if (from + len > flash->mtd.size)
return -EINVAL;
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
+ t[0].tx_buf = flash->command;
+ t[0].len = sizeof(flash->command);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ /* Byte count starts at zero. */
+ if (retlen)
+ *retlen = 0;
+
down(&flash->lock);
/* Wait till previous write/erase is done. */
return 1;
}
- memset(t, 0, (sizeof t));
-
/* NOTE: OPCODE_FAST_READ (if available) is faster... */
/* Set up the write data buffer. */
flash->command[2] = from >> 8;
flash->command[3] = from;
- /* Byte count starts at zero. */
- if (retlen)
- *retlen = 0;
-
- t[0].tx_buf = flash->command;
- t[0].len = sizeof(flash->command);
-
- t[1].rx_buf = buf;
- t[1].len = len;
-
- m.transfers = t;
- m.n_transfer = 2;
-
spi_sync(flash->spi, &m);
*retlen = m.actual_length - sizeof(flash->command);
if (to + len > flash->mtd.size)
return -EINVAL;
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
+ t[0].tx_buf = flash->command;
+ t[0].len = sizeof(flash->command);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ spi_message_add_tail(&t[1], &m);
+
down(&flash->lock);
/* Wait until finished previous write command. */
write_enable(flash);
- memset(t, 0, (sizeof t));
-
/* Set up the opcode in the write buffer. */
flash->command[0] = OPCODE_PP;
flash->command[1] = to >> 16;
flash->command[2] = to >> 8;
flash->command[3] = to;
- t[0].tx_buf = flash->command;
- t[0].len = sizeof(flash->command);
-
- m.transfers = t;
- m.n_transfer = 2;
-
/* what page do we start with? */
page_offset = to % FLASH_PAGESIZE;
/* do all the bytes fit onto one page? */
if (page_offset + len <= FLASH_PAGESIZE) {
- t[1].tx_buf = buf;
t[1].len = len;
spi_sync(flash->spi, &m);
/* the size of data remaining on the first page */
page_size = FLASH_PAGESIZE - page_offset;
- t[1].tx_buf = buf;
t[1].len = page_size;
spi_sync(flash->spi, &m);