]> git.karo-electronics.de Git - linux-beck.git/blobdiff - drivers/mmc/host/at91_mci.c
mmc: at91_mci: Enable MMC_CAP_SDIO_IRQ only when it actually works.
[linux-beck.git] / drivers / mmc / host / at91_mci.c
index 63924e0c7ea9a6c3fab8c2b38857be8832149612..8327daebb396aeeaf2f4a395d9797694c1d14ebe 100644 (file)
 #define at91_mci_read(host, reg)       __raw_readl((host)->baseaddr + (reg))
 #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
 
+#define MCI_BLKSIZE            512
+#define MCI_MAXBLKSIZE                 4095
+#define MCI_BLKATONCE          256
+#define MCI_BUFSIZE            (MCI_BLKSIZE * MCI_BLKATONCE)
 
 /*
  * Low level type for this driver
@@ -227,11 +231,13 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
                        for (index = 0; index < (amount / 4); index++)
                                *dmabuf++ = swab32(sgbuffer[index]);
                } else {
-                       memcpy(dmabuf, sgbuffer, amount);
-                       dmabuf += amount;
+                       char *tmpv = (char *)dmabuf;
+                       memcpy(tmpv, sgbuffer, amount);
+                       tmpv += amount;
+                       dmabuf = (unsigned *)tmpv;
                }
 
-               kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
+               kunmap_atomic(((void *)sgbuffer) - sg->offset, KM_BIO_SRC_IRQ);
 
                if (size == 0)
                        break;
@@ -244,74 +250,6 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
        BUG_ON(size != 0);
 }
 
-/*
- * Prepare a dma read
- */
-static void at91_mci_pre_dma_read(struct at91mci_host *host)
-{
-       int i;
-       struct scatterlist *sg;
-       struct mmc_command *cmd;
-       struct mmc_data *data;
-
-       pr_debug("pre dma read\n");
-
-       cmd = host->cmd;
-       if (!cmd) {
-               pr_debug("no command\n");
-               return;
-       }
-
-       data = cmd->data;
-       if (!data) {
-               pr_debug("no data\n");
-               return;
-       }
-
-       for (i = 0; i < 2; i++) {
-               /* nothing left to transfer */
-               if (host->transfer_index >= data->sg_len) {
-                       pr_debug("Nothing left to transfer (index = %d)\n", host->transfer_index);
-                       break;
-               }
-
-               /* Check to see if this needs filling */
-               if (i == 0) {
-                       if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
-                               pr_debug("Transfer active in current\n");
-                               continue;
-                       }
-               }
-               else {
-                       if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
-                               pr_debug("Transfer active in next\n");
-                               continue;
-                       }
-               }
-
-               /* Setup the next transfer */
-               pr_debug("Using transfer index %d\n", host->transfer_index);
-
-               sg = &data->sg[host->transfer_index++];
-               pr_debug("sg = %p\n", sg);
-
-               sg->dma_address = dma_map_page(NULL, sg_page(sg), sg->offset, sg->length, DMA_FROM_DEVICE);
-
-               pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
-
-               if (i == 0) {
-                       at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
-                       at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
-               }
-               else {
-                       at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
-                       at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
-               }
-       }
-
-       pr_debug("pre dma read done\n");
-}
-
 /*
  * Handle after a dma read
  */
@@ -319,6 +257,8 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
 {
        struct mmc_command *cmd;
        struct mmc_data *data;
+       unsigned int len, i, size;
+       unsigned *dmabuf = host->buffer;
 
        pr_debug("post dma read\n");
 
@@ -334,42 +274,39 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
                return;
        }
 
-       while (host->in_use_index < host->transfer_index) {
-               struct scatterlist *sg;
+       size = data->blksz * data->blocks;
+       len = data->sg_len;
 
-               pr_debug("finishing index %d\n", host->in_use_index);
+       at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
+       at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
 
-               sg = &data->sg[host->in_use_index++];
+       for (i = 0; i < len; i++) {
+               struct scatterlist *sg;
+               int amount;
+               unsigned int *sgbuffer;
 
-               pr_debug("Unmapping page %08X\n", sg->dma_address);
+               sg = &data->sg[i];
 
-               dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
+               sgbuffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+               amount = min(size, sg->length);
+               size -= amount;
 
                if (cpu_is_at91rm9200()) {      /* AT91RM9200 errata */
-                       unsigned int *buffer;
                        int index;
-
-                       /* Swap the contents of the buffer */
-                       buffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-                       pr_debug("buffer = %p, length = %d\n", buffer, sg->length);
-
-                       for (index = 0; index < (sg->length / 4); index++)
-                               buffer[index] = swab32(buffer[index]);
-
-                       kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+                       for (index = 0; index < (amount / 4); index++)
+                               sgbuffer[index] = swab32(*dmabuf++);
+               } else {
+                       char *tmpv = (char *)dmabuf;
+                       memcpy(sgbuffer, tmpv, amount);
+                       tmpv += amount;
+                       dmabuf = (unsigned *)tmpv;
                }
 
