*/
static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
+#ifdef CONFIG_FLASH_CFI_MTD
static uint flash_verbose = 1;
+#else
+#define flash_verbose 1
+#endif
flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#endif
+/*
+ * 0xffff is an undefined value for the configuration register. When
+ * this value is returned, the configuration register shall not be
+ * written at all (default mode).
+ */
+static u16 cfi_flash_config_reg(int i)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+ return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i];
+#else
+ return 0xffff;
+#endif
+}
+
#if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT;
#endif
phys_addr_t cfi_flash_bank_addr(int i)
__attribute__((weak, alias("__cfi_flash_bank_addr")));
+static unsigned long __cfi_flash_bank_size(int i)
+{
+#ifdef CONFIG_SYS_FLASH_BANKS_SIZES
+ return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i];
+#else
+ return 0;
+#endif
+}
+unsigned long cfi_flash_bank_size(int i)
+ __attribute__((weak, alias("__cfi_flash_bank_size")));
+
static void __flash_write8(u8 value, void *addr)
{
__raw_writeb(value, addr);
{
int k;
int size;
- volatile unsigned long *flash;
+ u32 *flash;
/*
* Check if whole sector is erased
*/
size = flash_sector_size(info, i);
- flash = (volatile unsigned long *) info->start[i];
+ flash = (u32 *)info->start[i];
/* divide by 4 for longword access */
size = size >> 2;
for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff)
+ if (flash_read32(flash++) != 0xffffffff)
return 0; /* not erased */
}
return;
}
- printf ("%s FLASH (%d x %d)",
+ printf ("%s flash (%d x %d)",
info->name,
(info->portwidth << 3), (info->chipwidth << 3));
if (info->size < 1024*1024)
#endif
};
+ /*
+ * Flash needs to be in status register read mode for
+ * flash_full_status_check() to work correctly
+ */
+ flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS);
if ((retcode =
flash_full_status_check (info, sector, info->erase_blk_tout,
prot ? "protect" : "unprotect")) == 0) {
int erase_region_size;
int erase_region_count;
struct cfi_qry qry;
+ unsigned long max_size;
memset(&qry, 0, sizeof(qry));
debug ("size_ratio %d port %d bits chip %d bits\n",
size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ info->size = 1 << qry.dev_size;
+ /* multiply the size by the number of chips */
+ info->size *= size_ratio;
+ max_size = cfi_flash_bank_size(banknum);
+ if (max_size && (info->size > max_size)) {
+ debug("[truncated from %ldMiB]", info->size >> 20);
+ info->size = max_size;
+ }
debug ("found %d erase regions\n", num_erase_regions);
sect_cnt = 0;
sector = base;
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
for (j = 0; j < erase_region_count; j++) {
+ if (sector - base >= info->size)
+ break;
if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
printf("ERROR: too many flash sectors\n");
break;
case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
+ /*
+ * Set flash to read-id mode. Otherwise
+ * reading protected status is not
+ * guaranteed.
+ */
+ flash_write_cmd(info, sect_cnt, 0,
+ FLASH_CMD_READ_ID);
info->protect[sect_cnt] =
flash_isset (info, sect_cnt,
FLASH_OFFSET_PROTECT,
}
info->sector_count = sect_cnt;
- info->size = 1 << qry.dev_size;
- /* multiply the size by the number of chips */
- info->size *= size_ratio;
info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size);
tmp = 1 << qry.block_erase_timeout_typ;
info->erase_blk_tout = tmp *
return (info->size);
}
+#ifdef CONFIG_FLASH_CFI_MTD
void flash_set_verbose(uint v)
{
flash_verbose = v;
}
+#endif
+
+static void cfi_flash_set_config_reg(u32 base, u16 val)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+ /*
+ * Only set this config register if really defined
+ * to a valid value (0xffff is invalid)
+ */
+ if (val == 0xffff)
+ return;
+
+ /*
+ * Set configuration register. Data is "encrypted" in the 16 lower
+ * address bits.
+ */
+ flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1)));
+ flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1)));
+
+ /*
+ * Finally issue reset-command to bring device back to
+ * read-array mode
+ */
+ flash_write16(FLASH_CMD_RESET, (void *)base);
+#endif
+}
/*-----------------------------------------------------------------------
*/
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
+ /* Optionally write flash configuration register */
+ cfi_flash_set_config_reg(cfi_flash_bank_addr(i),
+ cfi_flash_config_reg(i));
+
if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
flash_get_size(cfi_flash_bank_addr(i), i);
size += flash_info[i].size;
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
#ifndef CONFIG_SYS_FLASH_QUIET_TEST
- printf ("## Unknown FLASH on Bank %d "
+ printf ("## Unknown flash on Bank %d "
"- Size = 0x%08lx = %ld MB\n",
i+1, flash_info[i].size,
- flash_info[i].size << 20);
+ flash_info[i].size >> 20);
#endif /* CONFIG_SYS_FLASH_QUIET_TEST */
}
#ifdef CONFIG_SYS_FLASH_PROTECTION