoder. We have to make it
+ transparent to find it
*/
u8 data[] = { 0x07, 0x02};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
dev->tuner_type = TUNER_PHILIPS_TDA8290;
- saa7134_tuner_setup(dev);
-
data[2] = 0x68;
i2c_transfer(&dev->i2c_adap, &msg, 1);
-
- /* Tuner setup is handled before I2C transfer.
- Due to that, there's no need to do it later
- */
- return 0;
+ break;
}
i2c_transfer(&dev->i2c_adap, &msg, 1);
break;
}
- case SAA7134_BOARD_ASUSTeK_TVFM7135:
- /* The card below is detected as card=53, but is different */
+ case SAA7134_BOARD_ASUSTeK_TVFM7135:
+ /* The card below is detected as card=53, but is different */
if (dev->autodetected && (dev->eedata[0x27] == 0x03)) {
dev->board = SAA7134_BOARD_ASUSTeK_P7131_ANALOG;
printk(KERN_INFO "%s: P7131 analog only, using "
i2c_transfer(&dev->i2c_adap, &msg, 1);
break;
}
- case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
- case SAA7134_BOARD_KWORLD_ATSC110:
- {
- /* enable tuner */
- int i;
- static const u8 buffer [] = { 0x10, 0x12, 0x13, 0x04, 0x16,
- 0x00, 0x14, 0x04, 0x17, 0x00 };
- dev->i2c_client.addr = 0x0a;
- for (i = 0; i < 5; i++)
- if (2 != i2c_master_send(&dev->i2c_client,
- &buffer[i*2], 2))
- printk(KERN_WARNING
- "%s: Unable to enable tuner(%i).\n",
- dev->name, i);
- break;
- }
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
/* The T200 and the T200A share the same pci id. Consequently,
/* Don't do this if the board was specifically selected with an
* insmod option or if we have the default configuration T200*/
- if(!dev->autodetected || (dev->eedata[0x41] == 0xd0))
+ if (!dev->autodetected || (dev->eedata[0x41] == 0xd0))
break;
- if(dev->eedata[0x41] == 0x02) {
+ if (dev->eedata[0x41] == 0x02) {
/* Reconfigure board as T200A */
dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A;
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
break;
}
break;
+ case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
+ case SAA7134_BOARD_KWORLD_ATSC110:
+ {
+ struct i2c_msg msg = { .addr = 0x0a, .flags = 0 };
+ int i;
+ static u8 buffer[][2] = {
+ { 0x10, 0x12 },
+ { 0x13, 0x04 },
+ { 0x16, 0x00 },
+ { 0x14, 0x04 },
+ { 0x17, 0x00 },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(buffer); i++) {
+ msg.buf = &buffer[i][0];
+ msg.len = ARRAY_SIZE(buffer[0]);
+ if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+ printk(KERN_WARNING
+ "%s: Unable to enable tuner(%i).\n",
+ dev->name, i);
+ }
+ break;
+ }
+ } /* switch() */
+
+ /* initialize tuner */
+ if (TUNER_ABSENT != dev->tuner_type) {
+ int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+
+ /* Note: radio tuner address is always filled in,
+ so we do not need to probe for a radio tuner device. */
+ if (dev->radio_type != UNSET)
+ v4l2_i2c_new_subdev(&dev->i2c_adap,
+ "tuner", "tuner", dev->radio_addr);
+ if (has_demod)
+ v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ if (dev->tuner_addr == ADDR_UNSET) {
+ enum v4l2_i2c_tuner_type type =
+ has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+
+ v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(type));
+ } else {
+ v4l2_i2c_new_subdev(&dev->i2c_adap,
+ "tuner", "tuner", dev->tuner_addr);
+ }
+ }
+
+ saa7134_tuner_setup(dev);
+
+ switch (dev->board) {
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
{
struct v4l2_priv_tun_config tea5767_cfg;
ctl.xtal_freq = TEA5767_HIGH_LO_13MHz;
tea5767_cfg.tuner = TUNER_TEA5767;
tea5767_cfg.priv = &ctl;
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tea5767_cfg);
+ saa_call_all(dev, tuner, s_config, &tea5767_cfg);
break;
}
} /* switch() */
- saa7134_tuner_setup(dev);
-
return 0;
}
projects / mv-sheeva.git / blobdiff