-               flush_dcache_page(sg_page(sg));
-
-               data->bytes_xfered += sg->length;
-       }
-
-       /* Is there another transfer to trigger? */
-       if (host->transfer_index < data->sg_len)
-               at91_mci_pre_dma_read(host);
-       else {
-               at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
-               at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
+               kunmap_atomic(((void *)sgbuffer)-sg->offset, KM_BIO_SRC_IRQ);
+               dmac_flush_range((void *)sgbuffer, ((void *)sgbuffer) + amount);
+               data->bytes_xfered += amount;
+               if (size == 0)
+                       break;
        }
 
        pr_debug("post dma read done\n");
@@ -602,10 +539,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
                                /*
                                 * Handle a read
                                 */
-                               host->buffer = NULL;
                                host->total_length = 0;
 
-                               at91_mci_pre_dma_read(host);
+                               at91_mci_write(host, ATMEL_PDC_RPR, host->physical_address);
+                               at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ?
+                                       (blocks * block_length) : (blocks * block_length) / 4);
+                               at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+                               at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+
                                ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
                        }
                        else {
@@ -621,20 +562,8 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
                                        if (host->total_length < 12)
                                                host->total_length = 12;
 
-                               host->buffer = kmalloc(host->total_length, GFP_KERNEL);
-                               if (!host->buffer) {
-                                       pr_debug("Can't alloc tx buffer\n");
-                                       cmd->error = -ENOMEM;
-                                       mmc_request_done(host->mmc, host->request);
-                                       return;
-                               }
-
                                at91_mci_sg_to_dma(host, data);
 
-                               host->physical_address = dma_map_single(NULL,
-                                               host->buffer, host->total_length,
-                                               DMA_TO_DEVICE);
-
                                pr_debug("Transmitting %d bytes\n", host->total_length);
 
                                at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
@@ -701,14 +630,6 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s
        cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
        cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
 
-       if (host->buffer) {
-               dma_unmap_single(NULL,
-                               host->physical_address, host->total_length,
-                               DMA_TO_DEVICE);
-               kfree(host->buffer);
-               host->buffer = NULL;
-       }
-
        pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
                 status, at91_mci_read(host, AT91_MCI_SR),
                 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
@@ -754,7 +675,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
        host->request = mrq;
        host->flags = 0;
 
-       mod_timer(&host->timer, jiffies +  HZ);
+       /* more than 1s timeout needed with slow SD cards */
+       mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
 
        at91_mci_process_next(host);
 }
@@ -942,7 +864,8 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
                        pr_debug("****** Resetting SD-card bus width ******\n");
                        at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
                }
-               mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+               /* 0.5s needed because of early card detect switch firing */
+               mmc_detect_change(host->mmc, msecs_to_jiffies(500));
        }
        return IRQ_HANDLED;
 }
@@ -1006,14 +929,17 @@ static int __init at91_mci_probe(struct platform_device *pdev)
        mmc->f_min = 375000;
        mmc->f_max = 25000000;
        mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-       mmc->caps = MMC_CAP_SDIO_IRQ;
+       mmc->caps = 0;
 
-       mmc->max_blk_size = 4095;
-       mmc->max_blk_count = mmc->max_req_size;
+       mmc->max_blk_size  = MCI_MAXBLKSIZE;
+       mmc->max_blk_count = MCI_BLKATONCE;
+       mmc->max_req_size  = MCI_BUFSIZE;
+       mmc->max_phys_segs = MCI_BLKATONCE;
+       mmc->max_hw_segs   = MCI_BLKATONCE;
+       mmc->max_seg_size  = MCI_BUFSIZE;
 
        host = mmc_priv(mmc);
        host->mmc = mmc;
-       host->buffer = NULL;
        host->bus_mode = 0;
        host->board = pdev->dev.platform_data;
        if (host->board->wire4) {
@@ -1024,6 +950,21 @@ static int __init at91_mci_probe(struct platform_device *pdev)
                                " - using 1 wire\n");
        }
 
+       host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
+                                       &host->physical_address, GFP_KERNEL);
+       if (!host->buffer) {
+               ret = -ENOMEM;
+               dev_err(&pdev->dev, "Can't allocate transmit buffer\n");
+               goto fail5;
+       }
+
+       /* Add SDIO capability when available */
+       if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+               /* AT91SAM9260/9263 erratum */
+               if (host->board->wire4 || !host->board->slot_b)
+                       mmc->caps |= MMC_CAP_SDIO_IRQ;
+       }
+
        /*
         * Reserve GPIOs ... board init code makes sure these pins are set
         * up as GPIOs with the right direction (input, except for vcc)
@@ -1032,7 +973,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
                ret = gpio_request(host->board->det_pin, "mmc_detect");
                if (ret < 0) {
                        dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
-                       goto fail5;
+                       goto fail4b;
                }
        }
        if (host->board->wp_pin) {
@@ -1132,6 +1073,10 @@ fail3:
 fail4:
        if (host->board->det_pin)
                gpio_free(host->board->det_pin);
+fail4b:
+       if (host->buffer)
+               dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
+                               host->buffer, host->physical_address);
 fail5:
        mmc_free_host(mmc);
 fail6:
@@ -1154,6 +1099,10 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
 
        host = mmc_priv(mmc);
 
+       if (host->buffer)
+               dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
+                               host->buffer, host->physical_address);
+
        if (host->board->det_pin) {
                if (device_can_wakeup(&pdev->dev))
                        free_irq(gpio_to_irq(host->board->det_pin), host);