misc: add Qualcomm shared memory driver

[karo-tx-uboot.git] / drivers / misc / Kconfig

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f29a16977426bf60f666cd2ec7816fd3008943e7..c6a753d576b7f176655b08104f533fa3d391f817 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -4,6 +4,22 @@
 
 menu "Multifunction device drivers"
 
+config MISC
+       bool "Enable Driver Model for Misc drivers"
+       depends on DM
+       help
+         Enable driver model for miscellaneous devices. This class is
+         used only for those do not fit other more general classes. A
+         set of generic read, write and ioctl methods may be used to
+         access the device.
+
+config ALTERA_SYSID
+       bool "Altera Sysid support"
+       depends on MISC
+       help
+         Select this to enable a sysid for Altera devices. Please find
+         details on the "Embedded Peripherals IP User Guide" of Altera.
+
 config CMD_CROS_EC
        bool "Enable crosec command"
        depends on CROS_EC
@@ -59,7 +75,7 @@ config CROS_EC_SPI
          provides a faster and more robust interface than I2C but the bugs
          are less interesting.
 
-config CONFIG_FSL_SEC_MON
+config FSL_SEC_MON
        bool "Enable FSL SEC_MON Driver"
        help
          Freescale Security Monitor block is responsible for monitoring
@@ -67,6 +83,39 @@ config CONFIG_FSL_SEC_MON
          Security Monitor can be transitioned on any security failures,
          like software violations or hardware security violations.
 
+config MXC_OCOTP
+       bool "Enable MXC OCOTP Driver"
+       help
+         If you say Y here, you will get support for the One Time
+         Programmable memory pages that are stored on the some
+         Freescale i.MX processors.
+
+config NUVOTON_NCT6102D
+       bool "Enable Nuvoton NCT6102D Super I/O driver"
+       help
+         If you say Y here, you will get support for the Nuvoton
+         NCT6102D Super I/O driver. This can be used to enable or
+         disable the legacy UART, the watchdog or other devices
+         in the Nuvoton Super IO chips on X86 platforms.
+
+config PWRSEQ
+       bool "Enable power-sequencing drivers"
+       depends on DM
+       help
+         Power-sequencing drivers provide support for controlling power for
+         devices. They are typically referenced by a phandle from another
+         device. When the device is started up, its power sequence can be
+         initiated.
+
+config SPL_PWRSEQ
+       bool "Enable power-sequencing drivers for SPL"
+       depends on PWRSEQ
+       help
+         Power-sequencing drivers provide support for controlling power for
+         devices. They are typically referenced by a phandle from another
+         device. When the device is started up, its power sequence can be
+         initiated.
+
 config PCA9551_LED
        bool "Enable PCA9551 LED driver"
        help
@@ -80,13 +129,45 @@ config PCA9551_I2C_ADDR
        help
          The I2C address of the PCA9551 LED controller.
 
-config RESET
-       bool "Enable support for reset drivers"
-       depends on DM
+config QCOM_SMEM
+       bool "Enable Qualcomm shared memory driver"
+
+config TEGRA_CAR
+       bool "Enable support for the Tegra CAR driver"
+       depends on TEGRA_NO_BPMP
+       help
+         The Tegra CAR (Clock and Reset Controller) is a HW module that
+         controls almost all clocks and resets in a Tegra SoC.
+
+config TEGRA186_BPMP
+       bool "Enable support for the Tegra186 BPMP driver"
+       depends on TEGRA186
        help
-         Enable reset drivers which can be used to reset the CPU or board.
-         Each driver can provide a reset method which will be called to
-         effect a reset. The uclass will try all available drivers when
-         reset_walk() is called.
+         The Tegra BPMP (Boot and Power Management Processor) is a separate
+         auxiliary CPU embedded into Tegra to perform power management work,
+         and controls related features such as clocks, resets, power domains,
+         PMIC I2C bus, etc. This driver provides the core low-level
+         communication path by which feature-specific drivers (such as clock)
+         can make requests to the BPMP. This driver is similar to an MFD
+         driver in the Linux kernel.
 
+config WINBOND_W83627
+       bool "Enable Winbond Super I/O driver"
+       help
+         If you say Y here, you will get support for the Winbond
+         W83627 Super I/O driver. This can be used to enable the
+         legacy UART or other devices in the Winbond Super IO chips
+         on X86 platforms.
+
+config QFW
+       bool
+       help
+         Hidden option to enable QEMU fw_cfg interface. This will be selected by
+         either CONFIG_CMD_QFW or CONFIG_GENERATE_ACPI_TABLE.
+
+config I2C_EEPROM
+       bool "Enable driver for generic I2C-attached EEPROMs"
+       depends on MISC
+       help
+         Enable a generic driver for EEPROMs attached via I2C.
 endmenu